Advances in bioprinted cell-laden hydrogels for skin tissue engineering
暂无分享,去创建一个
P. Bártolo | A. Bayat | P. Granja | A. Sousa | C. Barrias | R. Pereira
[1] I. Bae,et al. Bioprinting of biomimetic skin containing melanocytes , 2018, Experimental dermatology.
[2] S. Soker,et al. A tunable hydrogel system for long-term release of cell-secreted cytokines and bioprinted in situ wound cell delivery. , 2017, Journal of biomedical materials research. Part B, Applied biomaterials.
[3] V. Kolaitytė,et al. The use of modern dressings in managing split-thickness skin graft donor sites: a single-centre randomised controlled trial. , 2017, Journal of wound care.
[4] D. Cho,et al. Direct 3D cell-printing of human skin with functional transwell system , 2017, Biofabrication.
[5] Wenxin Wang,et al. Injectable and Tunable Gelatin Hydrogels Enhance Stem Cell Retention and Improve Cutaneous Wound Healing , 2017 .
[6] Paulo Jorge Da Silva bartolo,et al. Engineering the vasculature with additive manufacturing , 2017 .
[7] Liliang Ouyang,et al. A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo‐crosslinkable Inks , 2017, Advanced materials.
[8] Léa J Pourchet,et al. Human Skin 3D Bioprinting Using Scaffold‐Free Approach , 2017, Advanced healthcare materials.
[9] Shoji Takeuchi,et al. Skin integrated with perfusable vascular channels on a chip. , 2017, Biomaterials.
[10] Diego Velasco,et al. 3D bioprinting of functional human skin: production and in vivo analysis , 2016, Biofabrication.
[11] K. Harding,et al. Estimating the costs associated with the management of patients with chronic wounds using linked routine data , 2016, International wound journal.
[12] S. Yang,et al. Hyaluronate-Epidermal Growth Factor Conjugate for Skin Wound Healing and Regeneration. , 2016, Biomacromolecules.
[13] Nanbo Liu,et al. 3D bioprinting matrices with controlled pore structure and release function guide in vitro self-organization of sweat gland , 2016, Scientific Reports.
[14] Yuki Hori,et al. Dual‐Stage Crosslinking of a Gel‐Phase Bioink Improves Cell Viability and Homogeneity for 3D Bioprinting , 2016, Advanced healthcare materials.
[15] Ali Khademhosseini,et al. Vascularization and Angiogenesis in Tissue Engineering: Beyond Creating Static Networks. , 2016, Trends in biotechnology.
[16] Ursula Graf-Hausner,et al. Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells , 2016, Journal of laboratory automation.
[17] S. Sia,et al. Human Skin Constructs with Spatially Controlled Vasculature Using Primary and iPSC‐Derived Endothelial Cells , 2016, Advanced healthcare materials.
[18] Gordon G Wallace,et al. Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells , 2016, Advanced healthcare materials.
[19] P. Bártolo,et al. Traditional Therapies for Skin Wound Healing. , 2016, Advances in wound care.
[20] J. Burdick,et al. A practical guide to hydrogels for cell culture , 2016, Nature Methods.
[21] MyungGu Yeo,et al. An Innovative Collagen-Based Cell-Printing Method for Obtaining Human Adipose Stem Cell-Laden Structures Consisting of Core-Sheath Structures for Tissue Engineering. , 2016, Biomacromolecules.
[22] Dong-Woo Cho,et al. Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking. , 2016, Acta biomaterialia.
[23] S. Mueller,et al. Povidone‐iodine ointment demonstrates in vitro efficacy against biofilm formation , 2016, International wound journal.
[24] Mark A. Skylar-Scott,et al. Three-dimensional bioprinting of thick vascularized tissues , 2016, Proceedings of the National Academy of Sciences.
[25] N. Mirazi,et al. Effect of topical mixture of honey, royal jelly and olive oil-propolis extract on skin wound healing in diabetic rats , 2016 .
[26] B. Yao,et al. 3D bioprinted extracellular matrix mimics facilitate directed differentiation of epithelial progenitors for sweat gland regeneration. , 2016, Acta biomaterialia.
[27] James J. Yoo,et al. A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.
[28] T. Scheibel,et al. Strategies and Molecular Design Criteria for 3D Printable Hydrogels. , 2016, Chemical reviews.
[29] Horst Fischer,et al. Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity , 2016, Advanced healthcare materials.
[30] M. Marazzi,et al. Skin substitutes based on allogenic fibroblasts or keratinocytes for chronic wounds not responding to conventional therapy: a retrospective observational study , 2016, International wound journal.
[31] T. Woodfield,et al. Biofabrication: reappraising the definition of an evolving field , 2016, Biofabrication.
[32] D. Kenkel,et al. Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials , 2015 .
[33] Mei Bigliardi-Qi,et al. Fibroblast heterogeneity and its implications for engineering organotypic skin models in vitro. , 2015, European journal of cell biology.
[34] Anthony Atala,et al. A hydrogel bioink toolkit for mimicking native tissue biochemical and mechanical properties in bioprinted tissue constructs. , 2015, Acta biomaterialia.
[35] Xiaofeng Cui,et al. Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging. , 2015, Biotechnology journal.
[36] J. Buján,et al. Bioactive bilayered dressing for compromised epidermal tissue regeneration with sequential activity of complementary agents. , 2015, Acta biomaterialia.
[37] D. Cho,et al. Biomimetic 3D tissue printing for soft tissue regeneration. , 2015, Biomaterials.
[38] C. Highley,et al. Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels , 2015, Advanced materials.
[39] Marcy Zenobi-Wong,et al. Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting , 2015, Biofabrication.
[40] C. Reijnders,et al. Development of a Full-Thickness Human Skin Equivalent In Vitro Model Derived from TERT-Immortalized Keratinocytes and Fibroblasts , 2015, Tissue engineering. Part A.
[41] J. Rogers,et al. Inkjet Printing of Regenerated Silk Fibroin: From Printable Forms to Printable Functions , 2015, Advanced materials.
[42] P. Hammond,et al. Combination Growth Factor Therapy via Electrostatically Assembled Wound Dressings Improves Diabetic Ulcer Healing In Vivo , 2015, Advanced healthcare materials.
[43] Paulo Jorge Da Silva Bartolo,et al. 3D Photo-Fabrication for Tissue Engineering and Drug Delivery , 2015 .
[44] Ibrahim T. Ozbolat,et al. Bioprinting scale-up tissue and organ constructs for transplantation. , 2015, Trends in biotechnology.
[45] A. Bayat,et al. A comprehensive evidence-based review on the role of topicals and dressings in the management of skin scarring , 2015, Archives of Dermatological Research.
[46] C. Cetrulo,et al. Genetically modified porcine split-thickness skin grafts as an alternative to allograft for provision of temporary wound coverage: preliminary characterization. , 2015, Burns : journal of the International Society for Burn Injuries.
[47] P. Gatenholm,et al. 3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.
[48] Dongsheng Liu,et al. Rapid formation of a supramolecular polypeptide-DNA hydrogel for in situ three-dimensional multilayer bioprinting. , 2015, Angewandte Chemie.
[49] Alexandra L. Rutz,et al. A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels , 2015, Advanced materials.
[50] B. Lee,et al. Printing cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking , 2015, Biomedical microdevices.
[51] F. Watt,et al. Understanding fibroblast heterogeneity in the skin. , 2015, Trends in cell biology.
[52] Barbara Rothen-Rutishauser,et al. Engineering an in vitro air-blood barrier by 3D bioprinting , 2015, Scientific Reports.
[53] Daniel S. Widmer,et al. Characterization of pigmented dermo‐epidermal skin substitutes in a long‐term in vivo assay , 2015, Experimental dermatology.
[54] Sei Kwang Hahn,et al. In situ-forming injectable hydrogels for regenerative medicine , 2014 .
[55] P. Granja,et al. Engineering proteolytically-degradable artificial extracellular matrices , 2014 .
[56] B. Derby,et al. Inkjet printing biomaterials for tissue engineering: bioprinting , 2014 .
[57] David J Mooney,et al. Influence of the stiffness of three-dimensional alginate/collagen-I interpenetrating networks on fibroblast biology. , 2014, Biomaterials.
[58] Ying Mei,et al. Engineering alginate as bioink for bioprinting. , 2014, Acta biomaterialia.
[59] F. Guillemot,et al. Controlling laser-induced jet formation for bioprinting mesenchymal stem cells with high viability and high resolution , 2014, Biofabrication.
[60] S. Yoo,et al. Creating perfused functional vascular channels using 3D bio-printing technology. , 2014, Biomaterials.
[61] Ardeshir Bayat,et al. Regenerative healing, scar‐free healing and scar formation across the species: current concepts and future perspectives , 2014, Experimental dermatology.
[62] Anthony Atala,et al. 3D bioprinting of tissues and organs , 2014, Nature Biotechnology.
[63] Yahya E Choonara,et al. A comprehensive review of advanced biopolymeric wound healing systems. , 2014, Journal of pharmaceutical sciences.
[64] Josep A Planell,et al. Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers , 2014, Biofabrication.
[65] Ali Khademhosseini,et al. 3D biofabrication strategies for tissue engineering and regenerative medicine. , 2014, Annual review of biomedical engineering.
[66] S. E. James,et al. The in vitro characterization of a gelatin scaffold, prepared by cryogelation and assessed in vivo as a dermal replacement in wound repair. , 2014, Acta biomaterialia.
[67] Wouter J A Dhert,et al. Prolonged presence of VEGF promotes vascularization in 3D bioprinted scaffolds with defined architecture. , 2014, Journal of controlled release : official journal of the Controlled Release Society.
[68] Deok‐Ho Kim,et al. Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink , 2014, Nature Communications.
[69] A. Khademhosseini,et al. Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs. , 2014, Lab on a chip.
[70] Ivan Martin,et al. Tissue-engineered dermo-epidermal skin grafts prevascularized with adipose-derived cells. , 2014, Biomaterials.
[71] Pankaj Karande,et al. Design and fabrication of human skin by three-dimensional bioprinting. , 2014, Tissue engineering. Part C, Methods.
[72] M. Augustin,et al. Cost‐of‐illness of leg ulcers in the community , 2014, International wound journal.
[73] J. Lewis,et al. 3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.
[74] E. Kapetanovic,et al. Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells. , 2014, Acta biomaterialia.
[75] F. Nestle,et al. Mechanisms regulating skin immunity and inflammation , 2014, Nature Reviews Immunology.
[76] Nupura S. Bhise,et al. Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels , 2014, Biofabrication.
[77] M. Akashi,et al. Inkjet printing of layer-by-layer assembled poly(lactide) stereocomplex with encapsulated proteins. , 2014, Langmuir : the ACS journal of surfaces and colloids.
[78] Paulo Jorge Da Silva Bartolo,et al. Photopolymerizable hydrogels in regenerative medicine and drug delivery , 2014 .
[79] Ralph Müller,et al. Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting. , 2014, Acta biomaterialia.
[80] Chaenyung Cha,et al. 25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine , 2014, Advanced materials.
[81] I. Hutchings,et al. Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing , 2013, Biofabrication.
[82] A. Bayat,et al. Current understanding of molecular and cellular mechanisms in fibroplasia and angiogenesis during acute wound healing. , 2013, Journal of dermatological science.
[83] P. Bártolo,et al. Influence of Aloe vera on water absorption and enzymatic in vitro degradation of alginate hydrogel films. , 2013, Carbohydrate polymers.
[84] T. Hirth,et al. Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting. , 2013, Journal of materials chemistry. B.
[85] P. Netti,et al. The role of microscaffold properties in controlling the collagen assembly in 3D dermis equivalent using modular tissue engineering. , 2013, Biomaterials.
[86] Vahid Hosseini,et al. Comparison of silver nylon wound dressing and silver sulfadiazine in partial burn wound therapy , 2013, International wound journal.
[87] Wim E Hennink,et al. 25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.
[88] S. Gibbs,et al. Autologous skin substitute for hard‐to‐heal ulcers: Retrospective analysis on safety, applicability, and efficacy in an outpatient and hospitalized setting , 2013, Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society.
[89] E. Caterson,et al. Tissue engineering of skin. , 2013, Journal of the American College of Surgeons.
[90] A. Bayat,et al. Interactions of the Extracellular Matrix and Progenitor Cells in Cutaneous Wound Healing. , 2013, Advances in wound care.
[91] Harrie Weinans,et al. Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats , 2013, PloS one.
[92] Johnson H. Y. Chung,et al. Bio-ink properties and printability for extrusion printing living cells. , 2013, Biomaterials science.
[93] P. R. van Weeren,et al. Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs. , 2013, Macromolecular bioscience.
[94] Pedro L Granja,et al. Advanced biofabrication strategies for skin regeneration and repair. , 2013, Nanomedicine.
[95] N. Johnson,et al. Controlled delivery of heparin-binding EGF-like growth factor yields fast and comprehensive wound healing. , 2013, Journal of controlled release : official journal of the Controlled Release Society.
[96] P. Vogt,et al. Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice , 2013, PloS one.
[97] A. Bayat,et al. The role of skin substitutes in the management of chronic cutaneous wounds , 2013, Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society.
[98] N. Brusselaers,et al. Keratinocytes in the treatment of severe burn injury: an update , 2013, International wound journal.
[99] Zev J Gartner,et al. Directing the assembly of spatially organized multicomponent tissues from the bottom up. , 2012, Trends in cell biology.
[100] James J. Yoo,et al. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications , 2012, Biofabrication.
[101] K. Cheung,et al. Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions , 2012, Biotechnology and bioengineering.
[102] James J. Yoo,et al. Bioprinted Amniotic Fluid‐Derived Stem Cells Accelerate Healing of Large Skin Wounds , 2012, Stem cells translational medicine.
[103] R. Sivamani,et al. Phytochemicals and Naturally Derived Substances for Wound Healing. , 2012, Advances in wound care.
[104] Robert J Snyder,et al. Spray-applied cell therapy with human allogeneic fibroblasts and keratinocytes for the treatment of chronic venous leg ulcers: a phase 2, multicentre, double-blind, randomised, placebo-controlled trial , 2012, The Lancet.
[105] H. Thu,et al. Alginate based bilayer hydrocolloid films as potential slow-release modern wound dressing. , 2012, International journal of pharmaceutics.
[106] Xiaofeng Cui,et al. Synergistic action of fibroblast growth factor‐2 and transforming growth factor‐beta1 enhances bioprinted human neocartilage formation , 2012, Biotechnology and bioengineering.
[107] GeunHyung Kim,et al. Cells (MC3T3-E1)-laden alginate scaffolds fabricated by a modified solid-freeform fabrication process supplemented with an aerosol spraying. , 2012, Biomacromolecules.
[108] Hyeongjin Lee,et al. Fabrication of cell-laden three-dimensional alginate-scaffolds with an aerosol cross-linking process , 2012 .
[109] P. Bártolo,et al. Additive manufacturing of tissues and organs , 2012 .
[110] A. Schambach,et al. Skin tissue generation by laser cell printing , 2012, Biotechnology and bioengineering.
[111] Byung Kook Lee,et al. Fabrication of drug-loaded polymer microparticles with arbitrary geometries using a piezoelectric inkjet printing system. , 2012, International journal of pharmaceutics.
[112] R. Wolf,et al. Structure and function of the epidermis related to barrier properties. , 2012, Clinics in dermatology.
[113] H. Robenek,et al. The Epidermal Basement Membrane Is a Composite of Separate Laminin- or Collagen IV-containing Networks Connected by Aggregated Perlecan, but Not by Nidogens* , 2012, The Journal of Biological Chemistry.
[114] A. Bayat,et al. Extracellular matrix molecules implicated in hypertrophic and keloid scarring , 2012, Journal of the European Academy of Dermatology and Venereology : JEADV.
[115] Sharon Gerecht,et al. Dextran hydrogel scaffolds enhance angiogenic responses and promote complete skin regeneration during burn wound healing , 2011, Proceedings of the National Academy of Sciences.
[116] Douglas B. Chrisey,et al. Matrix-assisted pulsed laser methods for biofabrication , 2011 .
[117] R. Beelen,et al. Macrophages in skin injury and repair. , 2011, Immunobiology.
[118] Giovanni Vozzi,et al. Substrate stiffness influences high resolution printing of living cells with an ink-jet system. , 2011, Journal of bioscience and bioengineering.
[119] Stuart K Williams,et al. Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.
[120] Mathias Wilhelmi,et al. Laser printing of three-dimensional multicellular arrays for studies of cell-cell and cell-environment interactions. , 2011, Tissue engineering. Part C, Methods.
[121] Jos Malda,et al. A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering , 2011 .
[122] J Malda,et al. Bioprinting of hybrid tissue constructs with tailorable mechanical properties , 2011, Biofabrication.
[123] Katja Schenke-Layland,et al. Skin tissue engineering--in vivo and in vitro applications. , 2011, Advanced drug delivery reviews.
[124] Esther Novosel,et al. Vascularization is the key challenge in tissue engineering. , 2011, Advanced drug delivery reviews.
[125] P. R. van Weeren,et al. Hyaluronic acid and dextran-based semi-IPN hydrogels as biomaterials for bioprinting. , 2011, Biomacromolecules.
[126] Fabien Guillemot,et al. Cell patterning technologies for organotypic tissue fabrication. , 2011, Trends in biotechnology.
[127] Takeo Kanade,et al. Spatially directed guidance of stem cell population migration by immobilized patterns of growth factors. , 2011, Biomaterials.
[128] F. Guillemot,et al. Effect of laser energy, substrate film thickness and bioink viscosity on viability of endothelial cells printed by Laser-Assisted Bioprinting , 2011 .
[129] S. Van Vlierberghe,et al. Biopolymer-based hydrogels as scaffolds for tissue engineering applications: a review. , 2011, Biomacromolecules.
[130] Jiangang Lu,et al. Application of inkjet printing technique for biological material delivery and antimicrobial assays. , 2011, Analytical biochemistry.
[131] Claudia Unger,et al. Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting , 2011, Biomedical engineering online.
[132] A. Bayat,et al. Dermal substitute-assisted healing: enhancing stem cell therapy with novel biomaterial design , 2011, Archives of Dermatological Research.
[133] Benoit Hendrickx,et al. Cell-based vascularization strategies for skin tissue engineering. , 2011, Tissue engineering. Part B, Reviews.
[134] G. Prestwich,et al. Dynamically Crosslinked Gold Nanoparticle – Hyaluronan Hydrogels , 2010, Advanced materials.
[135] F. Guillemot,et al. Laser assisted bioprinting of engineered tissue with high cell density and microscale organization. , 2010, Biomaterials.
[136] Nan Ma,et al. Laser printing of skin cells and human stem cells. , 2010, Tissue engineering. Part C, Methods.
[137] Anthony Atala,et al. In situ bioprinting of the skin for burns , 2010 .
[138] T. Boland,et al. Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells , 2010, Biotechnology and bioengineering.
[139] Yong Huang,et al. Laser-based direct-write techniques for cell printing , 2010, Biofabrication.
[140] B. Derby. Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution , 2010 .
[141] P. Netti,et al. Engineered dermal equivalent tissue in vitro by assembly of microtissue precursors. , 2010, Acta biomaterialia.
[142] A. Khademhosseini,et al. Cell-laden microengineered gelatin methacrylate hydrogels. , 2010, Biomaterials.
[143] F. Guillemot,et al. High-throughput laser printing of cells and biomaterials for tissue engineering. , 2010, Acta biomaterialia.
[144] Shih-Jung Liu,et al. Electrospun PLGA/collagen nanofibrous membrane as early-stage wound dressing , 2010 .
[145] G. Prestwich,et al. Photocrosslinkable hyaluronan-gelatin hydrogels for two-step bioprinting. , 2010, Tissue engineering. Part A.
[146] Yong Woo Cho,et al. Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates , 2010 .
[147] Douglas B. Chrisey,et al. Effect of laser fluence in laser‐assisted direct writing of human colon cancer cell , 2010 .
[148] Fabien Guillemot,et al. Laser-assisted cell printing: principle, physical parameters versus cell fate and perspectives in tissue engineering. , 2010, Nanomedicine.
[149] Vladimir Mironov,et al. Bioprinting is coming of age: report from the International Conference on Bioprinting and Biofabrication in Bordeaux (3B'09) , 2010, Biofabrication.
[150] Fabien Guillemot,et al. In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice , 2010, Biofabrication.
[151] B R Ringeisen,et al. Development of human umbilical vein endothelial cell (HUVEC) and human umbilical vein smooth muscle cell (HUVSMC) branch/stem structures on hydrogel layers via biological laser printing (BioLP) , 2010, Biofabrication.
[152] Zee Upton,et al. Development of a three-dimensional human skin equivalent wound model for investigating novel wound healing therapies. , 2010, Tissue engineering. Part C, Methods.
[153] S. E. James,et al. A review of tissue-engineered skin bioconstructs available for skin reconstruction , 2010, Journal of The Royal Society Interface.
[154] L. DiPietro,et al. Factors Affecting Wound Healing , 2010, Journal of dental research.
[155] A Tirella,et al. A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds , 2009, Biofabrication.
[156] B. Atiyeh,et al. Wound cleansing, topical antiseptics and wound healing , 2009, International wound journal.
[157] T. K. Hunt,et al. Human skin wounds: A major and snowballing threat to public health and the economy , 2009, Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society.
[158] L. Niklason,et al. Scaffold-free vascular tissue engineering using bioprinting. , 2009, Biomaterials.
[159] T. Boland,et al. Human microvasculature fabrication using thermal inkjet printing technology. , 2009, Biomaterials.
[160] Chunmao Han,et al. A multicenter clinical trial of recombinant human GM‐CSF hydrogel for the treatment of deep second‐degree burns , 2009, Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society.
[161] Ravi S Kane,et al. The influence of hydrogel modulus on the proliferation and differentiation of encapsulated neural stem cells. , 2009, Biomaterials.
[162] Michele Marcolongo,et al. Characterization of cell viability during bioprinting processes. , 2009, Biotechnology journal.
[163] S. Hosseinimehr,et al. Aloe versus silver sulfadiazine creams for second-degree burns: A randomized controlled study , 2009, Surgery Today.
[164] Matthew E. Pepper,et al. EDTA enhances high‐throughput two‐dimensional bioprinting by inhibiting salt scaling and cell aggregation at the nozzle surface , 2009, Journal of tissue engineering and regenerative medicine.
[165] L. Grover,et al. An alginate hydrogel matrix for the localised delivery of a fibroblast/keratinocyte co-culture. , 2009, Biotechnology journal.
[166] Vladimir Mironov,et al. Organ printing: tissue spheroids as building blocks. , 2009, Biomaterials.
[167] A. Khademhosseini,et al. Modular Tissue Engineering: Engineering Biological Tissues from the Bottom Up. , 2009, Soft matter.
[168] E. A. Nelson,et al. Larval therapy for leg ulcers (VenUS II): randomised controlled trial , 2009, BMJ : British Medical Journal.
[169] Karl R Edminster,et al. Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication. , 2009, Biomaterials.
[170] J. Brandner,et al. The skin: an indispensable barrier , 2008, Experimental dermatology.
[171] J. Boateng,et al. Wound healing dressings and drug delivery systems: a review. , 2008, Journal of pharmaceutical sciences.
[172] W. Jeffcoate,et al. A systematic review of the effectiveness of interventions to enhance the healing of chronic ulcers of the foot in diabetes , 2008, Diabetes/metabolism research and reviews.
[173] W. Hennink,et al. In situ gelling hydrogels for pharmaceutical and biomedical applications. , 2008, International journal of pharmaceutics.
[174] W. Dhert,et al. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. , 2008, Tissue engineering. Part A.
[175] Wei Sun,et al. Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing. , 2008, Tissue engineering. Part A.
[176] D. Hollander,et al. Randomised clinical trial of Hydrofiber dressing with silver versus povidone–iodine gauze in the management of open surgical and traumatic wounds , 2007, International wound journal.
[177] Sheila MacNeil,et al. Progress and opportunities for tissue-engineered skin , 2007, Nature.
[178] Bradley R Ringeisen,et al. Jet‐based methods to print living cells , 2006, Biotechnology journal.
[179] S. Spiekstra,et al. Autologous full‐thickness skin substitute for healing chronic wounds , 2006, The British journal of dermatology.
[180] Jooho Moon,et al. Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing. , 2006, Langmuir : the ACS journal of surfaces and colloids.
[181] Paul Martin,et al. Inflammatory cells during wound repair: the good, the bad and the ugly. , 2005, Trends in cell biology.
[182] J. Hubbell,et al. Synthetic biomaterials as instructive extracellular microenvironments for morphogenesis in tissue engineering , 2005, Nature Biotechnology.
[183] Douglas B. Chrisey,et al. Application of laser printing to mammalian cells , 2004 .
[184] Milica Radisic,et al. Medium perfusion enables engineering of compact and contractile cardiac tissue. , 2004, American journal of physiology. Heart and circulatory physiology.
[185] D. Mooney,et al. Hydrogels for tissue engineering: scaffold design variables and applications. , 2003, Biomaterials.
[186] T. Boland,et al. Cell and organ printing 2: fusion of cell aggregates in three-dimensional gels. , 2003, The anatomical record. Part A, Discoveries in molecular, cellular, and evolutionary biology.
[187] Jennifer L West,et al. Effects of nitric oxide releasing poly(vinyl alcohol) hydrogel dressings on dermal wound healing in diabetic mice , 2002, Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society.
[188] Y. Takema,et al. Dermal fluid translocation is an important determinant of the diurnal variation in human skin thickness , 2001, The British journal of dermatology.
[189] D. Odde,et al. Laser-guided direct writing of living cells. , 2000, Biotechnology and bioengineering.
[190] C Torrance,et al. The physiology of wound healing. , 1986, Nursing.
[191] Marcel A. Heinrich,et al. Rapid Continuous Multimaterial Extrusion Bioprinting , 2017, Advanced materials.
[192] A. J. Putnam,et al. Endothelial sprouting and network formation in collagen- and fibrin-based modular microbeads. , 2016, Acta biomaterialia.
[193] Xiaobing Fu,et al. Hypoxia pretreatment of bone marrow—derived mesenchymal stem cells seeded in a collagen‐chitosan sponge scaffold promotes skin wound healing in diabetic rats with hindlimb ischemia , 2016, Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society.
[194] B. S. Schon,et al. Modular Tissue Assembly Strategies for Biofabrication of Engineered Cartilage , 2016, Annals of Biomedical Engineering.
[195] Ibrahim T. Ozbolat,et al. Current advances and future perspectives in extrusion-based bioprinting. , 2016, Biomaterials.
[196] Hyeongjin Lee,et al. Phage as versatile nanoink for printing 3-D cell-laden scaffolds. , 2016, Acta biomaterialia.
[197] A. Khademhosseini,et al. Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink , 2016, Advanced materials.
[198] Julio Rincon,et al. In vivo assessment of printed microvasculature in a bilayer skin graft to treat full-thickness wounds. , 2015, Tissue engineering. Part A.
[199] David Eglin,et al. A versatile bioink for three-dimensional printing of cellular scaffolds based on thermally and photo-triggered tandem gelation. , 2015, Acta biomaterialia.
[200] Dong-Woo Cho,et al. Bioprintable, cell-laden silk fibroin-gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs. , 2015, Acta biomaterialia.
[201] Hong Li,et al. Molecular events underlying maggot extract promoted rat in vivo and human in vitro skin wound healing , 2015, Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society.
[202] P. Dubruel,et al. The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.
[203] Paulo Jorge Da Silva bartolo,et al. Photocrosslinkable Materials for the Fabrication of Tissue-Engineered Constructs by Stereolithography , 2014 .
[204] P. J. Bártolo,et al. 10.10 – Recent Advances in Additive Biomanufacturing , 2014 .
[205] Anthony Atala,et al. Evaluation of hydrogels for bio-printing applications. , 2013, Journal of biomedical materials research. Part A.
[206] U. Demirci,et al. Bioprinting for stem cell research. , 2013, Trends in biotechnology.
[207] Rúben Pereira,et al. Development of novel alginate based hydrogel films for wound healing applications. , 2013, International journal of biological macromolecules.
[208] A. Mamalis,et al. Optical coherence tomography (OCT) of collagen in normal skin and skin fibrosis , 2013, Archives of Dermatological Research.
[209] Birgit Glasmacher,et al. Laser printing of stem cells for biofabrication of scaffold-free autologous grafts. , 2011, Tissue engineering. Part C, Methods.
[210] Shingo Nakamura,et al. Hydrogel blends of chitin/chitosan, fucoidan and alginate as healing-impaired wound dressings. , 2010, Biomaterials.
[211] Tao Xu,et al. Inkjet-mediated gene transfection into living cells combined with targeted delivery. , 2009, Tissue engineering. Part A.
[212] B. Derby,et al. Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing. , 2008, Biomaterials.
[213] T. Boland,et al. Inkjet printing of viable mammalian cells. , 2005, Biomaterials.