The role of Nd on the microstructural evolution and compressive behavior of Ti–Si alloys

Abstract The rare earth (RE) added Ti–Si alloys are potential candidates for lightweight structural materials, especially in high-temperature fields, but up to now related fundamental information is still rare. In this work, samples of Ti–8Si–5Nd, Ti–13Si–5Nd, and Ti–20Si–5Nd are designed to investigate the effect of RE element Nd on the microstructural evolution and compressive properties of the Ti–Si alloys. Experimental results indicate that all the samples are composed of α-Ti, β-Ti, Nd and Ti5Si3 phases according to the XRD patterns. The Ti–8Si–5Nd alloy shows a typical hypoeutectic structure with primarily precipitated bulky Ti5Si3 and Nd. Ti–13Si–5Nd alloy has lamellar eutectic structure and the Ti–20Si–5Nd alloy exhibits a coarsened homogeneous primary Nd, Ti5Si3 precipitation and microcrystalline eutectic structure. The added Nd and primarily-precipitated Nd5Si3 particles work as inoculants and refine the grain size of Ti5Si3, because of their similar hexagonal structure, atomic bond and atomic distribution of the outer crystal surface. The refined grain size and homogeneous distribution of Ti5Si3 phases in the Nd added Ti–Si alloys (especially the hypoeutectic alloy) are effective to improve the mechanical properties. The Ti–8Si–5Nd alloy exhibits the best plasticity (14.545%) and compressive strength (1191 MPa) among the three samples and shows good potential for structural materials.

[1]  Yong Du,et al.  The isothermal section of the Gd–Ti–Si ternary system at 773 K , 2009 .

[2]  Yong Du,et al.  The isothermal section of the Pr–Ti–Si ternary system at 773 K , 2009 .

[3]  Xing-Qiu Chen,et al.  Miedema’s model revisited: The parameter ϕ∗ for Ti, Zr, and Hf , 2006 .

[4]  V. Saltykov,et al.  Influence of tin on the structure and properties of as-cast Ti-rich Ti–Si alloys , 2003 .

[5]  Huang,et al.  Effect of Rare Earth Sc Addition on Microstructure and Mechanical Properties of an Al-Cu-Mg-Ag Alloy , 2003 .

[6]  Yong Du,et al.  Evolution of the microstructure and hardness of the Ti–Si alloys during high temperature heat-treatment , 2009 .

[7]  K. S. Bartwal,et al.  Effect on structure and hydrogen storage characteristics of composite alloys Ti0.32Cr0.43V0.25 with LaNi5 and rare-earth elements La, Ce, Y , 2009 .

[8]  Y. Zhan,et al.  Microstructural characteristics and elevated temperature wear of Ti-11Si-16Al alloy , 2008 .

[9]  Y. Zhan,et al.  Microstructure and compressive properties of in situ synthesized Nd2O3/Ti–6Si (wt.%) alloy composites , 2009 .

[10]  Y. Zhan,et al.  Microstructure and compressive properties of in situ synthesized Ti–Si alloy composites reinforced with La2O3 particles , 2009 .

[11]  Zushu Hu,et al.  Ti–Cu–Ni alloys with high strength and good plasticity , 2008 .

[12]  Y. F. Xu,et al.  Effect of Al on oxidation behaviour of Ti–Si eutectic alloys , 2007 .

[13]  Weitao Li,et al.  Ti-Si compounds formation by high-current ion implantation , 2002 .

[14]  I. Barin.  Thermochemical data of pure substances , 1989 .

[15]  Yong Du,et al.  The phase equilibria of the La-Ti-Si ternary system at 773 K , 2009 .

[16]  Y. Zhan,et al.  Microstructure and tribological behavior of Ti–Si eutectic alloys with Al addition , 2007 .

[17]  R. Mahmudi,et al.  Effects of rare-earth elements and Ca additions on the microstructure and mechanical properties of AZ31 magnesium alloy processed by ECAP , 2009 .