Introducing waste glass powder as a sustainable constituent in microsurfacing

[1]  A. Ghodrati,et al.  Study on Mode I, Mode II and Mixed Mode I/II Fracture Behavior of Hot Mix Asphalt Containing Silane Crosslinkable Polyethylene Waste , 2023, Theoretical and Applied Fracture Mechanics.

[2]  A. Izadi,et al.  Performance and environmental assessment of microsurfacing mixture using the granulated Blast-Furnace Slag Powder (GBSP) as potential recycled filler , 2022, Construction and Building Materials.

[3]  H. Ziari,et al.  Substitution of the natural aggregate filler by coal waste powder (CWP) in microsurfacing surface treatment: Mix design and performance evaluation , 2022, Construction and Building Materials.

[4]  M. M. Mohd Hasan,et al.  Performance of glass powder as bitumen modifier in hot mix asphalt , 2022, Physics and Chemistry of the Earth, Parts A/B/C.

[5]  Taha A. El-Sayed,et al.  The Novelty of Using Glass Powder and Lime Powder for Producing UHPSCC , 2022, Buildings.

[6]  Seyed Sina Sharifi,et al.  Characterization of contaminant leaching from asphalt pavements: A critical review of measurement methods, reclaimed asphalt pavement, porous asphalt, and waste-modified asphalt mixtures. , 2022, Water research.

[7]  A. Modarres,et al.  Microstructural Properties of Polymer-Modified Bitumen Emulsion-Cement Composites Considering the Production Method , 2022, Journal of Materials in Civil Engineering.

[8]  Youcai Zhao,et al.  Toward smarter management and recovery of municipal solid waste: A critical review on deep learning approaches , 2022, Journal of Cleaner Production.

[9]  Y. Muhammad,et al.  Study on the performance and sustainability of modified waste crumb rubber and steel slag powder/SBS composite modified asphalt mastic , 2022, Journal of Cleaner Production.

[10]  Qinghua Zhang,et al.  Identification of emerging organic pollutants from solid waste incinerations by FT-ICR-MS and GC/Q-TOF-MS and their potential toxicities. , 2022, Journal of hazardous materials.

[11]  Manish Pal,et al.  Utilization of fly ash and glass powder as fillers in steel slag asphalt mixtures , 2021 .

[12]  Yazhou Wang,et al.  A review on the incorporation and potential mechanism of heavy metals on the recovered struvite from wastewater. , 2021, Water research.

[13]  A. Modarres,et al.  Effect of polymer modified bitumen emulsion production method on the durability of recycled asphalt mixture in the presence of deicing agents , 2021, Construction and Building Materials.

[14]  B. Kumar,et al.  Utilization of Waste Glass Powder and Glass Composite Fillers in Asphalt Pavements , 2021, Advances in Civil Engineering.

[15]  M. J. Brennan,et al.  Experimental investigation of optimum adhesion properties for anionic emulsions in road maintenance applications , 2021, Construction and Building Materials.

[16]  Haidong Wu,et al.  Recycling of waste glass as raw materials for the preparation of self-cleaning, light-weight and high-strength porous ceramics , 2021 .

[17]  Haiying Yu,et al.  The role of polysaccharides functional groups in cadmium binding in root cell wall of a cadmium-safe rice line. , 2021, Ecotoxicology and environmental safety.

[18]  Elvira Vassilieva,et al.  Environmental and human health risk assessment of sulfidic mine waste: Bioaccessibility, leaching and mineralogy. , 2021, Journal of hazardous materials.

[19]  Zhanping You,et al.  Waste cathode-ray-tube glass powder modified asphalt materials: Preparation and characterization , 2021 .

[20]  S. S. Chopra,et al.  Emerging waste valorisation techniques to moderate the hazardous impacts, and their path towards sustainability. , 2021, Journal of hazardous materials.

[21]  Zhenming Xu,et al.  An ignored potential microplastic contamination of a typical waste glass recycling base. , 2021, Journal of hazardous materials.

[22]  M. Aghbashlo,et al.  Mapping healthcare waste management research: Past evolution, current challenges, and future perspectives towards a circular economy transition. , 2021, Journal of hazardous materials.

[23]  Shaopeng Wu,et al.  Hazardous characteristics and variation in internal structure by hydrodynamic damage of BOF slag-based thin asphalt overlay. , 2021, Journal of hazardous materials.

[24]  F. Alexis,et al.  Heavy metal water pollution: A fresh look about hazards, novel and conventional remediation methods , 2021 .

[25]  Zhongren Wang,et al.  Pavement maintenance and rehabilitation practices in California: A study of 35-year as-built data in PaveM , 2021 .

[26]  Zhenming Xu,et al.  Analysis of contaminants and their formation mechanism in the desiccation-dissociation process of organic impurity of waste glass. , 2021, Journal of hazardous materials.

[27]  Freddy Richard Apaza Apaza,et al.  Evaluation of the performance of iron ore waste as potential recycled aggregate for micro-surfacing type cold asphalt mixtures , 2021 .

[28]  Zhanping You,et al.  Leaching evaluation and performance assessments of asphalt mixtures with recycled cathode ray tube glass: A preliminary study , 2021 .

[29]  Jiu-peng Zhang,et al.  Design and evaluation of high–luminance porous asphalt mixtures based on wasted glass for sponge city , 2020 .

[30]  Nishant Bhargava,et al.  State of the art review on design and performance of microsurfacing , 2020, Road Materials and Pavement Design.

[31]  H. Ziari,et al.  Mix design and performance evaluation of microsurfacing containing electric arc furnace (EAF) steel slag filler , 2020 .

[32]  Hani Nassif,et al.  New perspectives on recycling waste glass in manufacturing concrete for sustainable civil infrastructure , 2020 .

[33]  S. Nanda,et al.  Municipal solid waste management and landfilling technologies: a review , 2020, Environmental Chemistry Letters.

[34]  E. Hesami,et al.  Performance evaluation of microsurfacing with rubber powder , 2020, Journal of Thermoplastic Composite Materials.

[35]  Shaopeng Wu,et al.  Enhancement mechanism of skid resistance in preventive maintenance of asphalt pavement by steel slag based on micro-surfacing , 2020 .

[36]  E. Hesami,et al.  Effect of steel slag aggregate and bitumen emulsion types on the performance of microsurfacing mixture , 2020 .

[37]  P. Sarker,et al.  Reuse of waste glass as a supplementary binder and aggregate for sustainable cement-based construction materials: A review , 2020 .

[38]  K. Zhong,et al.  Rapid determination of styrene-butadiene-styrene (SBS) content in modified asphalt based on Fourier transform infrared (FTIR) spectrometer and linear regression analysis , 2020 .

[39]  Stacey M. Louie,et al.  Preventing Assembly and Crystallization of Alkane Acids at the Silica–Bitumen Interface To Enhance Interfacial Resistance to Moisture Damage , 2019, Industrial & Engineering Chemistry Research.

[40]  Wei Li,et al.  Performance evaluation of new waterborne epoxy resin modified emulsified asphalt micro-surfacing , 2019, Construction and Building Materials.

[41]  H. Yaacob,et al.  Performance evaluation of asphalt micro surfacing – a review , 2019, IOP Conference Series: Materials Science and Engineering.

[42]  E. Fini,et al.  Active Mineral Fillers Arrest Migrations of Alkane Acids to the Interface of Bitumen and Siliceous Surfaces , 2019, ACS Sustainable Chemistry & Engineering.

[43]  Yi-Pin Lin,et al.  Evaluation of heavy metal leachability of incinerating recycled aggregate and solidification/stabilization products for construction reuse using TCLP, multi-final pH and EDTA-mediated TCLP leaching tests. , 2019, Journal of hazardous materials.

[44]  E. Prasad,et al.  Transitions in unmodified and modified bitumen using FTIR spectroscopy , 2019, Materials and Structures.

[45]  Eugenio Pellicer,et al.  Towards a sustainable optimization of pavement maintenance programs under budgetary restrictions , 2017 .

[46]  A. Poulesquen,et al.  Influence of Thermomechanical History on Chemical and Rheological Behavior of Bitumen , 2011 .

[47]  P. J. Oliveira,et al.  THE USE OF STYRENE-BUTADIENE RUBBER WASTE AS A POTENTIAL FILLER IN NITRILE RUBBER: ORDER OF ADDITION AND SIZE OF WASTE PARTICLES , 2009 .

[48]  Virginie Mouillet,et al.  Ageing by UV radiation of an elastomer modified bitumen , 2008 .

[49]  Robert Karlsson,et al.  Application of FTIR-ATR to Characterization of Bitumen Rejuvenator Diffusion , 2003 .