High damage threshold Al2O3SiO2 dielectric coatings for excimer lasers

Today there are hardly any products in optical industry which do not employ optical coatings. Mainly in the UV spectral region, laser induced damage thresholds of these coatings are a limiting factor for the development of cost-effective optics. The high power optical components and dielectric coatings have to be developed to cavity optics, beam relay optics, mask imaging optics, and masks. Therefore, we used ultralow loss conventional electron-beam evaporation for Al2O3SiO2 dielectric multilayers. Based on a fundamental coating technique, both multilayer mean background absorption and absorption at localized spikes have been reduced drastically. The resulting KrF laser damage threshold of HR coatings is 16 J cm−2 (1-on-1, 30 ns MSC). Multilayers have been characterized by atomic force microscopy, photothermal microscopy, absorption measurements, and spectroscopy of sputtered neutrals.

[1]  Johanes Ebert,et al.  Laser-induced damage thresholds and optical constants of ion-plated and ion-beam-sputtered Al2O3 and HfO2 coatings for the ultraviolet , 1990, Other Conferences.

[2]  Norbert Kaiser,et al.  Structure of thin fluoride films deposited on amorphous substrates , 1992 .

[3]  Klaus R. Mann,et al.  Monitoring and shaping of excimer laser beam profiles , 1993, Other Conferences.

[4]  Randall T. Swimm.  Thermal Transport Properties of Optical Thin Films , 1991 .

[5]  Gary E. Loomis,et al.  Electrostatic reduction of particulates for laser resistant hafnia coatings , 1994, Laser Damage.

[6]  N. Kaiser,et al.  Graded reflectance mirror design with unconventional profile for excimer laser , 1994 .

[7]  R. Mattheis,et al.  UV losses in MgF2 thin films induced by the evaporation boat , 1987 .

[8]  Harald Schink,et al.  Laser induced damage thresholds of dielectric coatings at 193 nm and correlations to optical constants and process parameters , 1990 .

[9]  Norbert Kaiser,et al.  Evaluation of thin MgF2 films by spectroscopic ellipsometry , 1993 .

[10]  Ursula J. Gibson,et al.  Ion Beam Processing of Optical Thin Films , 1989 .

[11]  Arthur H. Guenther,et al.  The role of thermal conductivity in the pulsed laser damage sensitivity of optical thin films , 1988 .

[12]  Michael R. Lange,et al.  Pulsed laser damage in thin film coatings: Fluorides and oxides , 1985 .

[13]  L. Raupach,et al.  Investigation of thin fluoride films for optical applications by surface analytical methods and electron microscopy , 1993 .

[14]  Hans Lauth,et al.  Structural influences on the laser damage thresholds of oxide coatings , 1993, Optical Systems Design.

[15]  S D Jacobs,et al.  Model for laser damage dependence on thin-film morphology. , 1993, Applied optics.

[16]  Klaus R. Mann,et al.  Damage testing of optical components for high-power excimer lasers , 1991 .

[17]  Ronald D. Goodman,et al.  Coatings on glass , 1984 .

[18]  A. Endo,et al.  Laser-induced damage threshold and absorption measurements in rare-gas-halide excimer laser components , 1989 .

[19]  Norbert Kaiser,et al.  Photothermal microscopy of defects and laser damage morphology in Al2O3/SiO2 dielectric mirror coatings for 248 nm , 1994, Laser Damage.

[20]  Michael Reichling,et al.  Micrometer Resolved Photothermal Displacement Inspection of Optical Coatings , 1993 .

[21]  Robertson,et al.  Electronic and atomic structure of amorphous carbon. , 1987, Physical review. B, Condensed matter.

[22]  Mark R. Kozlowski,et al.  Role of defects in laser damage of multilayer coatings , 1993, Laser Damage.

[23]  John C. Lambropoulos,et al.  Thermal conductivity of dielectric thin films , 1989 .

[24]  K Mann,et al.  Automated Damage Testing Facility for Excimer Laser Optics , 1990 .