A simplified dynamic model of building structures integrated with shaped-stabilized phase change materials

The use of phase change materials (PCM) to enhance the building energy performance has attracted increasing attention of researchers and practitioners over the last few years. Thermodynamic models of building structures using PCMs are essential for analyzing their impacts on building energy performance at different conditions and using different control strategies. There are few PCM models of detailed physics providing good accuracy in simulating thermodynamic behavior of building structures integrated with PCM layers. However, simplified models with acceptable accuracy and good reliability are preferable in many practical applications concerning computation speed and program size particularly when involving large buildings or models are used for online applications. A simplified physical dynamic model of building structures integrated with SSPCM (shaped-stabilized phase change material) is developed and validated in this study. The simplified physical model represents the wall by 3 resistances and 2 capacitances and the PCM layer by 4 resistances and 2 capacitances respectively while the key issue is the parameter identification of the model. The parameters of the simplified model are identified using genetic algorithm (GA) on the basis of the basic physical properties of the wall and PCM layer. Two GA-based preprocessors are developed to identify the optimal parameters (resistances and capacitances) of the model by frequency-domain regression and time-domain regression respectively. Validation results show that the simplified model can represent light walls and median walls integrated with SSPCM with good accuracy.

[1]  Joseph Andrew Clarke,et al.  Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r , 2004 .

[2]  Min Xiao,et al.  Thermal performance of a high conductive shape-stabilized thermal storage material , 2001 .

[3]  Kunping Lin,et al.  Thermal analysis of a direct-gain room with shape-stabilized PCM plates , 2008 .

[4]  Yi Jiang,et al.  Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings , 2006 .

[5]  Sunil Kumar Singal,et al.  Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .

[6]  John Mitchell,et al.  Transfer Functions for Efficient Calculation of Multidimensional Transient Heat Transfer , 1989 .

[7]  Min Xiao,et al.  Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity , 2002 .

[8]  Robert F. Boehm,et al.  Modeling of phase change material peak load shifting , 2007 .

[9]  H. Inaba,et al.  Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material , 1997 .

[10]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .

[11]  Yingxin Zhu,et al.  A General Model for Analyzing the Thermal Performance of the Heat Charging and Discharging Processes of Latent Heat Thermal Energy Storage Systems , 2001 .

[12]  Wasim Saman,et al.  Analysis and modelling of a phase change storage system for air conditioning applications , 2001 .

[13]  Zhiwei Lian,et al.  Hourly cooling load prediction by a combined forecasting model based on Analytic Hierarchy Process , 2004 .

[14]  Melanie Mitchell,et al.  An introduction to genetic algorithms , 1996 .

[15]  Shengwei Wang,et al.  Simplified building model for transient thermal performance estimation using GA-based parameter identification , 2006 .

[16]  Yi Jiang,et al.  Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard , 2008 .

[17]  Gregor P. Henze,et al.  Evaluation of optimal control for active and passive building thermal storage , 2004 .

[18]  James E. Braun,et al.  An Inverse Gray-Box Model for Transient Building Load Prediction , 2002 .

[19]  Youming Chen,et al.  A novel and simple building load calculation model for building and system dynamic simulation , 2001 .

[20]  Ye Hong,et al.  Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material , 2000 .

[21]  Xin Wang,et al.  Numerical analysis of effect of shape-stabilized phase change material plates in a building combined with night ventilation , 2009 .

[22]  James E. Braun,et al.  Evaluating the Performance of Building Thermal Mass Control Strategies , 2001 .