A Novel Closed-Loop Time-Delayed Filter for Unstable System

Aiming to improve the stability dynamic performance of the oscillating system, an internal closed-loop time-delayed filter with negative pulse is designed. To make the unstable system into stable, a reasonable time delay is introduced within the feedback control system, based on optimization theory to design the delay filter parameters. Matlab/SIMULINK simulation software is used on system performance analysis. Simulation results show that the designed internal closed-loop time-delayed filter can effectively improve the system stability, but also inhibit the high-frequency noise, with a strong anti-interference ability.

[1]  Di Yang,et al.  Flexible satellite attitude maneuver control using pulse-width pulse-frequency modulated input shaper , 2006, 2006 1st International Symposium on Systems and Control in Aerospace and Astronautics.

[2]  Rush D. Robinett,et al.  Command shaping and closed-loop control interactions for a ship crane , 2002, Proceedings of the 2002 American Control Conference (IEEE Cat. No.CH37301).

[3]  Chu Zhongyi.  Vibration control in a dual-drive planar parallel robot , 2006 .

[4]  Warren P. Seering,et al.  Input shaped control of a planar gantry crane with hoisting , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[5]  T. Singh,et al.  Design of closed-loop input shaping controllers , 2003, Proceedings of the 2003 American Control Conference, 2003..

[6]  William Singhose,et al.  Effects of hoisting on the input shaping control of gantry cranes , 2000 .