Improving the efficiency of a poly(3-hexylthiophene)-CuInS2 photovoltaic device by incorporating graphene nanopowder

Abstract. In the present work, the effect of incorporation of graphene on the poly(3-hexylthiophene) (P3HT):CuInS2 quantum dot (CIS QD)-based solar cell has been studied. For this purpose, the concentration of graphene is varied from 0 to 0.01% w/w in P3HT–CIS (1:0.5) film. It is found that graphene does not deteriorate the absorption of the composite film. It assists in dissociating the photogenerated excitons (both in P3HT and QDs) owing to its two-dimensional structure and high electron affinity as is evident by photoluminescence (PL) quenching. At 0.01% w/w concentration of graphene about ∼95% of PL is quenched. The electrical characteristics show that the incorporation of graphene enhances the efficiency of the device by establishing interconnected conducting pathways in the volume of polymer matrix. The maximum efficiency is observed to be 1.5% at 0.005% w/w content of graphene. However, at higher concentration, i.e., 0.01% w/w, the device starts deteriorating.

[1]  Markus Hösel,et al.  Solar cells with one-day energy payback for the factories of the future , 2012 .

[2]  V. Klimov,et al.  Efficient synthesis of highly luminescent copper indium sulfide-based core/shell nanocrystals with surprisingly long-lived emission. , 2011, Journal of the American Chemical Society.

[3]  Frederik C. Krebs,et al.  The OE-A OPV demonstrator anno domini 2011 , 2011 .

[4]  K. Müllen,et al.  Graphene as Transparent Electrode Material for Organic Electronics , 2011, Advanced materials.

[5]  G. Pan,et al.  Polymer Photovoltaic Cells Based on Solution‐Processable Graphene and P3HT , 2009 .

[6]  Ashutosh Kumar Singh,et al.  Polymeric stabilization of hybrid nanocomposites: a comparison between in situ and ex situ-grown CuInS2 in poly(3-hexylthiophene) polymer , 2013, Colloid and Polymer Science.

[7]  J. Fréchet,et al.  Polymer-fullerene composite solar cells. , 2008, Angewandte Chemie.

[8]  Klaus Meerholz,et al.  Controlling Morphology in Polymer–Fullerene Mixtures , 2008 .

[9]  Promod K. Bhatnagar,et al.  Bulk heterojunction formation with induced concentration gradient from a bilayer structure of P3HT:CdSe/ZnS quantum dots using inter-diffusion process for developing high efficiency solar cell , 2012 .

[10]  Dawei He,et al.  Solution-processable functionalized graphene in donor/acceptor-type organic photovoltaic cells , 2010 .

[11]  Jin Zhai,et al.  Two-dimensional graphene bridges enhanced photoinduced charge transport in dye-sensitized solar cells. , 2010, ACS nano.

[12]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[13]  V. Kuppa,et al.  Enhancement in the performance of organic photovoltaic devices with pristine graphene , 2013 .

[14]  F. Guinea,et al.  The electronic properties of graphene , 2007, Reviews of Modern Physics.

[15]  Ashraf Uddin,et al.  RETRACTED: Effect of thermal annealing on P3HT:PCBM bulk-heterojunction organic solar cells: A critical review , 2014 .

[16]  Fan Wu,et al.  CuInS2 quantum dots synthesized by a solvothermal route and their application as effective electron acceptors for hybrid solar cells , 2010 .

[17]  C. S. Bhatia,et al.  Effect of thermal annealing on the efficiency of poly (3-hexylthiphone):[6,6]-phenyl-C 61 -butyric acid methyl ester bulk heterojunction solar cells , 2011 .

[18]  Jarvist M. Frost,et al.  Binary Organic Photovoltaic Blends: A Simple Rationale for Optimum Compositions , 2008 .

[19]  Wilhelm Graupner,et al.  Creation of a gradient polymer-fullerene interface in photovoltaic devices by thermally controlled interdiffusion , 2002 .

[20]  N. S. Sariciftci,et al.  Core/shell nanomaterials in photovoltaics , 2003 .

[21]  C. S. Bhatia,et al.  The effect of length of single-walled carbon nanotubes (SWNTs) on electrical properties of conducting polymer–SWNT composites , 2009 .

[22]  G. Urban,et al.  Improved efficiency of hybrid solar cells based on non-ligand-exchanged CdSe quantum dots and poly(3-hexylthiophene) , 2010 .

[23]  J. Parisi,et al.  Charge transfer in blends of P3HT and colloidally prepared CuInS2 nanocrystals , 2011 .

[24]  Dieter Meissner,et al.  Hybrid Solar Cells Based on Nanoparticles of CuInS2 in Organic Matrices , 2003 .

[25]  A. Rinzler,et al.  Electronic structure of atomically resolved carbon nanotubes , 1998, Nature.

[26]  E. Williams,et al.  Polymeric semiconductor/graphene hybrid field-effect transistors , 2011 .

[27]  U. Kortshagen,et al.  Hybrid solar cells from P3HT and silicon nanocrystals. , 2009, Nano letters.

[28]  Sang‐Woo Kim,et al.  Graphene surface induced specific self-assembly of poly(3-hexylthiophene) for nanohybrid optoelectronics: from first-principles calculation to experimental characterizations† , 2013 .

[29]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[30]  Chongwu Zhou,et al.  Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics. , 2010, ACS nano.

[31]  Inderpreet Kaur,et al.  Optical and electrical characterization of conducting polymer-single walled carbon nanotube composite films , 2008 .

[32]  A Paul Alivisatos,et al.  Employing end-functional polythiophene to control the morphology of nanocrystal-polymer composites in hybrid solar cells. , 2004, Journal of the American Chemical Society.

[33]  Ullrich Scherf,et al.  Efficiency enhancement for bulk-heterojunction hybrid solar cells based on acid treated CdSe quantum dots and low bandgap polymer PCPDTBT , 2011 .

[34]  Amandeep Kaur,et al.  Enhancement of efficiency of a conducting polymer P3HT:CdSe/ZnS quantum dots hybrid solar cell by adding single walled carbon nanotube for transporting photogenerated electrons , 2013 .

[35]  Yunfei Zhou,et al.  Bulk-heterojunction hybrid solar cells based on colloidal nanocrystals and conjugated polymers , 2010 .

[36]  Markus Hösel,et al.  Roll-to-roll fabrication of polymer solar cells , 2012 .

[37]  F. Krebs,et al.  Low band gap polymers for organic photovoltaics , 2007 .

[38]  E. Palomares,et al.  Improving CdSe Quantum Dot/Polymer Solar Cell Efficiency Through the Covalent Functionalization of Quantum Dots: Implications in the Device Recombination Kinetics , 2013 .

[39]  Kwang S. Kim,et al.  Roll-to-roll production of 30-inch graphene films for transparent electrodes. , 2010, Nature nanotechnology.