Tailoring hydrophilic and porous nature of polysiloxane derived ceramer and ceramic membranes for enhanced bioelectricity generation in microbial fuel cell

[1]  T. Gu,et al.  Microbial fuel cell hybrid systems for wastewater treatment and bioenergy production: Synergistic effects, mechanisms and challenges , 2019, Renewable and Sustainable Energy Reviews.

[2]  Cheng Peng,et al.  Preparation of ZrO2 fiber modified Al2O3 membrane supports with enhanced strength and permeability , 2019, Journal of the European Ceramic Society.

[3]  K. Rezwan,et al.  Porous polymer derived ceramic (PDC)-montmorillonite-H3PMo12O40/SiO2 composite membranes for microbial fuel cell (MFC) application , 2018, Ceramics International.

[4]  R. Machado,et al.  Polymer-Derived Ceramics with engineered mesoporosity: From design to application in catalysis , 2018, Surface and Coatings Technology.

[5]  D. Mohebbi-Kalhori,et al.  Application of layer-by-layer assembled chitosan/montmorillonite nanocomposite as oxygen barrier film over the ceramic separator of the microbial fuel cell , 2018, Electrochimica Acta.

[6]  D. Bose,et al.  Sustainable power generation from wastewater sources using Microbial Fuel Cell , 2018 .

[7]  K. Lu,et al.  Effect of additive structure and size on SiO 2 formation in polymer‐derived Si OC ceramics , 2018, Journal of the American Ceramic Society.

[8]  M. Ghangrekar,et al.  Enhancement of bioelectricity generation and algal productivity in microbial carbon-capture cell using low cost coconut shell as membrane separator , 2018 .

[9]  Shaoqin Liu,et al.  FeS2 Nanoparticles Decorated Graphene as Microbial‐Fuel‐Cell Anode Achieving High Power Density , 2018, Advanced materials.

[10]  M. Ghangrekar,et al.  Bismuth doped TiO2 as an excellent photocathode catalyst to enhance the performance of microbial fuel cell , 2018 .

[11]  S. A. Yuksel,et al.  Elucidation of the pore size and temperature dependence of the oxygen diffusion into porous silicon , 2017 .

[12]  G. Bruni,et al.  Novel composite polybenzimidazole-based proton exchange membranes as efficient and sustainable separators for microbial fuel cells , 2017 .

[13]  F. Hernández‐Fernández,et al.  Air breathing cathode-microbial fuel cell with separator based on ionic liquid applied to slaughterhouse wastewater treatment and bio-energy production , 2017 .

[14]  H. Poggi‐Varaldo,et al.  Comparison of alternative membranes to replace high cost Nafion ones in microbial fuel cells , 2016 .

[15]  D. Jiang,et al.  Proton conduction in crystalline and porous covalent organic frameworks. , 2016, Nature materials.

[16]  A. Chiolerio,et al.  Surface modification of commercial carbon felt used as anode for Microbial Fuel Cells. , 2016 .

[17]  H. Onggo,et al.  Effect of various concentration of sulfuric acid for Nafion membrane activation on the performance of fuel cell , 2016 .

[18]  I. Ieropoulos,et al.  Comprehensive Study on Ceramic Membranes for Low‐Cost Microbial Fuel Cells , 2015, ChemSusChem.

[19]  M. Ghangrekar,et al.  Development of low cost ceramic separator using mineral cation exchanger to enhance performance of microbial fuel cells , 2015 .

[20]  M. Ghasemi,et al.  A review on the role of proton exchange membrane on the performance of microbial fuel cell , 2014 .

[21]  Shuiliang Chen,et al.  Abiotic Oxygen Reduction Reaction Catalysts Used in Microbial Fuel Cells , 2014 .

[22]  K. Rezwan,et al.  Tailoring surfaces of hybrid ceramics for gas adsorption – From alkanes to CO2 , 2014 .

[23]  Zhen He,et al.  Recovery of Electrical Energy in Microbial Fuel Cells , 2014 .

[24]  C. A. Ferreira,et al.  Measuring the proton conductivity of ion-exchange membranes using electrochemical impedance spectroscopy and through-plane cell. , 2014, The journal of physical chemistry. B.

[25]  L. D. Chambers,et al.  Comparing the short and long term stability of biodegradable, ceramic and cation exchange membranes in microbial fuel cells. , 2013, Bioresource technology.

[26]  Soumya Pandit,et al.  Graphene Oxide-Impregnated PVA–STA Composite Polymer Electrolyte Membrane Separator for Power Generation in a Single-Chambered Microbial Fuel Cell , 2013 .

[27]  A. Gurlo,et al.  Thermal decomposition of carbon-rich polymer-derived silicon carbonitrides leading to ceramics with high specific surface area and tunable micro- and mesoporosity , 2012 .

[28]  Ming-hua Zhou,et al.  An overview of electrode materials in microbial fuel cells , 2011 .

[29]  Yonghee Lee,et al.  Interface resistances of anion exchange membranes in microbial fuel cells with low ionic strength. , 2011, Biosensors & bioelectronics.

[30]  Paolo Colombo,et al.  Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics , 2010 .

[31]  M. Behera,et al.  Performance comparison of up-flow microbial fuel cells fabricated using proton exchange membrane and earthen cylinder , 2010 .

[32]  Xia Huang,et al.  The use of nylon and glass fiber filter separators with different pore sizes in air-cathode single-chamber microbial fuel cells , 2010 .

[33]  J. Atwater,et al.  Oxygen permeation through functionalized hydrophobic tubular ceramic membranes , 2007 .

[34]  P. Gómez‐Romero,et al.  Hybrid proton-conducting membranes for polymer electrolyte fuel cells Phosphomolybdic acid doped poly(2,5-benzimidazole)-(ABPBI-H3PMo12O40) , 2005 .

[35]  Keith Scott,et al.  Electricity generation from cysteine in a microbial fuel cell. , 2005, Water research.

[36]  M. Nogami,et al.  Pore size effect on proton transfer in sol-gel porous silica glasses , 2004 .

[37]  C. Thurston,et al.  Microbial fuel-cells , 1993 .

[38]  L. Fan.  Effect of Heteropolyacid and Heteropolyacid Salt on the Performance of Nanometer Proton Membrane Microbial Fuel Cell , 2017 .

[39]  Han-Qing Yu,et al.  Recent advances in the separators for microbial fuel cells. , 2011, Bioresource technology.

[40]  L. Gubler,et al.  Trends for fuel cell membrane development , 2010 .

[41]  M. Ghangrekar,et al.  Performance of microbial fuel cell subjected to variation in pH, temperature, external load and substrate concentration. , 2009, Bioresource technology.

[42]  P. Colombo.  Engineering porosity in polymer-derived ceramics , 2008 .

[43]  Shaomin Liu,et al.  Preparation of porous aluminium oxide (Al2O3) hollow fibre membranes by a combined phase-inversion and sintering method , 2003 .

[44]  A. E. Greenberg,et al.  Standard methods for the examination of water and wastewater : supplement to the sixteenth edition , 1988 .