Aeroelastic wing section control via relaxed tensor product model transformation framework

A study was conducted to demonstrate aeroelastic wing section control via relaxed tensor product model transformation framework. The investigations focused on the three-degree-of-freedom (3-DOF) nonlinear aeroelastic test apparatus (NATA) model. The study also revisited the parallel distributed compensation (PDC) framework-based control solution of the 3-DOF NATA model in the case where the model was extended to incorporate friction. It presented a new general theoretical control design framework based on tensor product (TP) model transformation. The proposed framework was capable of a significant complexity reduction of quasi-linear parameter-varying (QLPV) models, including numerical and theoretical for linear matrix inequality (LMI)-based control design. The proposed control design framework was applied for active stabilization of the 3-DOF aeroelastic wing section as an extension of the design method.

[1]  Antonio Sala,et al.  Relaxed LMI conditions for closed-loop fuzzy systems with tensor-product structure , 2007, Eng. Appl. Artif. Intell..

[2]  George Platanitis,et al.  Suppression of Control Reversal Using Leading- and Trailing-Edge Control Surfaces , 2005 .

[3]  Peter Korondi,et al.  Convex hull manipulation based control performance optimisation , 2010 .

[4]  Jian Chen,et al.  Multi-Input/Multi-Output Adaptive Output Feedback Control Design for Aeroelastic Vibration Suppression , 2007 .

[5]  Peter Baranyi,et al.  Tensor-product model-based control of two-dimensional aeroelastic system , 2006 .

[6]  Vivek Mukhopadhyay,et al.  Historical Perspective on Analysis and Control of Aeroelastic Responses , 2003 .

[7]  Thomas W. Strganac,et al.  Applied Active Control for a Nonlinear Aeroelastic Structure , 1998 .

[8]  Péter Várlaki,et al.  HOSVD Based Canonical Form for Polytopic Models of Dynamic Systems , 2009, J. Adv. Comput. Intell. Intell. Informatics.

[9]  P. Baranyi,et al.  Computational relaxed TP model transformation: restricting the computation to subspaces of the dynamic model , 2009 .

[10]  Ben S. Cazzolato,et al.  Linear-Parameter-Varying Control of an Improved Three-Degree-of-Freedom Aeroelastic Model , 2010 .

[11]  Kazuo Tanaka,et al.  LMI Control Performance Conditions and Designs , 2002 .

[12]  Heather Gilliatt,et al.  Active control of an aeroelastic structure , 1997 .

[13]  Péter Várlaki.  TP Model Transformation , 2013 .

[14]  Andrew J. Kurdila,et al.  Identification and Control of Limit Cycle Oscillations in Aeroelastic Systems , 1999 .

[15]  Claudia-Adina Dragos,et al.  Novel Tensor Product Models for Automatic Transmission System Control , 2012, IEEE Systems Journal.

[16]  Yeung Yam,et al.  Definition of the HOSVD based canonical form of polytopic dynamic models , 2006, 2006 IEEE International Conference on Mechatronics.

[17]  Ben S. Cazzolato,et al.  A mixed H2/Hx scheduling control scheme for a two degree-of-freedom aeroelastic system under varying airspeed and gust conditions , 2008 .

[18]  Yeung Yam,et al.  Singular Value-Based Fuzzy Reduction With Relaxed Normality Condition , 2003 .

[19]  Peter Baranyi,et al.  Output feedback control of two-dimensional aeroelastic system , 2006 .

[20]  Fetah Kolonic,et al.  Tensor product based control of the Single Pendulum Gantry process with stable neural network based friction compensation , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[21]  Peter Baranyi,et al.  Tensor-Product-Model-Based Control of a Three Degrees-of-Freedom Aeroelastic Model , 2013 .

[22]  Vivek Mukhopadhyay,et al.  Transonic Flutter Suppression Control Law Design and Wind-Tunnel Test Results , 2000 .

[23]  Sahjendra N. Singh,et al.  Multi-Input Noncertainty-Equivalent Adaptive Control of an Aeroelastic System , 2010 .

[24]  Sahjendra N. Singh,et al.  Output Feedback Form and Adaptive Stabilization of a Nonlinear Aeroelastic System , 2002 .

[25]  Péter Baranyi,et al.  TP model transformation as a way to LMI-based controller design , 2004, IEEE Transactions on Industrial Electronics.