Diffraction Based Overlay (DBO) is widely evaluated by numerous authors, results show DBO can provide better performance than Imaging Based Overlay (IBO). However, DBO has its own problems. As well known, Modeling based DBO (mDBO) faces challenges of low measurement sensitivity and crosstalk between various structure parameters, which may result in poor accuracy and precision. Meanwhile, main obstacle encountered by empirical DBO (eDBO) is that a few pads must be employed to gain sufficient information on overlay-induced diffraction signature variations, which consumes more wafer space and costs more measuring time. Also, eDBO may suffer from mark profile asymmetry caused by processes. In this paper, we propose an alternative DBO technology that employs a dedicated overlay mark and takes a rigorous modeling approach. This technology needs only two or three pads for each direction, which is economic and time saving. While overlay measurement error induced by mark profile asymmetry being reduced, this technology is expected to be as accurate and precise as scatterometry technologies.
[1]
Jie Li,et al.
A comparison of advanced overlay technologies
,
2010,
Advanced Lithography.
[2]
Vladimir Levinski,et al.
Differential signal scatterometry overlay metrology: an accuracy investigation
,
2007,
SPIE Optical Metrology.
[3]
Anat Marchelli,et al.
Overlay control using scatterometry based metrology (SCOM) in production environment
,
2008,
SPIE Advanced Lithography.
[4]
Chan Hwang,et al.
A novel robust diffraction-based metrology concept for measurement and monitoring of critical layers in memory devices
,
2010,
Advanced Lithography.
[5]
Jacky Huang,et al.
Detection of lateral CD shift with scatterometry on grating structures in production layout
,
2010,
Advanced Lithography.