Modeling and Torque Tracking Control of Permanent Magnet Synchronous Motor (PMSM) for Hybrid Electric Vehicle

This paper presents a detailed derivation of a permanent magnet synchronous motor, which may be used as the electric power train for the simulation of a hybrid electric vehicle. A torque tracking control of the permanent magnet synchronous motor is developed by using an adaptive proportional-integral-derivative controller. Several tests such as step function, saw tooth function, sine wave function and square wave function were used in order to examine the performance of the proposed control structure. The effectiveness of the proposed controller was verified and compared with the same system under a PID controller and the desired control. The result of the observations shows that the proposed control structure proves to be effective in tracking the desired torque with a good response. The findings of this study will be considered in the design, optimisation and experimentation of series hybrid electric vehicle.

[1]  M. Mohammadian,et al.  A fuzzy-based supervisory robust control for parallel hybrid electric vehicles , 2005, 2005 IEEE Vehicle Power and Propulsion Conference.

[2]  George A. Rovithakis,et al.  An adaptive neuro-fuzzy tracking control for multi-input nonlinear dynamic systems , 2008, Autom..

[3]  Hao Wu,et al.  A four-step method to design an energy management strategy for hybrid vehicles , 2004, Proceedings of the 2004 American Control Conference.

[4]  Ettore Pennestrì,et al.  Efficiency Evaluation of Gearboxes for Parallel Hybrid Vehicles: Theory and Applications , 2012 .

[5]  N. Munro,et al.  PID controllers: recent tuning methods and design to specification , 2002 .

[6]  Chaoyong Li,et al.  Adaptive backstepping-based flight control system using integral filters , 2009 .

[7]  Bengt Lennartson,et al.  Robust and optimal tuning of PI and PID controllers , 2002 .

[8]  Morteza Montazeri-Gh,et al.  Application of genetic algorithm for optimization of control strategy in parallel hybrid electric vehicles , 2006, J. Frankl. Inst..

[9]  K.M. Kim,et al.  Development of the Power Generator for Series Hybrid Electric Vehicle , 2006, 2006 International Forum on Strategic Technology.

[10]  Oguz Ustun,et al.  A neuro-fuzzy controller for speed control of a permanent magnet synchronous motor drive , 2008, Expert Syst. Appl..

[11]  Sheldon S. Williamson,et al.  Comparative study of hybrid electric vehicle control strategies for improved drivetrain efficiency analysis , 2009, 2009 IEEE Electrical Power & Energy Conference (EPEC).

[12]  F. R. Salmasi,et al.  Control Strategies for Hybrid Electric Vehicles: Evolution, Classification, Comparison, and Future Trends , 2007, IEEE Transactions on Vehicular Technology.

[13]  Alessandro Astolfi,et al.  Nonlinear and adaptive control with applications , 2008 .

[14]  Omonowo D. Momoh,et al.  An overview of hybrid electric vehicle technology , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[15]  Jyh-Cheng Jeng,et al.  On-line adaptive tuning for PID controllers , 2002 .

[16]  Sergio Grammatico,et al.  A series-parallel hybrid electric powertrain for industrial vehicles , 2010, 2010 IEEE Vehicle Power and Propulsion Conference.

[17]  Ahmet Teke,et al.  A comprehensive overview of hybrid electric vehicle: Powertrain configurations, powertrain control techniques and electronic control units , 2011 .

[18]  Faa-Jeng Lin,et al.  Slider-crank mechanism control using adaptive computed torque technique , 1998 .

[19]  Khisbullah Hudha,et al.  Modelling, validation and adaptive pid control with pitch moment rejection of active suspension system for reducing unwanted vehicle motion in longitudinal direction , 2010 .

[20]  Oscar Castillo,et al.  Intelligent control of a stepping motor drive using an adaptive neuro-fuzzy inference system , 2005, Inf. Sci..

[21]  Murat Karabacak,et al.  Speed and current regulation of a permanent magnet synchronous motor via nonlinear and adaptive backstepping control , 2011, Math. Comput. Model..

[22]  Yimin Gao,et al.  A torque and speed coupling hybrid drivetrain-architecture, control, and simulation , 2006, IEEE Transactions on Power Electronics.

[23]  Enrique L. Carrillo-Arroyo.  Modeling and simulation of permanent magnet synchronous motor drive system , 2006 .

[24]  Hongbo Shi,et al.  Adaptive position tracking control of permanent magnet synchronous motor based on RBF fast terminal sliding mode control , 2013, Neurocomputing.

[25]  K. Belda,et al.  Speed control of PMSM drives by generalized predictive algorithms , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[26]  Yajun Guo,et al.  Self organizing fuzzy sliding mode controller for the position control of a permanent magnet synchronous motor drive , 2011 .

[27]  Rochdi Trigui,et al.  Global Forward-Backward Approach for a Systematic Analysis and Implementation of Hybrid Vehicle Management Laws. Application to a Two Clutches Parallel Hybrid Power Train. , 2004 .

[28]  Ramzi Trabelsi,et al.  Backstepping control for an induction motor using an adaptive sliding rotor-flux observer , 2012 .