Using instrumented small-scale models to study structural load paths in wood-framed buildings

Abstract A large 1/3-scale model of a light-framed wood structure was constructed in order to study the structural reactions to wind loads in a three-dimensional model of a residential building. Thirty load cells measuring structural reactions at roof-to-wall and wall-to-foundation connections were used to determine influence functions in response to surface pressures generated by extreme winds. The influence functions are used in a database-assisted design (DAD) methodology to estimate failure loads in structures subjected to spatio-temporally varying wind loads. Current numerical methods based on 2D component models alone can lead to underestimated failure loads and inadequate designs. This paper describes the approach to develop the physical models and to validate their applicability to full-scale houses. Non-dimensional modeling techniques are explained, and scale model material properties for sheathing, wood-framing members, nails and truss-plate connections are provided. The need for a robust experimental method for determining influence functions is critical as load distributions are unpredictable in these structurally indeterminate systems. Further, the 1/3-scale physical models provide an economical approach to generate a large dataset of empirically-based models needed to cover a wide variety of geometrically complex houses and to calibrate non-linear numerical analysis programs for further DAD studies. The approach introduced in this study can be applied to more complex roof geometries and also to study the combined effects of horizontal and vertical wind load distributions in wood buildings.

[1]  Rakesh Gupta,et al.  Database-assisted design methodology to predict wind-induced structural behavior of a light-framed wood building , 2011 .

[2]  Jean-Paul Pinelli,et al.  The Florida Coastal Monitoring Program (FCMP): A review , 2011 .

[3]  Rafik Y. Itani,et al.  Nonlinear Finite‐Element Model of Complete Light‐Frame Wood Structures , 1994 .

[4]  Ian F. C. Smith,et al.  Monitoring Structural Response of a Wooden Light-Frame Industrial Shed Building to Environmental Loads , 2005 .

[5]  Fahim Sadek,et al.  Experimental Testing of Roof to Wall Connections in Wood Frame Houses | NIST , 2003 .

[6]  Sundarrajan Mani.  Influence Functions for Evaluating Design Loads on Roof-Truss to Wall Connections in Low-Rise Buildings , 1997 .

[7]  J. W. van de Lindt,et al.  Energy-Based Similitude for Shake Table Testing of Scale Woodframe Structures , 2008 .

[8]  Fran Hunia,et al.  Three Little Pigs , 1940 .

[9]  Richard N. White,et al.  Structural Modeling and Experimental Techniques , 1999 .

[10]  Debra F. Laefer,et al.  Manufacturing, assembly, and testing of scaled, historic masonry for one-gravity, pseudo-static, soil-structure experiments , 2011 .

[11]  R. H. Leicester,et al.  Large models of low rise buildings loaded by the natural wind , 1983 .

[12]  Greg Foliente,et al.  Load-Sharing and Redistribution in a One-Story Woodframe Building , 2003 .

[13]  Ghasan Doudak,et al.  Experimental Evaluation of Load Paths in Light-Frame Wood Structure , 2012 .

[14]  Dv Rosowsky,et al.  Establishing Uplift Design Values for Metal Connectors in Light-Frame Construction , 1998 .

[15]  Timothy A. Reinhold,et al.  Field measurement and wind tunnel simulation of hurricane wind loads on a single family dwelling , 2009 .

[16]  Guk-Rwang Won.  American Society for Testing and Materials , 1987 .

[17]  Murray J. Morrison,et al.  "Three Little Pigs" Project: hurricane risk mitigation by integrated wind tunnel and full-scale laboratory tests , 2010 .

[18]  T. D. Reed,et al.  Uplift Capacity of Light-Frame Rafter to Top Plate Connections , 1997 .

[19]  Vinay Dayal,et al.  Finite element analysis of interaction of tornados with a low-rise timber building , 2011 .

[20]  Greg Foliente,et al.  Three-Dimensional Model of Light Frame Wood Buildings. II: Experimental Investigation and Validation of Analytical Model , 2005 .

[21]  Fahim Sadek,et al.  Achieving safer and more economical buildings through database-assisted, reliability-based design for wind , 2003 .

[22]  Dat Duthinh,et al.  Safety Evaluation of Low-Rise Steel Structures under Wind Loads by Nonlinear Database-Assisted Technique , 2007 .

[23]  Thomas H. Miller,et al.  Small-scale modeling of metal-plate-connected wood truss joints , 2005 .

[24]  Pranueng Limkatanyoo,et al.  Practical Approach to Designing Wood Roof Truss Assemblies , 2008 .

[25]  Kenneth G. Martin.  Evaluation of system effects and structural load paths in a wood-framed structure , 2010 .

[26]  Ronald W. Wolfe,et al.  Load Sharing Effects in Light-Frame Wood-Truss Assemblies , 2000 .

[27]  Dana P. Mizzell.  Wind Resistance of Sheathing for Residential Roofs , 1994 .

[28]  Jun Jae Lee,et al.  Study on half-scale model test for light-frame shear wall , 2002, Journal of Wood Science.

[29]  E. Buckingham.  On Physically Similar Systems; Illustrations of the Use of Dimensional Equations , 1914 .

[30]  Rakesh Gupta,et al.  Performance of Wood-Frame Structures during Hurricane Katrina , 2007 .

[31]  Rakesh Gupta,et al.  Modeling System Effects and Structural Load Paths in a Wood-Framed Structure , 2011 .