Experimental study of using PCM in brick constructive solutions for passive cooling

Abstract This work presents the results of an experimental set-up to test phase change materials with two typical construction materials (conventional and alveolar brick) for Mediterranean construction in real conditions. Several cubicles were constructed and their thermal performance throughout the time was measured. For each construction material, macroencapsulated PCM is added in one cubicle (RT-27 and SP-25 A8). The cubicles have a domestic heat pump as a cooling system and the energy consumption is registered to determine the energy savings achieved. The free-floating experiments show that the PCM can reduce the peak temperatures up to 1 °C and smooth out the daily fluctuations. Moreover, in summer 2008 the electrical energy consumption was reduced in the PCM cubicles about 15%. These energy savings resulted in a reduction of the CO2 emissions about 1–1.5 kg/year/m2.

[1]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[2]  D. Feldman,et al.  Energy-Storing Wallboard: Flammability Tests , 1998 .

[3]  D. Feldman,et al.  Control aspects of latent heat storage and recovery in concrete , 2000 .

[4]  Esam M. Alawadhi,et al.  Thermal analysis of a building brick containing phase change material , 2008 .

[5]  André Bontemps,et al.  Experimental investigation and computer simulation of thermal behaviour of wallboards containing a phase change material , 2006 .

[6]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .

[7]  N. Shamsundar,et al.  Solar Heat Storage: Latent Heat Materials, Vol. I: Background and Scientific Principles , 1983 .

[8]  J. T. Beard,et al.  Solar energy storage subsystems for the heating and cooling of buildings , 1975 .

[9]  A. Abhat.  Low Temperature Latent Heat Thermal Energy Storage , 1982 .

[10]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[11]  Telkes.  Solar heating and cooling , 2008 .

[12]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[13]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .