论文信息 - Chatter suppression in turning operations with a tuned vibration absorber

Chatter suppression in turning operations with a tuned vibration absorber

Abstract In this paper, a piezoelectric inertia actuator is mounted on the cutting tool and acted as a tuned vibration absorber for the suppression of chatter in turning operations. It is shown that the tuned vibration absorber can modify the frequency response function of the cutting tool so as to improve cutting stability in turning operations. Chatter can then be effectively suppressed due to the increase of cutting stability. Theoretical studies and experimental results performed in turning operations are presented to illustrate this approach.

[1] Daniel J. Inman,et al. Vibration: With Control, Measurement, and Stability , 1989 .

[2] Barry N. Lewendon,et al. Machine Tool Vibration , 1981, Other Conferences.

[3] Jiluo Zhou. On the cutting stability of the lathe under different working conditions , 1987 .

[4] R. Smith,et al. Dynamic vibration absorbers , 1998 .

[5] Kornel Ehmann,et al. Active chatter suppression by on-line variation of the rake and clearance angles in turning— principles and experimental investigations , 1994 .

[6] Y. S. Tarng,et al. A critical investigation of the phase shift between the inner and outer modulation for the control of machine tool Chatter , 1997 .

[7] Y. S. Tarng,et al. Automatic selection of spindle speed for suppression of regenerative chatter in turning , 1996 .

[8] Krzysztof Jemielniak,et al. Suppression of self-excited vibration by the spindle speed variation method , 1984 .

[9] A. TUSTIN,et al. Automatic Control Systems , 1950, Nature.

[10] S. M. Holzer,et al. Book Reviews : SYSTEM DYNAMICS Katsuhiko Ogata Prentice-Hall, Inc., Englewood Cliffs, NJ, 1978 , 1980 .

[11] A. Dimarogonas. Vibration for engineers , 1992 .

[12] Shih-Chieh Lin,et al. Low vibration control system in turning , 1992 .