Dynamics of MEMS Arches of Flexible Supports

We present an investigation into the dynamics of microelectromechanical systems (MEMS) arches when actuated electrically including the effect of their flexible supports. Using a shallow-arch model with rotational and transversal springs at its boundaries, a reduced-order model is developed. Shooting technique is utilized to find periodic motions. The stability of the captured periodic motion is examined using the Floquet theory. Simulation results are shown for the forced-vibration response of an arch when excited by a dc electrostatic force superimposed to an ac harmonic load. The results show softening behavior and several jumps in the response during snap-through motion and pull-in. It is demonstrated that nonideal boundary conditions can have significant effect on the qualitative dynamical behavior of the MEMS arch. This may include lowering its natural frequencies from the expected range of operation and causing unpredictable snap through or dynamic pull-in. Simulation results are compared to experimental data obtained for an imperfect microfabricated clamped-clamped beam with initial curvature actuated electrically for the cases of primary and superharmonic resonances.

[1]  M. Younis,et al.  An Experimental and Theoretical Investigation of Dynamic Pull-In in MEMS Resonators Actuated Electrostatically , 2010, Journal of Microelectromechanical Systems.

[2]  H. Fujita,et al.  Bistable nanowire for micromechanical memory , 2008 .

[3]  Hakan Boyaci,et al.  Effects of Non-ideal Boundary Conditions on Vibrations of Microbeams , 2007 .

[4]  Muthukumaran Packirisamy,et al.  Quantitative Boundary Support Characterization for Cantilever MEMS , 2007, Sensors.

[5]  T. Saif,et al.  Nonlinear dynamic study of a bistable MEMS: model and experiment , 2004, Journal of Microelectromechanical Systems.

[6]  S. Bouwstra,et al.  On the resonance frequencies of microbridges , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[7]  Muthukumaran Packirisamy,et al.  Boundary characterization of MEMS structures through electro-mechanical testing , 2008 .

[8]  H. Boyaci.  BEAM VIBRATIONS WITH NON-IDEAL BOUNDARY CONDITIONS , 2006 .

[9]  Dachao Li,et al.  Snap-Through and Pull-In Instabilities of an Arch-Shaped Beam Under an Electrostatic Loading , 2007, Journal of Microelectromechanical Systems.

[10]  Weili Cui,et al.  Nonlinear Dynamics of MEMS Arches Under Harmonic Electrostatic Actuation , 2010, Journal of Microelectromechanical Systems.

[11]  Muthukumaran Packirisamy,et al.  Dynamic testing of micromechanical structures under thermo-electro-mechanical influences , 2007 .

[12]  Yin Zhang,et al.  Analytical method of predicating the instabilities of a micro arch-shaped beam under electrostatic loading , 2010 .

[13]  M. Saif.  On a tunable bistable MEMS-theory and experiment , 2000, Journal of Microelectromechanical Systems.

[14]  H. Ouakad,et al.  The dynamic behavior of MEMS arch resonators actuated electrically , 2010 .

[15]  Ali H. Nayfeh,et al.  Investigation of Natural Frequencies and Mode Shapes of Buckled Beams , 1995 .

[16]  Harold G. Craighead,et al.  The pull-in behavior of electrostatically actuated bistable microstructures , 2008 .

[17]  Slava Krylov,et al.  Dynamic stability of electrostatically actuated initially curved shallow micro beams , 2010 .

[18]  Johann Arbocz,et al.  The effect of imperfect boundary conditions on the collapse behavior of anisotropic shells , 2000 .

[19]  Romesh C. Batra,et al.  Pull-in and snap-through instabilities in transient deformations of microelectromechanical systems , 2009 .

[20]  E.R. Deutsch,et al.  Effect of support compliance and residual stress on the shape of doubly supported surface-micromachined beams , 2000, Journal of Microelectromechanical Systems.

[21]  Alan Mathewson,et al.  Analysis of electromechanical boundary effects on the pull-in of micromachined fixed–fixed beams , 2003 .

[22]  Mehmet Pakdemirli,et al.  Vibrations of a Stretched Beam with Non-Ideal Boundary Conditions , 2001 .

[23]  M. Younis.  MEMS Linear and Nonlinear Statics and Dynamics , 2011 .

[24]  N. D. de Rooij,et al.  Laterally moving bistable MEMS DC switch for biomedical applications , 2005, Journal of Microelectromechanical Systems.

[25]  Mohd P. Omar,et al.  Theoretical modeling of boundary conditions in microfabricated beams , 1991, [1991] Proceedings. IEEE Micro Electro Mechanical Systems.

[26]  Fadi M. Alsaleem,et al.  On the nonlinear resonances and dynamic pull-in of electrostatically actuated resonators , 2009 .