Transient cooling response of smart vascular materials for self-cooling

Here we report the transient cooling performance of a body vascularized with tree-shaped channels supplied with coolant, which flows from one side of the body to the other. The vasculature consists of trees that alternate with upside down trees. Heat is generated volumetrically through the body at t=0. A time delay td separates the start of the flow of coolant from the start of heating. Three-dimensional simulations of conduction and convection in the solid-fluid composite show the formation and evolution of hot spots in the material. If the delay is not short enough, the maximum temperature of the body overshoots the maximum allowable level. The paper shows how to design the cooling delay time such that the hot-spot temperature does not exceed the safe level represented by the maximum temperature in the limit of steady state operation. The critical delay time is determined as a function of the applied pressure difference and the complexity of the dendritic flow architecture.Here we report the transient cooling performance of a body vascularized with tree-shaped channels supplied with coolant, which flows from one side of the body to the other. The vasculature consists of trees that alternate with upside down trees. Heat is generated volumetrically through the body at t=0. A time delay td separates the start of the flow of coolant from the start of heating. Three-dimensional simulations of conduction and convection in the solid-fluid composite show the formation and evolution of hot spots in the material. If the delay is not short enough, the maximum temperature of the body overshoots the maximum allowable level. The paper shows how to design the cooling delay time such that the hot-spot temperature does not exceed the safe level represented by the maximum temperature in the limit of steady state operation. The critical delay time is determined as a function of the applied pressure difference and the complexity of the dendritic flow architecture.

[1]  A. Bejan.  Shape and Structure, from Engineering to Nature , 2000 .

[2]  C. Elphick,et al.  Constructal Theory: From Engineering to Physics, and How Flow Systems Develop Shape and , 2006 .

[3]  A. Bejan.  Advanced Engineering Thermodynamics , 1988 .

[4]  P. Cheng,et al.  Heat transfer and pressure drop in fractal tree-like microchannel nets , 2002 .

[5]  D. Poulikakos,et al.  Laminar mixing, heat transfer and pressure drop in tree-like microchannel nets and their application for thermal management in polymer electrolyte fuel cells , 2004 .

[6]  A. Bejan,et al.  Constructal theory of generation of configuration in nature and engineering , 2006 .

[7]  S. Petrescu.  COMMENTS ON : THE OPTIMAL SPACING OF PARALLEL PLATES COOLED BY FORCED CONVECTION , 1994 .

[8]  M. El Haj Assad,et al.  Optimal structure for heat and cold protection under transient heat conduction , 2008 .

[9]  A. Bejan,et al.  Svelteness, freedom to morph, and constructal multi-scale flow structures , 2005 .

[10]  J. Hansen,et al.  Shape and Structure , 2001 .

[11]  Ewald R. Weibel,et al.  Symmorphosis: On Form and Function in Shaping Life , 2000 .

[12]  Dimos Poulikakos,et al.  Tree network channels as fluid distributors constructing double-staircase polymer electrolyte fuel cells , 2004 .

[13]  A. Karma,et al.  New paradigm for drug therapies of cardiac fibrillation. , 2000, Proceedings of the National Academy of Sciences of the United States of America.

[14]  Adrian Bejan,et al.  Tree-shaped flow structures designed by minimizing path lengths , 2002 .

[15]  Adrian Bejan,et al.  Vascularized materials: Tree-shaped flow architectures matched canopy to canopy , 2006 .

[16]  P. Cheng,et al.  An experimental investigation on the thermal efficiency of fractal tree-like microchannel nets , 2005 .

[17]  Adrian Bejan,et al.  Design with constructal theory , 2008 .

[18]  A. Bejan,et al.  Vascularization with trees that alternate with upside-down trees , 2007 .

[19]  Adrian Bejan,et al.  Vascularized networks with two optimized channel sizes , 2006 .

[20]  S. Bhattacharjee,et al.  The formation of a wall jet near a high temperature wall under microgravity environment , 1988 .

[21]  Adrian Bejan,et al.  Heterogeneous porous media as multiscale structures for maximum flow access , 2006 .