A Design Optimization Method Using Evidence Theory

Early in the engineering design cycle, it is difficult to quantify product reliability or compliance to performance targets due to insufficient data or information to model uncertainties. Probability theory cannot be, therefore, used. Design decisions are usually based on fuzzy information that is vague, imprecise qualitative, linguistic or incomplete. Recently, evidence theory has been proposed to handle uncertainty with limited information as an alternative to probability theory. In this paper, a computationally efficient design optimization method is proposed based on evidence theory, which can handle a mixture of epistemic and random uncertainties. It quickly identifies the vicinity of the optimal point and the active constraints by moving a hyperellipse in the original design space, using a reliability-based design optimization (RBDO) algorithm. Subsequently, a derivative-free optimizer calculates the evidence-based optimum, starting from the close-by RBDO optimum, considering only the identified active constraints. The computational cost is kept low by first moving to the vicinity of the optimum quickly and subsequently using local surrogate models of the active constraints only. Two examples demonstrate the proposed evidence-based design optimization method.

[1]  Lotfi A. Zadeh,et al.  Fuzzy Sets , 1996, Inf. Control..

[2]  W. Dong,et al.  Vertex method for computing functions of fuzzy variables , 1987 .

[3]  George J. Klir,et al.  Fuzzy sets, uncertainty and information , 1988 .

[4]  C. D. Perttunen,et al.  Lipschitzian optimization without the Lipschitz constant , 1993 .

[5]  T. Ross Fuzzy Logic with Engineering Applications , 1994 .

[6]  J. Kacprzyk,et al.  Advances in the Dempster-Shafer theory of evidence , 1994 .

[7]  George J. Klir,et al.  Fuzzy sets and fuzzy logic - theory and applications , 1995 .

[8]  Kemper Lewis,et al.  Collaborative, sequential, and isolated decisions in design , 1997 .

[9]  John E. Renaud,et al.  AN INVESTIGATION OF MULTIDISCIPLINARY DESIGN SUBJECT TO UNCERTAINTY , 1998 .

[10]  Robert L. Mullen,et al.  Bounds of Structural Response for All Possible Loading Combinations , 1999 .

[11]  Kyung K. Choi,et al.  A NEW STUDY ON RELIABILITY-BASED DESIGN OPTIMIZATION , 1999 .

[12]  Kenny Q. Ye,et al.  Algorithmic construction of optimal symmetric Latin hypercube designs , 2000 .

[13]  R. Mullen,et al.  Uncertainty in mechanics problems-interval-based approach , 2001 .

[14]  Jon C. Helton,et al.  Mathematical representation of uncertainty , 2001 .

[15]  Kari Sentz,et al.  Combination of Evidence in Dempster-Shafer Theory , 2002 .

[16]  Singiresu S Rao,et al.  Optimum Design of Mechanical Systems Involving Interval Parameters , 2002 .

[17]  R. Grandhi,et al.  Efficient estimation of structural reliability for problems with uncertain intervals , 2002 .

[18]  Jon C. Helton,et al.  Investigation of Evidence Theory for Engineering Applications , 2002 .

[19]  Young-Soon Yang,et al.  A comparative study on reliability-index and target-performance-based probabilistic structural design optimization , 2002 .

[20]  Donald R. Jones,et al.  Variable Screening in Metamodel Design by Cross-Validated Moving Least Squares Method , 2003 .

[21]  Xiaoping Du,et al.  Reliability-Based Design With the Mixture of Random and Interval Variables , 2003, DAC 2003.

[22]  Kyung K. Choi,et al.  Hybrid Analysis Method for Reliability-Based Design Optimization , 2003 .

[23]  John E. Renaud,et al.  Uncertainty quantification using evidence theory in multidisciplinary design optimization , 2004, Reliab. Eng. Syst. Saf..

[24]  R. Haftka,et al.  Comparison of Probability and Possibility for Design Against Catastrophic Failure Under Uncertainty , 2004 .

[25]  J. Tu,et al.  A Single-Loop Method for Reliability-Based Design Optimization , 2004, DAC 2004.

[26]  Ramana V. Grandhi,et al.  An approximation approach for uncertainty quantification using evidence theory , 2004, Reliab. Eng. Syst. Saf..

[27]  Ramana V. Grandhi,et al.  Epistemic uncertainty quantification techniques including evidence theory for large-scale structures , 2004 .

[28]  Kyung K. Choi,et al.  A NEW FUZZY ANALYSIS METHOD FOR POSSIBILITY-BASED DESIGN OPTIMIZATION , 2004 .

[29]  Jun Zhou,et al.  Reliability Estimation and Design with Insufficient Data Based on Possibility Theory , 2004 .