Correlation between the microstructure and corrosion behaviour of copper/316 L stainless-steel dissimilar-metal welded joints

[1]  S. Mandal,et al.  Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel , 2020 .

[2]  E. Han,et al.  Variations of galvanic currents and corrosion forms of 2024/Q235/304 tri-metallic couple with multivariable cathode/anode area ratios: Experiments and modeling , 2020 .

[3]  Hualiang Huang,et al.  Corrosion behavior of immersion silver printed circuit board copper under a thin electrolyte layer , 2020 .

[4]  H. Inoue,et al.  Relationship between the microstructure and local corrosion properties of weld metal in austenitic stainless steels , 2020 .

[5]  J. Scully,et al.  Localized Corrosion Behavior of Non-Equiatomic NiFeCrMnCo Multi-Principal Element Alloys , 2020 .

[6]  Qingming Chen,et al.  Copper alloying content effect on pitting resistance of modified 00Cr20Ni18Mo6CuN super austenitic stainless steels , 2020 .

[7]  A. Karimipour,et al.  Experimental investigation of temperature field and fusion zone microstructure in dissimilar pulsed laser welding of austenitic stainless steel and copper , 2020 .

[8]  A. Allanore,et al.  Electrolytic production of copper from chalcopyrite , 2020, Current Opinion in Electrochemistry.

[9]  K. Kaizu,et al.  Effects of tensile strength on friction welding condition and weld faying surface properties of friction welded joints between pure copper and austenitic stainless steel , 2020 .

[10]  Zhilong Cheng,et al.  MIG-TIG double-sided arc welding of copper-stainless steel using different filler metals , 2020 .

[11]  M. Lundström,et al.  Design of optimal electrolyte circulation based on the kinetic modelling of copper dissolution in silver electrorefining , 2020 .

[12]  Yunxiang Chen,et al.  Galvanic Corrosion Behavior of Copper–Drawn Steel for Grounding Grids in the Acidic Red Soil Simulated Solution , 2020, Acta Metallurgica Sinica (English Letters).

[13]  H. Xiong,et al.  Characterization of zirconium oxides part II: New insights on the growth of zirconia revealed through complementary high-resolution mapping techniques , 2020 .

[14]  P. Marcus,et al.  Thermal stability of the passive film formed on 316L stainless steel surface studied by ToF-SIMS , 2020, Corrosion Science.

[15]  B. Liu,et al.  Macro-galvanic effect and its influence on corrosion behaviors of friction stir welding joint of 7050-T76 Al alloy , 2020 .

[16]  Lianji Zhang,et al.  Understanding crystallographic orientation dependent dissolution rates of 90Cu-10Ni alloy: New insights based on AFM/SKPFM measurements and coordination number/electronic structure calculations , 2020 .

[17]  Huijun Kang,et al.  Corrosion behavior of as-cast Mg–5Sn based alloys with In additions in 3.5 wt% NaCl solution , 2020 .

[18]  J. Chaiprapa,et al.  Gas tungsten arc welding of copper to stainless steel for ultra-high vacuum applications , 2020 .

[19]  H. Jing,et al.  Microstructural evolution and oxidation behaviour of CF8A austenitic stainless steel during corrosion fatigue in a simulated pressurised water reactor environment , 2020 .

[20]  H. Jing,et al.  Effect of overload on the oxidation behavior of CF8A austenitic stainless steel in a high-temperature water environment , 2020 .

[21]  D. Engelberg,et al.  Reduction of austenite-ferrite galvanic activity in the heat-affected zone of a Gleeble-simulated grade 2205 duplex stainless steel weld , 2019 .

[22]  Qing-Guo Zhao,et al.  Improvement on corrosion resistance and biocompability of ZK60 magnesium alloy by carboxyl ion implantation , 2019, 1910.13219.

[23]  N. Nilius,et al.  In-situ optical view onto copper oxidation – role of reactive interfaces and self-heating , 2019, Corrosion Science.

[24]  Yanpeng Xue,et al.  Local electrochemical properties of fusion boundary region in SA508-309L/308L overlay welded joint , 2019, Corrosion Science.

[25]  Kyoung Joon Choi,et al.  Microstructural evolution and corrosion behaviour of thermally aged dissimilar metal welds of low-alloy steel and nickel-based alloy , 2019, Corrosion Science.

[26]  L. Ding,et al.  Continuous electrolytic refining process of cathode copper with non-dissolving anode , 2019, Minerals Engineering.

[27]  Xiaoyan Zeng,et al.  Microstructures and mechanical properties of laser-arc hybrid welded dissimilar pure copper to stainless steel , 2019, Optics & Laser Technology.

[28]  Hongdan Wang,et al.  Effect of jet flow between electrodes on power consumption and the apparent density of electrolytic copper powders , 2019, Powder Technology.

[29]  Ali Rafsanjani‐Abbasi,et al.  Correlation of surface Volta potential with galvanic corrosion initiation sites in solid-state welded Ti-Cu bimetal using AFM-SKPFM , 2018, Corrosion Science.

[30]  W. Ke,et al.  Influence of the secondary phase on micro galvanic corrosion of low carbon bainitic steel in NaCl solution , 2018 .

[31]  Dierk Raabe,et al.  Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution , 2018 .

[32]  H. Hu,et al.  Synergistic effects of fluoride and chloride on general corrosion behavior of AISI 316 stainless steel and pure titanium in H 2 SO 4 solutions , 2018 .

[33]  Lei Wang,et al.  Correlation of microstructure and stress corrosion cracking initiation behaviour of the fusion boundary region in a SA508 Cl. 3-Alloy 52M dissimilar weld joint in primary pressurized water reactor environment , 2017 .

[34]  B. Kim,et al.  Effect of grain size on the electrical conductivity of copper–iron alloys , 2017 .

[35]  Youn‐Bae Kang,et al.  Composites of copper and cast iron fabricated via the liquid: In the vicinity of the limits of strength in a non-deformed condition , 2017 .

[36]  E. Han,et al.  Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water , 2017 .

[37]  S. Kou,et al.  Macrosegregation in dissimilar-metal fusion welding , 2016 .

[38]  C. Örnek,et al.  SKPFM measured Volta potential correlated with strain localisation in microstructure to understand corrosion susceptibility of cold-rolled grade 2205 duplex stainless steel , 2015 .

[39]  A. Michaelides,et al.  Atomistic details of oxide surfaces and surface oxidation: the example of copper and its oxides , 2015, 1508.01005.

[40]  Jun Xia,et al.  Influence of processing parameters on the characteristics of stainless steel/copper laser welding , 2015 .

[41]  H. Hu,et al.  The effect of fluoride ions on the corrosion behavior of pure titanium in 0.05 M sulfuric acid , 2014 .

[42]  P. Chu,et al.  Eelectrochemical properties and corrosion resistance of carbon-ion-implanted magnesium , 2014 .

[43]  A. Davoodi,et al.  The role of constituent phases on corrosion initiation of NiAl bronze in acidic media studied by SEM–EDS, AFM and SKPFM , 2014 .

[44]  Amin Imani,et al.  Establishing a correlation between interfacial microstructures and corrosion initiation sites in Al/Cu joints by SEM–EDS and AFM–SKPFM , 2014 .

[45]  M. T. Montañés,et al.  Contribution of the flowing conditions to the galvanic corrosion of the copper/AISI 316L coupling in highly concentrated LiBr solutions , 2013 .

[46]  M. Finšgar.  Galvanic series of different stainless steels and copper- and aluminium-based materials in acid solutions , 2013 .

[47]  Ali Behnamfard,et al.  Production of copper cathode from oxidized copper ores by acidic leaching and two-step precipitation followed by electrowinning , 2013 .

[48]  E. Blasco-Tamarit,et al.  Imposed potential measurements to evaluate the pitting corrosion resistance and the galvanic behaviour of a highly alloyed austenitic stainless steel and its weldment in a LiBr solution at temperatures up to 150 °C , 2011 .

[49]  Vincent Vivier,et al.  Determination of effective capacitance and film thickness from constant-phase-element parameters , 2010 .

[50]  M. T. Montañés,et al.  The effect of temperature on the galvanic corrosion of the copper/AISI 304 pair in LiBr solutions under hydrodynamic conditions , 2010 .

[51]  M. T. Montañés,et al.  The influence of Reynolds number on the galvanic corrosion of the copper/AISI 304 pair in aqueous LiBr solutions , 2009 .

[52]  S. Mohan,et al.  Effect of pulse parameter on pulsed electrodeposition of copper on stainless steel , 2009 .

[53]  M. Safarzadeh,et al.  The effect of additives on anode passivation in electrorefining of copper , 2007 .

[54]  Y. S. Chen,et al.  Long-term anticorrosion behaviour of polyaniline on mild steel , 2007 .

[55]  A. Nishikata,et al.  Anticorrosive behavior of hydroxyapatite as an environmentally friendly pigment , 2002 .

[56]  J. N. Murray.  Electrochemical test methods for evaluating organic coatings on metals: an update. Part III: Multiple test parameter measurements , 1997 .

[57]  E. Zumelzu,et al.  Study on welding such dissimilar materials as AISI 304 stainless steel and DHP copper in a sea-water environment. Influence of weld metals on corrosion , 1996 .

[58]  Petrus Christiaan Pistorius,et al.  The nucleation and growth of corrosion pits on stainless steel , 1993 .

[59]  A. Munitz.  Liquid separation effects in Fe−Cu alloys solidified under different cooling rates , 1987 .

[60]  H. Uhlig.  Passivity in metals and alloys , 1980 .