Effect of GDL permeability on water and thermal management in PEMFCs—II. Clamping force

[1]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[2]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[3]  Chao-Yang Wang,et al.  Electron Transport in PEFCs , 2004 .

[4]  Göran Lindbergh,et al.  Flooding of Gas Diffusion Backing in PEFCs Physical and Electrochemical Characterization , 2004 .

[5]  J. Pharoah.  On the permeability of gas diffusion media used in PEM fuel cells , 2005 .

[6]  Wei Jiang,et al.  Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part I. Current status of modeling research and model development , 2006 .

[7]  Hyung Jin Sung,et al.  Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density , 2006 .

[8]  W. Tao,et al.  Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part II: Results of sensitivity analysis and validation of the model , 2006 .

[9]  M. Fowler,et al.  In-plane and through-plane gas permeability of carbon fiber electrode backing layers , 2006 .

[10]  N. Djilali,et al.  Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers , 2007 .

[11]  Chengwei Wu,et al.  Influence of clamping force on the performance of PEMFCs , 2007 .

[12]  H. Sung,et al.  Local current density and water management in PEMFCs , 2007 .

[13]  Hyung Jin Sung,et al.  Effect of GDL permeability on water and thermal management in PEMFCs - I. Isotropic and anisotropic permeability , 2008 .

[14]  Werner Lehnert,et al.  Diffusion media materials and characterisation , 2010 .