SPMSMs Sensorless Torque Estimation Using High Frequency Signal Injection
暂无分享,去创建一个
David Reigosa | Fernando Briz | Daniel Fernández | Ye Gu Kang | María Martínez | J. M. Guerrero | D. Fernández | J. Guerrero | D. Reigosa | F. Briz | Y. Kang | María Martínez
[1] Shih-Chin Yang,et al. Surface permanent magnet machine self-sensing at zero and low speeds using improved observer for position, velocity, and disturbance torque estimation , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).
[2] Robert D. Lorenz,et al. Efficiency Contours and Loss Minimization Over a Driving Cycle of a Variable Flux-Intensifying Machine , 2015, IEEE Transactions on Industry Applications.
[3] J. Pyrhonen,et al. Guidelines for Designing Concentrated Winding Fractional Slot Permanent Magnet Machines , 2007, 2007 International Conference on Power Engineering, Energy and Electrical Drives.
[4] Ya-Jun Pan,et al. Improved PMSM pulsating torque minimization with iterative learning and sliding mode observer , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.
[5] Luis Romeral,et al. Shaft Trajectory Analysis in a Partially Demagnetized Permanent-Magnet Synchronous Motor , 2013, IEEE Transactions on Industrial Electronics.
[6] D. Fernández,et al. PMSMs Torque Estimation Using Pulsating HF Current Injection , 2018, 2018 IEEE 9th International Symposium on Sensorless Control for Electrical Drives (SLED).
[7] Tomy Sebastian,et al. Temperature effects on torque production and efficiency of PM motors using NdFeB magnets , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.
[8] Greg Heins,et al. Accurate Torque Ripple Measurement for PMSM , 2011, IEEE Transactions on Instrumentation and Measurement.
[9] Robert D. Lorenz,et al. High-Frequency Injection-Based Stator Flux Linkage and Torque Estimation for DB-DTFC Implementation on IPMSMs Considering Cross-Saturation Effects , 2014 .
[10] Takashi Kato,et al. Comparative Analysis of BEMF and Pulsating High-Frequency Current Injection Methods for PM Temperature Estimation in PMSMs , 2017, IEEE Transactions on Power Electronics.
[11] Sanjib Kumar Panda,et al. Torque ripple minimization in PM synchronous motor using iterative learning control , 1999, IECON'99. Conference Proceedings. 25th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.99CH37029).
[12] R.D. Lorenz,et al. Fast and Smooth Initial Position and Magnet Polarity Estimation of Salient and Near Zero Saliency PM Synchronous Machines , 2005, IEEE International Conference on Electric Machines and Drives, 2005..
[13] Myung-Joong Youn,et al. A new instantaneous torque control of PM synchronous motor for high performance direct drive applications , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.
[14] R. McCann,et al. Torque measurements in synchronous generators using giant magnetoresistive sensor arrays via the Maxwell stress tensor , 2013, 2013 IEEE Power & Energy Society General Meeting.
[15] Jin Hur,et al. Analysis of cogging torque and torque ripple according to unevenly magnetized permanent magnets pattern in PMSM , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).
[16] Takashi Kato,et al. Permanent-Magnet Temperature Estimation in PMSMs Using Pulsating High-Frequency Current Injection , 2015, IEEE Transactions on Industry Applications.
[17] P. Sue,et al. High precision torque measurement on a rotating load coupling for power generation operations , 2012, 2012 IEEE International Instrumentation and Measurement Technology Conference Proceedings.
[18] Z. Q. Zhu,et al. Sensitivity of Manufacturing Tolerances on Cogging Torque in Interior Permanent Magnet Machines With Different Slot/Pole Number Combinations , 2017, IEEE Transactions on Industry Applications.
[19] Barry W. Williams,et al. Online Modeling for Switched Reluctance Motors Using B-Spline Neural Networks , 2007, IEEE Transactions on Industrial Electronics.
[20] Y. Mohamed,et al. Adaptive self-tuning MTPA vector controller for IPMSM drive system , 2006, IEEE Transactions on Energy Conversion.
[21] Robert D. Lorenz,et al. Deadbeat-Direct Torque and Flux Control of Interior Permanent Magnet Synchronous Machines With Discrete Time Stator Current and Stator Flux Linkage Observer , 2011, IEEE Transactions on Industry Applications.
[22] Kheng Cher Yeo,et al. Comparison of torque estimators for PMSM , 2008, 2008 Australasian Universities Power Engineering Conference.
[23] F. Blaabjerg,et al. Combined Flux Observer With Signal Injection Enhancement for Wide Speed Range Sensorless Direct Torque Control of IPMSM Drives , 2008, IEEE Transactions on Energy Conversion.
[24] Z. Zhu,et al. Influence of Electric Loading and Magnetic Saturation on Cogging Torque, Back-EMF and Torque Ripple of PM Machines , 2012, IEEE Transactions on Magnetics.
[25] Fernando Briz,et al. Magnet temperature estimation in surface PM machines using high frequency signal injection , 2009, 2009 IEEE Energy Conversion Congress and Exposition.
[26] Marcelo A Pérez,et al. Torque ripple modeling of a permanent magnet synchronous motor , 2010, 2010 IEEE International Conference on Industrial Technology.
[27] Robert D. Lorenz,et al. Saliency based Self-Sensing Enhanced Operating Condition Monitoring Using High-Frequency Injection Under Intentional Magnetic Saturation , 2019, 2019 IEEE International Electric Machines & Drives Conference (IEMDC).
[28] Wang Tianmiao,et al. Comparison between model reference observer and reduced order observer of PMSM torque , 2011, 2011 6th IEEE Conference on Industrial Electronics and Applications.
[29] G. Scelba,et al. Steady-State and Transient Operation of IPMSMs Under Maximum-Torque-per-Ampere Control , 2010, IEEE Transactions on Industry Applications.
[30] Mark Yim,et al. Cogging Torque Ripple Minimization via Position Based Characterization , 2014, Robotics: Science and Systems.
[31] Jacek F. Gieras,et al. Permanent magnet motor technology : design and applications , 1996 .
[32] Kay Hameyer,et al. High-Performance Adaptive Torque Control for an IPMSM With Real-Time MTPA Operation , 2017, IEEE Transactions on Energy Conversion.
[33] Olli Pyrhonen,et al. Advanced measurement of rotor vibration in electric drives , 1998 .
[34] G. Heins,et al. Cogging torque estimation for sensorless PMSM , 2012, 2012 XXth International Conference on Electrical Machines.
[35] Bing Cheng,et al. Torque Feedforward Control Technique for Permanent Magnet Synchronous Motors , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.
[36] Damir Sumina,et al. Comparison of torque estimation methods for interior permanent magnet wind power generator , 2017, 2017 19th International Conference on Electrical Drives and Power Electronics (EDPE).