Investigation of Bond Strength of Spray Dried Hydroxyapatite-Wollastonite Composite Powder After Plasma Spray

[1]  G. Wen,et al.  Effect of milling conditions on the properties of HA/Ti feedstock powders and plasma-sprayed coatings , 2014 .

[2]  A. Jalar,et al.  In-vitro bioactivity of wollastonite materials derived from limestone and silica sand , 2014 .

[3]  Huiliang Cao,et al.  Plasma‐Sprayed Ceramic Coatings for Osseointegration , 2013 .

[4]  Fuzhen Xuan,et al.  Mechanical Properties and Dissolution Behavior of Plasma Sprayed Wollastonite Coatings Deposited at Different Substrate Temperatures , 2012, Journal of Thermal Spray Technology.

[5]  Y. Mai,et al.  Morphologic and nanomechanical characterization of bone tissue growth around bioactive sol–gel coatings containing wollastonite particles applied on stainless steel implants , 2011 .

[6]  Hong Li,et al.  Characterization of plasma sprayed hydroxyapatite/ZrO2 graded coating , 2009 .

[7]  M. Morra,et al.  Bioactive calcium silicate ceramics and coatings. , 2008, Biomedicine & pharmacotherapy = Biomedecine & pharmacotherapie.

[8]  G. Albertini,et al.  Plasma sprayed hydroxyapatite coatings from nanostructured granules , 2008 .

[9]  M. A. Encinas-Romero,et al.  Synthesis and Characterization of Hydroxyapatite–Wollastonite Composite Powders by Sol–Gel Processing , 2008 .

[10]  A. Kobayashi,et al.  Effect of gun current on the microstructure and crystallinity of plasma sprayed hydroxyapatite coatings , 2007 .

[11]  J. Cizek,et al.  Influence of spraying conditions on thermal and velocity properties of plasma sprayed hydroxyapatite , 2007 .

[12]  Hua Li,et al.  Characteristics of the nanostructures in thermal sprayed hydroxyapatite coatings and their influence on coating properties , 2006 .

[13]  Robert B. Heimann,et al.  Thermal spraying of biomaterials , 2006 .

[14]  Xuanyong Liu,et al.  In vivo evaluation of plasma-sprayed wollastonite coating. , 2005, Biomaterials.

[15]  Jung‐Kun Lee,et al.  New type of bioactive materials: Hydroxyapatite/α-wollastonite composites , 2005 .

[16]  C. Ding,et al.  Study on Plasma Sprayed Calcium Silicate Coatings , 2005 .

[17]  P. Chu,et al.  Mechanism of apatite formation on wollastonite coatings in simulated body fluids. , 2004, Biomaterials.

[18]  Xuanyong Liu,et al.  Morphology of apatite formed on surface of wollastonite coating soaked in simulate body fluid , 2002 .

[19]  Xuanyong Liu,et al.  Plasma sprayed wollastonite/TiO2 composite coatings on titanium alloys. , 2002, Biomaterials.

[20]  Xuanyong Liu,et al.  Thermal properties and microstructure of a plasma sprayed wollastonite coating , 2002 .

[21]  K. Khor,et al.  Properties of heat-treated calcium phosphate coatings deposited by high-velocity oxy-fuel (HVOF) spray. , 2002, Biomaterials.

[22]  Xuanyong Liu,et al.  Characterization of plasma sprayed wollastonite powder and coatings , 2002 .

[23]  K. Khor,et al.  An in vitro investigation of plasma sprayed hydroxyapatite (HA) coatings produced with flame-spheroidized feedstock. , 2002, Biomaterials.

[24]  K. Khor,et al.  Titanium dioxide reinforced hydroxyapatite coatings deposited by high velocity oxy-fuel (HVOF) spray. , 2002, Biomaterials.

[25]  E. Chang,et al.  Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti-6Al-4V substrate. , 2001, Biomaterials.

[26]  Xuanyong Liu,et al.  Phase compositions and microstructure of plasma sprayed wollastonite coating , 2001 .

[27]  K. Khor,et al.  The evaluation of powder processing on microstructure and mechanical properties of hydroxyapatite (HA)/yttria stabilized zirconia (YSZ) composite coatings , 2001 .

[28]  X. Liu,et al.  Apatite formed on the surface of plasma-sprayed wollastonite coating immersed in simulated body fluid. , 2001, Biomaterials.

[29]  Hua Li,et al.  Effect of the powders’ melting state on the properties of HVOF sprayed hydroxyapatite coatings , 2000 .

[30]  K. Khor,et al.  Plasma-sprayed hydroxyapatite (HA) coatings with flame-spheroidized feedstock: microstructure and mechanical properties. , 2000, Biomaterials.

[31]  C. Ding,et al.  Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings. , 2000, Biomaterials.

[32]  C. Doyle,et al.  Plasma sprayed hydroxyapatite coatings on titanium substrates. Part 1: Mechanical properties and residual stress levels. , 1998, Biomaterials.

[33]  H. Koerten,et al.  Some characteristics of hydroxylapatite powder particles after plasma spraying. , 1998, Biomaterials.

[34]  K. Khor,et al.  Plasma spraying of combustion flame spheroidized hydroxyapatite (HA) powders , 1998 .

[35]  K A Gross,et al.  Thermal processing of hydroxyapatite for coating production. , 1998, Journal of biomedical materials research.

[36]  K. Khor,et al.  The thermal spray processing of HA powders and coatings , 1997 .

[37]  K. Khor,et al.  Plasma sprayed hydroxyapatite(HA) coatings produced with flame spheroidised powders , 1997 .

[38]  K. Khor,et al.  Addressing processing problems associated with plasma spraying of hydroxyapatite coatings. , 1996, Biomaterials.

[39]  W. Tong,et al.  Effect of particle size on molten states of starting powder and degradation of the relevant plasma-sprayed hydroxyapatite coatings. , 1996, Biomaterials.

[40]  K. Khor,et al.  Thermal spraying of hydroxyapatite (HA) coatings: Effects of powder feedstock , 1995 .