The impact of micromachined ultrasonic radiators on the efficiency of transducers in air.

The use of micromachined thin-film ultrasonic radiators to improve the efficiency of conventional in-air acoustic transducers is investigated. We conduct a theoretical investigation of the parameters that determine the efficiency of thin-film transducers, using a lumped parameter model, and show that the efficiency can be improved by choosing a radiating plate thickness that can be realized by micromachining. We also identified the problems that should be overcome to design and fabricate a micromachined ultrasonic transducer with the theoretically predicted efficiency. Based on the lumped parameter model, we showed that the problems can be resolved via an appropriate design scheme. A piezoelectric micromachined ultrasonic transducer is designed and fabricated to demonstrate the impact of the proposed design method. Test results for the fabricated radiator indicated that it provided an electroacoustic efficiency of 58.4%, up to 300% greater than either the unit previously fabricated by the authors or conventional unimorph ultrasonic transducers. An array of the proposed transducers was also designed, fabricated, and tested as a source transducer for a parametric array, since transducer efficiency is important for practical applications of a parametric array. The test results for the proposed transducer demonstrate its potential for improving the practicality of parametric array sources, such as parametric loudspeakers and directional ultrasonic ranging sensors.

[1]  Jongkyu Park,et al.  Design of an ultrasonic sensor for measuring distance and detecting obstacles. , 2010, Ultrasonics.

[2]  R. Pritchard.  Mutual Acoustic Impedance between Radiators in an Infinite Rigid Plane , 1960 .

[3]  Jaume Esteve,et al.  Parasitic effect on silicon MEMS resonator model parameters , 2007 .

[4]  Haksue Lee,et al.  A micro-machined source transducer for a parametric array in air. , 2009, The Journal of the Acoustical Society of America.

[5]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[6]  Haksue Lee,et al.  Improvements in electrical properties of piezoelectric microcantilever sensors by reducing parasitic effects , 2011 .

[7]  G. Lim,et al.  Effects of mutual impedance on the radiation characteristics of transducer arrays , 2004 .

[8]  A G Webster,et al.  Acoustical Impedance and the Theory of Horns and of the Phonograph. , 1919, Proceedings of the National Academy of Sciences of the United States of America.

[9]  Adrian Neild,et al.  Radiated fields of capacitive micromachined ultrasonic transducers in air. , 2003, The Journal of the Acoustical Society of America.

[10]  James L. Crowley,et al.  World modeling and position estimation for a mobile robot using ultrasonic ranging , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[11]  Colin H. Hansen,et al.  Investigation into the feasibility of using a parametric array control source in an active noise control system , 2005 .

[12]  Jian-Qiao Sun,et al.  Piezoelectrically driven speakers for active aircraft interior noise suppression , 1999 .

[13]  D. Schindel,et al.  The use of broadband acoustic transducers and pulse-compression techniques for air-coupled ultrasonic imaging. , 2001, Ultrasonics.

[14]  Lawrence E. Kinsler,et al.  Fundamentals of acoustics , 1950 .

[15]  Abdullah Atalar,et al.  Micromachined two-dimensional array piezoelectrically actuated transducers , 1998 .

[16]  Martin A. Schmidt,et al.  Inertial sensor technology using DRIE and wafer bonding with connecting capability , 1999 .

[17]  Abdullah Atalar,et al.  Silicon micromachined ultrasonic immersion transducers , 1996 .

[18]  Paul Muralt,et al.  Micromachined Ultrasonic Transducers and Acoustic Sensors Based on Piezoelectric Thin Films , 2004 .

[19]  M. Kupnik,et al.  50 kHz capacitive micromachined ultrasonic transducers for generation of highly directional sound with parametric arrays , 2009, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[20]  Chen Chao,et al.  Micromachined thick film piezoelectric ultrasonic transducer array , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[21]  Juan A. Gallego-Juárez,et al.  An ultrasonic transducer for high power applications in gases , 1978 .

[22]  J A Gallego-Juárez,et al.  Power ultrasonic transducers with extensive radiators for industrial processing. , 2010, Ultrasonics sonochemistry.

[23]  Charles H. Sherman,et al.  Transducers and Arrays for Underwater Sound , 2008 .

[24]  Haksue Lee,et al.  A stepped-plate bi-frequency source for generating a difference frequency sound with a parametric array. , 2010, The Journal of the Acoustical Society of America.

[25]  Frank Joseph Pompei,et al.  The Use of Airborne Ultrasonics for Generating Audible Sound Beams , 1999 .

[26]  M. Yoneyama,et al.  The audio spotlight: An application of nonlinear interaction of sound waves to a new type of loudspeaker design , 1983 .