RESISTANCE OF THERMALLY MODIFIED Eucalyptus grandis

There are currently in operation five major European industrial processes for wood thermal modification. They improve wood’s dimensional stability and decay resistance, but are not efficient against termites attack. In fact, there is little research about the effect of thermal modification on wood resistance to termites, whether subterranean or dry-wood termites. The aim of this study was to evaluate the effect of the Brazilian process of thermal modification (VAP HolzSysteme®) on the resistance of Eucalyptus grandis wood to attack by Cryptotermes sp. dry-wood termites. Five treatments were tested: untreated eucalypt wood, thermally modified eucalypt wood at three final temperatures (140, 160 and 180 °C) and pine wood (control). The attack was evaluated in terms of mass loss, mean score of wear grades, number of holes and termites mortality, according to a Brazilian method proposed by the Technological Research Institute of São Paulo. Similarly to the European processes of thermal modification, the Brazilian VAP HolzSysteme® was not effective to improve wood resistance to dry-wood termites attack, at least in the evaluated conditions.

[1]  G. I. Muñiz,et al.  RESISTANCE OF THERMALLY MODIFIED Eucalyptus grandis W. Hill ex Maiden WOOD TO DETERIORATION BY DRY-WOOD TERMITES ( Cryptotermes sp.) , 2016 .

[2]  G. I. Muñiz,et al.  MICROSTRUCTURAL ASPECTS OF THERMALLY MODIFIED Eucalyptus grandis WOOD , 2015 .

[3]  B. Bazyar.  DECAY RESISTANCE AND PHYSICAL PROPERTIES OF OIL HEAT TREATED ASPEN WOOD , 2012 .

[4]  M. Pétrissans,et al.  Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus patula , 2011, European Journal of Wood and Wood Products.

[5]  Ricardo Jorge Klitzke,et al.  Efeito do tempo e da temperatura de modificação térmica na redução do inchamento máximo da madeira de Eucalyptus grandis Hill ex Maiden , 2011 .

[6]  Jianxiong Lu,et al.  EVALUATION OF DECAY RESISTANCE FOR STEAM-HEAT-TREATED WOOD , 2011 .

[7]  A. Ballarin,et al.  Physical and mechanical properties of thermally modified wood from E. grandis , 2011, European Journal of Wood and Wood Products.

[8]  S. Pang,et al.  Changes in chemistry, color, dimensional stability and fungal resistance of Pinus radiata D. Don wood with oil heat-treatment , 2011 .

[9]  Ricardo Jorge Klitzke,et al.  Densidade básica e retratibilidade da madeira de clones de três espécies de Eucalyptus , 2010 .

[10]  E. Furtado,et al.  Decay resistance of thermally-modified Eucalyptus grandis wood at 140 degrees C, 160 degrees C, 180 degrees C, 200 degrees C and 220 degrees C. , 2010, Bioresource technology.

[11]  Helena Pereira,et al.  Wood modification by heat treatment: a review. , 2009 .

[12]  Liu Yi-xing,et al.  Heat-treated wood and its development in Europe , 2002, Journal of Forestry Research.

[13]  M. Pétrissans,et al.  Evaluation of thermally modified Grevillea robusta heartwood as an alternative to shortage of wood resource in Kenya: Characterisation of physicochemical properties and improvement of bio-resistance. , 2007, Bioresource technology.

[14]  B. Esteves.  Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200ºC , 2007 .

[15]  H. Pereira,et al.  Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood , 2007, Wood Science and Technology.

[16]  J. C. Silva,et al.  VARIAÇÃO DA RETRATIBILIDADE DA MADEIRA DE Eucalyptus grandis Hill ex. Maiden, EM FUNÇÃO DA IDADE E DA POSIÇÃO RADIAL NO TRONCO 1 , 2006 .

[17]  José Nivaldo Garcia,et al.  Densidade básica e retratibilidade da madeira de Eucalyptus grandis,submetida a diferentes temperaturas de termorretificação , 2006 .

[18]  J. C. Silva,et al.  Influência da idade na resistência natural da madeira de Eucalyptus grandis W. Hill ex. Maiden ao ataque de cupim de madeira seca (Cryptotermes brevis) , 2004 .

[19]  A. Pizzi,et al.  Durability of heat-treated wood , 2002, Holz als Roh- und Werkstoff.