Impact of social and technical lean management on operational performance in manufacturing SMEs: the roles of process and management innovations

PurposeThe purpose of the current study is to address a debatable issue in the extant literature regarding lean management (LM), innovation and operational performance (OP) relationships in the manufacturing SMEs. It conceptualizes LM in terms of social and technical aspects and investigates their effects on process innovation, management innovation and OP. The mediating roles of process and management innovations on social/technical-OP relationships are also explored.Design/methodology/approachThe study analyzes survey data gathered from 268 manufacturing SMEs belonging to different industry types in Jordan. Validity and reliability tests of the first and second order constructs were performed. Structural equation modeling (SEM) was used to test the study hypotheses.FindingsBoth social and technical LM were found to positively affect OP. Social LM positively affected both process and management innovations. However, the effect of technical LM on both types of innovation was not significant. In addition, process and management innovations positively mediated social LM-OP relationship. Nonetheless, neither type of innovation showed mediating effects on technical LM-OP relationship.Originality/valueThis study is one of the first to highlight the proposed relationships, in general, and in the context of SMEs in a developing country context, in particular. It offers important implications for the managers of SMEs to benefit from LM implementation and avoid its failure, enhance innovation efforts by focusing on social LM practices and subsequently achieve higher levels of OP.

[1]  Ayman Bahjat Abdallah,et al.  Agile manufacturing and business performance , 2018, Bus. Process. Manag. J..

[2]  A. Abdallah,et al.  Lean Supply Chain Management Practices and Performance: Empirical Evidence from Manufacturing Companies , 2018 .

[3]  P. Shrout,et al.  Mediation in experimental and nonexperimental studies: new procedures and recommendations. , 2002, Psychological methods.

[4]  R. V. Krejcie,et al.  Determining Sample Size for Research Activities , 1970 .

[5]  S. Leminen.  Q&A.What are living labs? , 2015 .

[6]  Dirk Van Goubergen,et al.  Operational performance and critical success factors of lean manufacturing in European food processing SMEs , 2013 .

[7]  Rasha Zuhair Alkhaldi,et al.  Lean bundles in health care: a scoping review. , 2019, Journal of health organization and management.

[8]  P. Humphreys,et al.  The mediating influence of organisational cultural practices in successful lean management implementation. , 2020, International Journal of Production Economics.

[9]  David Gallear,et al.  Is lean service promising? A socio-technical perspective , 2016 .

[10]  Evangelos Psomas,et al.  The impact of “soft” and “hard” TQM elements on quality management results , 2009 .

[11]  Mohamed G. Aboelmaged,et al.  Harvesting organizational knowledge and innovation practices: An empirical examination of their effects on operations strategy , 2012, Bus. Process. Manag. J..

[12]  Peter T. Ward,et al.  Lean manufacturing: context, practice bundles, and performance , 2003 .

[13]  A. Abdallah,et al.  The effect of supply chain integration on technical innovation in Jordan , 2017 .

[14]  Ayman Bahjat Abdallah,et al.  The Influence of “Soft” and “Hard” Total Quality Management (TQM) Practices on Total Productive Maintenance (TPM) in Jordanian Manufacturing Companies , 2013 .

[15]  Anand Nair,et al.  Relationship between just-in-time manufacturing practices and performance: A meta-analytic investigation , 2010 .

[16]  Yoshiki Matsui,et al.  Quality management practices and competitive performance: Empirical evidence from Japanese manufacturing companies , 2011 .

[17]  Kannan Govindan,et al.  Environmental management and operational performance in automotive companies in Brazil: The role of human resource management and lean manufacturing , 2013 .

[18]  Harry Boer,et al.  Innovation, what innovation? A comparison between product, process and organisational innovation , 2001, Int. J. Technol. Manag..

[19]  Qing Hu,et al.  Lean implementation within SMEs: a literature review , 2015 .

[20]  E. Siachou,et al.  A perspective on knowledge sharing and lean management: an empirical investigation , 2020, Knowledge Management Research & Practice.

[21]  F. Damanpour,et al.  Combinative Effects of Innovation Types and Organizational Performance: A Longitudinal Study of Service Organizations , 2009 .

[22]  Ayman Bahjat Abdallah,et al.  Green supply chain management and business performance , 2019, Bus. Process. Manag. J..

[23]  Raed El-Khalil,et al.  The mediating impact of sustainability on the relationship between agility and operational performance , 2020 .

[24]  José Moyano-Fuentes,et al.  International Journal of Operations & Production Management Emerald Article: Learning on lean: a review of thinking and research , 2012 .

[25]  Mary J. Benner,et al.  Process Management and Technological Innovation: A Longitudinal Study of the Photography and Paint Industries , 2002 .

[26]  Jeroen P. van den Berg,et al.  Improving operational performance by influencing shopfloor behavior via performance management practices , 2011 .

[27]  Sebastian Engel,et al.  The application of lean principles and its effects in technology development , 2012, Int. J. Technol. Manag..

[28]  Stefan Lagrosen,et al.  The effects of quality management – a survey of Swedish quality professionals , 2005 .

[29]  Barbara B. Flynn,et al.  The impact of supply chain integration on performance: A contingency and configuration approach , 2010 .

[30]  Kevin Grant,et al.  International Journal of Information Management , 2022 .

[31]  S. Deshmukh,et al.  Strategy development by SMEs for competitiveness: a review , 2008 .

[32]  S. Parker.  Longitudinal effects of lean production on employee outcomes and the mediating role of work characteristics. , 2003, The Journal of applied psychology.

[33]  Vasco Augusto Sanchez Rodrigues,et al.  Synergetic effect of lean and green on innovation: A resource-based perspective , 2020, International Journal of Production Economics.

[34]  Elizabeth L. Rose,et al.  Where to search for process innovations? The mediating role of absorptive capacity and its impact on process innovation , 2019, Industrial Marketing Management.

[35]  Jan Olhager,et al.  Lean and agile manufacturing: external and internal drivers and performance outcomes , 2009 .

[36]  Seyed Mohammad,et al.  A proposed dynamic model for a lean roadmap , 2011 .

[37]  Andrea Vinelli,et al.  Interrelationships among lean bundles and their effects on operational performance , 2008 .

[38]  DuckJung Shin,et al.  Lean management strategy and innovation: moderation effects of collective voluntary turnover and layoffs , 2020, Total Quality Management & Business Excellence.

[39]  Yoshiki Matsui,et al.  The impact of hard and soft quality management on quality and innovation performance: An empirical study ☆ , 2015 .

[40]  Roger G. Schroeder,et al.  The impact of just-in-time manufacturing and its infrastructure on manufacturing performance , 1997 .

[41]  Yoshiki Matsui,et al.  An empirical analysis of just-in-time production in Japanese manufacturing companies , 2007 .

[42]  Ana B. Escrig-Tena,et al.  The impact of hard and soft quality management and proactive behaviour in determining innovation performance , 2018, International Journal of Production Economics.

[43]  D. Mehri.  The Darker Side of Lean: An Insider's Perspective on the Realities of the Toyota Production System , 2006 .

[44]  Hai-Fen Lin,et al.  How dynamic capabilities affect adoption of management innovations , 2016 .

[45]  A. Oke,et al.  Innovation types and performance in growing UK SMEs , 2007 .

[46]  S. Koh,et al.  A casual analysis of the impact of information systems and supply chain management practices on operational performance : evidence from manufacturing SMEs in Turkey , 2009 .

[47]  Shams Rahman,et al.  Soft TQM, hard TQM, and organisational performance relationships: an empirical investigation , 2004 .

[48]  Amrik S. Sohal,et al.  The relationship between organization strategy, total quality management (TQM), and organization performance--the mediating role of TQM , 2006, Eur. J. Oper. Res..

[49]  Suthep Nimsai,et al.  Factors influencing the purchase intention of halal packaged food in Thailand , 2018 .

[50]  Ángel L. Meroño-Cerdán,et al.  International Journal of Information Management Strategic Knowledge Management, Innovation and Performance , 2022 .

[51]  Jiju Antony,et al.  Lean Six Sigma and Innovation – an exploratory study among UK organisations , 2016 .

[52]  J. Birkinshaw,et al.  Management innovation , 2005, IEEE Engineering Management Review.

[53]  G. Byrne,et al.  Using a Lean Six Sigma approach to drive innovation , 2007 .

[54]  G. Giannopoulos,et al.  The use of the balanced scorecard in small companies , 2013 .

[55]  A. Sohal,et al.  The relationship between TQM practices, quality performance, and innovation performance: An empirical examination , 2003 .

[56]  Z. Ahmadi,et al.  Market and innovation orientation typology: proposition and illustrations , 2016 .

[57]  David D. Dobrzykowski,et al.  Strategic customer service orientation, lean manufacturing practices and performance outcomes , 2014 .

[58]  Jesús Perdomo-Ortiz,et al.  Total quality management as a forerunner of business innovation capability , 2006 .

[59]  Ram Narasimhan,et al.  The impact of operations capability on firm performance , 2007 .

[60]  Patricia J. Daugherty,et al.  The relationship between strategic orientation, service innovation, and performance , 2009 .

[61]  Rosemary R. Fullerton,et al.  Lean Manufacturing, Non-Financial Performance Measures, and Financial Performance , 2009 .

[62]  A. Abdallah,et al.  The impact of soft TQM on financial performance , 2018, International Journal of Quality & Reliability Management.

[63]  Justin J. P. Jansen,et al.  Management Innovation and Leadership: The Moderating Role of Organizational Size , 2012 .

[64]  Meera Alagaraja,et al.  Lean Thinking as applied to the adult education environment , 2010 .

[65]  Roger G. Schroeder,et al.  THE ROLE OF INFRASTRUCTURE PRACTICES IN THE EFFECTIVENESS OF JIT PRACTICES: IMPLICATIONS FOR PLANT COMPETITIVENESS , 2003 .

[66]  Hongyi Chen,et al.  Exploring the impact of lean management on innovation capability , 2009, PICMET '09 - 2009 Portland International Conference on Management of Engineering & Technology.

[67]  Sandeep Singh Virdi,et al.  The effect of TQM practices on operational performance: an empirical analysis of ISO 9001: 2008 certified manufacturing organizations in Ethiopia , 2020 .

[68]  James C. Anderson,et al.  STRUCTURAL EQUATION MODELING IN PRACTICE: A REVIEW AND RECOMMENDED TWO-STEP APPROACH , 1988 .

[69]  M. Chen,et al.  Does innovation lead to performance? An empirical study of SMEs in Taiwan , 2007 .

[70]  R. S. Vasconcelos,et al.  Does innovation make a difference? , 2018, Innovation & Management Review.

[71]  Rasha Zuhair Alkhaldi,et al.  Lean management and operational performance in health care , 2019, International Journal of Productivity and Performance Management.

[72]  Richard J. Schonberger,et al.  The disintegration of lean manufacturing and lean management , 2019, Business Horizons.

[73]  Firm Resources and Sustained Competitive Advantage , 1991 .

[74]  Satya Shah,et al.  Lean production and supply chain innovation in baked foods supplier to improve performance , 2017 .

[75]  Neena Sinha,et al.  A comprehensive insight into Lean management: Literature review and trends , 2019, Journal of Industrial Engineering and Management.

[76]  Saumyaranjan Sahoo,et al.  Lean manufacturing practices and performance: the role of social and technical factors , 2019, International Journal of Quality & Reliability Management.

[77]  C. Fornell,et al.  Evaluating Structural Equation Models with Unobservable Variables and Measurement Error , 1981 .

[78]  T. Bortolotti,et al.  Successful lean implementation: Organizational culture and soft lean practices , 2015 .

[79]  A. Rezvani,et al.  Management innovation: A systematic review and meta-analysis of past decades of research , 2019, European Management Journal.

[80]  F. Damanpour,et al.  Managerial Innovation: Conceptions, Processes and Antecedents , 2012, Management and Organization Review.

[81]  E. Trist,et al.  Some Social and Psychological Consequences of the Longwall Method of Coal-Getting , 1951 .

[82]  J. Weerawardena.  Exploring the role of market learning capability in competitive strategy , 2003 .

[83]  Lars Hvam,et al.  Product complexity and operational performance: A systematic literature review , 2019, CIRP Journal of Manufacturing Science and Technology.

[84]  C. McDermott,et al.  The relationship between total quality management practices and organizational culture , 2005 .

[85]  C. Mothe,et al.  The differentiated impacts of organizational innovation practices on technological innovation persistence , 2015 .

[86]  Andrew Lim,et al.  Reliable logistics networks design with facility disruptions , 2011 .

[87]  J. Barney.  Firm Resources and Sustained Competitive Advantage , 1991 .

[88]  Norlena Hasnan,et al.  Lean production and TQM: Complementary or Contradictory Driving Forces of Innovation Performance? , 2013 .

[89]  Thomas Neitzert,et al.  Implementing lean—Outcomes from SME case studies , 2018 .

[90]  Rachna Shah,et al.  Defining and developing measures of lean production , 2007 .

[91]  Ahmad Fathi Al-Sa'di,et al.  The mediating role of product and process innovations on the relationship between knowledge management and operational performance in manufacturing companies in Jordan , 2017, Bus. Process. Manag. J..

[92]  F. Damanpour.  Organizational Innovation: A Meta-Analysis Of Effects Of Determinants and Moderators , 1991 .

[93]  Gillian H. Wright,et al.  The contribution of measurement and information infrastructure to TQM success , 2006 .

[94]  Kazuhiro Asakawa,et al.  Types of R&D Collaborations and Process Innovation: The Benefit of Collaborating Upstream in the Knowledge Chain , 2016 .

[95]  R. Schroeder,et al.  Relationships between implementation of TQM, JIT, and TPM and manufacturing performance , 2001 .

[96]  R. Evangelista,et al.  The economic impact of technological and organizational innovations. A firm-level analysis , 2010 .

[97]  Ana Abrunhosa,et al.  Are TQM principles supporting innovation in the Portuguese footwear industry , 2008 .

[98]  Ammon Salter,et al.  Investigating the sources of process innovation among UK manufacturing firms , 2006 .

[99]  Uma Kumar,et al.  Relationship between quality management practices and innovation , 2012 .

[100]  Roger G. Schroeder,et al.  Linking Work Design to Mass Customization: A Sociotechnical Systems Perspective , 2006, Decis. Sci..

[101]  Günther Schuh,et al.  LEAN INNOVATION–INTRODUCING VALUE SYSTEMS TO PRODUCT DEVELOPMENT , 2011 .

[102]  C. Fornell,et al.  Evaluating structural equation models with unobservable variables and measurement error. , 1981 .

[103]  Sachin Modgil,et al.  Total productive maintenance, total quality management and operational performance , 2016 .

[104]  F. Damanpour.  An Integration of Research Findings of Effects of Firm Size and Market Competition on Product and Process Innovations , 2010 .

[105]  H. Boer,et al.  The impact of quality management practices on innovation: an empirical research study of Brazilian manufacturing companies , 2020, Benchmarking: An International Journal.

[106]  D. A. Kenny,et al.  The moderator-mediator variable distinction in social psychological research: conceptual, strategic, and statistical considerations. , 1986, Journal of personality and social psychology.

[107]  Nishikant Mishra,et al.  An integrated lean and green approach for improving sustainability performance: a case study of a packaging manufacturing SME in the U.K. , 2019, Production Planning & Control.

[108]  Santosh B. Rane,et al.  Prediction and improvement of iron casting quality through analytics and Six Sigma approach , 2019, International Journal of Lean Six Sigma.

[109]  Samer Eid Dahiyat,et al.  Lean management and innovation performance , 2019, Management Research Review.

[110]  Kit Fai Pun,et al.  Exploring soft versus hard factors for TQM implementation in small and medium‐sized enterprises , 2006 .

[111]  Kurt A. Heppard,et al.  An empirical test of environmental, organizational, and process factors affecting incremental and radical innovation , 2003 .

[112]  Fariborz Damanpour,et al.  The Adoption of Technological, Administrative, and Ancillary Innovations: Impact of Organizational Factors , 1987 .

[113]  Bernardo Nicoletti,et al.  Optimizing Innovation with the Lean and Digitize Innovation Process , 2015 .

[114]  Max Allway,et al.  Shifting to lean service: Stealing a page from manufacturers' playbooks , 2002 .

[115]  Li-An Ho,et al.  Meditation, learning, organizational innovation and performance , 2011, Ind. Manag. Data Syst..

[116]  Marina Apaydin,et al.  A Multi-Dimensional Framework of Organizational Innovation: A Systematic Review of the Literature , 2010 .