Drag models, solids concentration and velocity distribution in a stirred tank

Drag force influences both the particle suspension and solids concentration distribution in a stirred tank. The influence of drag models on the prediction of solids suspension in a tank stirred by a hydrofoil impeller was studied in the present work using computational fluid dynamics (CFD) and experimental techniques. A comparison was made between the drag models based on Reynolds number only and those that take solid volume fraction into account or those that account for the effect of the free stream turbulence. One of the drag models investigated was a function of the energy dissipation rate, and therefore, the influence of the methods of determining the energy dissipation rate on the prediction of solids suspension was investigated. It was shown that a better agreement between the CFD simulation and experimental results can be obtained using drag models based on solids volume fraction than those that are based on Reynolds number only.

[1]  Franco Magelli,et al.  Solids Settling Velocity and Distribution in Slurry Reactors with Dilute Pseudoplastic Suspensions , 2001 .

[2]  Y. Sato,et al.  Liquid velocity distribution in two-phase bubble flow , 1975 .

[3]  Donald A. Drew,et al.  The analysis of two-phase flow and heat transfer using a multidimensional, four field, two-fluid model , 2001 .

[4]  František Rieger,et al.  Suspension of Solid Particles , 1994 .

[5]  G. K. Patterson,et al.  Laser-Doppler measurements of turbulent-flow parameters in a stirred mixer , 1989 .

[6]  A. Barresi,et al.  Solid dispersion in an agitated vessel , 1987 .

[7]  Ochieng Aoyi.  A hydrodynamic study of nickel suspension in stirred tanks , 2005 .

[8]  M. Nocentini,et al.  Solid distribution in vessels stirred with multiple impellers , 1990 .

[9]  M. Bertodano.  Two fluid model for two-phase turbulent jets , 1998 .

[10]  G. Micale,et al.  Experiments and CFD predictions of solid particle distribution in a vessel agitated with four pitched blade turbines , 2001 .

[11]  Franco Magelli,et al.  Solids concentration profiles in a mechanically stirred and staged column slurry reactor , 1985 .

[12]  Alfons Mersmann,et al.  Theoretical prediction of the minimum stirrer speed in mechanically agitated suspensions , 1998 .

[13]  D. Pinelli,et al.  Scale-up criteria for the solids distribution in slurry reactors stirred with multiple impellers , 2003 .

[14]  A. Brucato,et al.  Particle drag coefficients in turbulent fluids , 1998 .

[15]  J. Derksen.  Numerical Simulation of Solids Suspension in a Stirred Tank , 2003 .

[16]  A. Ochieng,et al.  Nickel solids concentration distribution in a stirred tank , 2006 .

[17]  G. Evans,et al.  Numerical modelling of gas-liquid flow in stirred tanks , 2005 .