Computational Fluid Dynamics Modeling for the Design of Large Primary Settling Tanks

Settling tanks are used to remove solids at wastewater treatment plants. Many numerical models have been proposed to simulate the settling process and to improve tank efficiency. In this research, a three-dimensional (3D) numerical model is developed to simulate large primary settling tanks. In the proposed model, the non-Newtonian properties of the sludge flow in the settling tank are described by a Bingham plastic rheological model. To eliminate the singularity inherited in the rheological model, a modified constitutive relation is used in both the yielded and unyielded regions. Hindered settling of particles in the settling tank is also modeled. Tracer study, where a massless scalar is injected and transported, is done to investigate the tank’s residence time. This numerical model is used to improve the design of the primary settling tanks, which will be built in Chicago. The Metropolitan Water Reclamation District of Greater Chicago (MWRDGC) is in the process of building new preliminary treatment faci...

[1]  Bruce A. DeVantier,et al.  Modeling Sediment‐Induced Density Currents in Sedimentation Basins , 1988 .

[2]  John A. McCorquodale,et al.  Secondary clarifier analysis using data from the Clarifier Research Technical Committee protocol , 1997 .

[3]  A. Gosman,et al.  Solution of the implicitly discretised reacting flow equations by operator-splitting , 1986 .

[4]  Peter Krebs.  Success and shortcomings of clarifier modelling , 1995 .

[5]  Xin Huang,et al.  A Herschel–Bulkley model for mud flow down a slope , 1998, Journal of Fluid Mechanics.

[6]  Bruce E. Larock,et al.  Particle Concentration Predictions in Settling Basins , 1983 .

[7]  John A. McCorquodale,et al.  MODELLING OF FLOW IN RECTANGULAR SEDIMENTATION TANKS BY AN EXPLICIT THIRD‐ORDER UPWINDING TECHNIQUE , 1997 .

[8]  F. Colin,et al.  Settling velocity model of activated sludge , 1993 .

[9]  Bruce A. DeVantier,et al.  Modelling a recirculating density-driven turbulent flow , 1986 .

[10]  Jerzy J. Ganczarczyk,et al.  Stroboscopic determination of settling velocity, size and porosity of activated sludge flocs , 1987 .

[11]  Scott A. Wells,et al.  Numerical model of sedimentation/thickening with inertial effects , 1999 .

[12]  Jiri Marsalek,et al.  Modelling of flocculation and transport of cohesive sediment from an on-stream stormwater detention pond. , 2002, Water research.

[13]  Bruce A. DeVantier,et al.  Sediment transport in stratified turbulent flow , 1983 .

[14]  R. Dick,et al.  The rheology of activated sludge. , 1967, Journal - Water Pollution Control Federation.

[15]  Ben Koopman,et al.  One-Dimensional Clarifier Model with Sludge Blanket Heights , 1996 .

[16]  Francesco Pirozzi,et al.  A generalized settling approach in the numerical modeling of sedimentation tanks , 1998 .

[17]  P. Bradshaw,et al.  Turbulence Models and Their Application in Hydraulics. By W. RODI. International Association for Hydraulic Research, Delft, 1980. Paperback US $15. , 1983, Journal of Fluid Mechanics.

[18]  Anastasios I. Stamou,et al.  On the prediction of flow and mixing in settling tanks using a curvature-modified k-ϵ model , 1991 .

[19]  Hrvoje Jasak,et al.  A tensorial approach to computational continuum mechanics using object-oriented techniques , 1998 .

[20]  W. Rodi,et al.  Turbulence measurements in model settling tank , 1990 .

[21]  M. Ishii,et al.  One-dimensional drift-flux model and constitutive equations for relative motion between phases in various two-phase flow regimes , 2003 .

[22]  Yee-Chung Jin,et al.  Modeling of Class I Settling Tanks , 2000 .

[23]  T. Papanastasiou.  Flows of Materials with Yield , 1987 .

[24]  John A. McCorquodale,et al.  Modeling of Rectangular Settling Tanks , 1992 .

[25]  Wolfgang Rodi,et al.  Density Currents and Shear-Induced Flocculation in Sedimentation Tanks , 1992 .

[26]  Peter Krebs,et al.  Inlet-structure design for final clarifiers , 1995 .

[27]  I. Takács.  A dynamic model of the clarification-thickening process , 1991 .

[28]  Peter Krebs,et al.  Computing Shear Flow and Sludge Blanket in Secondary Clarifiers , 1999 .

[29]  C. Kranenburg,et al.  Effects of Gravity Currents in Circular Secondary Clarifiers , 1994 .

[30]  Wolfgang Rodi,et al.  Numerical modeling of flow and settling in primary rectangular clarifiers , 1989 .

[31]  Xin Huang,et al.  A perturbation solution for Bingham-plastic mudflows , 1997 .

[32]  René Dupont,et al.  A one-dimensional model for a secondary settling tank including density current and short-circuiting , 1995 .

[33]  Francisco Pedocchi,et al.  Evaluation of the LISST-ST instrument for suspended particle size distribution and settling velocity measurements , 2006 .