论文信息 - Influence of photoresist feature geometry on ECR plasma-etched HgCdTe trenches

Influence of photoresist feature geometry on ECR plasma-etched HgCdTe trenches

Factors that affect width and aspect ratio in electron cyclotron resonance (ECR) etched HgCdTe trenches are investigated. The ECR etch bias and anisotropy are determined by photoresist feature erosion rate. The physical characteristics of the trenches are attributed to ECR plasma etch chemistry.

[1] D. Chenault,et al. Antireflective structures in CdTe and CdZnTe surfaces by ECR plasma etching , 2001 .

[2] J. D. Benson,et al. Development of a high-selectivity process for electron cyclotron resonance plasma etching of II-VI semiconductors , 2002 .

[3] W. Moreau. Semiconductor Lithography: Principles, Practices, and Materials , 1987 .

[4] R. Dammel. Diazonaphthoquinone-based resists , 1993 .

[5] Andrew T. Hunter,et al. MBE growth of HgCdTe avalanche photodiode structures for low-noise 1.55 μm photodetection , 1999 .

[6] E. A. Patten,et al. Molecular beam epitaxial growth and performance of HgCdTe-based simultaneous-mode two-color detectors , 1998 .

[7] Nibir K. Dhar,et al. HgCdTe heteroepitaxy on three-inch (112) CdZnTe/Si: Ellipsometric control of substrate temperature , 2000 .

[8] M. Zandian,et al. A novel simultaneous unipolar multispectral integrated technology approach for HgCdTe IR detectors and focal plane arrays , 2001 .

[9] P. Lovecchio,et al. Optimization of dry etch process conditions for HgCdTe detector arrays , 1999 .

[10] Arnost Reiser,et al. Photoreactive Polymers: The Science and Technology of Resists , 1989 .