Experimental study on heat transfer and pressure drop characteristics of air–water two-phase flow with the effect of polyacrylamide additive in a horizontal circular tube
暂无分享,去创建一个
Xiang Zhang | Lei Liu | Qiuyue Guo | Ningsheng Zhang | Lixin Cheng | Lixin Cheng | Lei Liu | Ningsheng Zhang | Xiang Zhang | Q. Guo
[1] John R. Thome,et al. Two-phase flow patterns in U-bends and their contiguous straight tubes for different orientations, tube and bend diameters , 2012 .
[2] Josua P. Meyer,et al. Stratified flow model for convective condensation in an inclined tube , 2012 .
[3] D. Mowla,et al. Investigation of the effects of various parameters on pressure drop reduction in crude oil pipelines by drag reducing agents , 2012 .
[4] D. Mewes,et al. Drag Reduction with Surfactants and Polymeric Additives in Multiphase Flow , 2012 .
[5] A. Al-sarkhi. Effect of mixing on frictional loss reduction by drag reducing polymer in annular horizontal two-phase flows , 2012 .
[6] M. D. Paepe,et al. Two-phase flow behaviour and pressure drop of R134a in a smooth hairpin , 2012 .
[7] Josua P. Meyer,et al. Experimental study of convective condensation in an inclined smooth tube. Part I: Inclination effect on flow pattern and heat transfer coefficient , 2012 .
[8] Josua P. Meyer,et al. Experimental study of convective condensation in an inclined smooth tube. Part II : inclination effect on pressure drops and void fractions , 2012 .
[9] C. Thompson,et al. Non-Newtonian multi-phase flows: On drag reduction, pressure drop and liquid wall friction factor , 2011 .
[10] W. Ahmed,et al. Friction factor correlations for gas–liquid/liquid–liquid flows with drag-reducing polymers in horizontal pipes , 2011 .
[11] Jonathan Olivier,et al. Two-phase flow of refrigerants in 85 μm-wide multi-microchannels: Part II ― Heat transfer with 35 local heaters , 2011 .
[12] Jonathan Olivier,et al. Two-phase flow of refrigerants in 85 μm-wide multi-microchannels: Part I – Pressure drop , 2011 .
[13] S. Paras,et al. Liquid layer characteristics in gas–liquid flow in slightly inclined pipes: Effect of non-ionic surfactant additives , 2009 .
[14] J. Thome,et al. Cooling of microprocessors using flow boiling of CO2 in a micro-evaporator: Preliminary analysis and performance comparison , 2009 .
[15] John R. Thome,et al. Flow boiling in horizontal flattened tubes: Part I ― Two-phase frictional pressure drop results and model , 2009 .
[16] J. Thome,et al. Flow boiling in horizontal flattened tubes: Part II – Flow boiling heat transfer results and model , 2009 .
[17] John R. Thome,et al. Two-Phase Flow Patterns and Flow-Pattern Maps: Fundamentals and Applications , 2008 .
[18] J. Thome,et al. Nanofluid two-phase flow and thermal physics: a new research frontier of nanotechnology and its challenges. , 2008, Journal of nanoscience and nanotechnology.
[19] John R. Thome,et al. Flow boiling of ammonia and hydrocarbons: A state-of-the-art review , 2008 .
[20] J. Thome,et al. New Prediction Methods for CO2 Evaporation Inside Tubes: Part II - An Updated General Flow Boiling Heat Transfer Model Based on Flow Patterns , 2008 .
[21] J. Thome,et al. New prediction methods for CO2 evaporation inside tubes: Part I – A two-phase flow pattern map and a flow pattern based phenomenological model for two-phase flow frictional pressure drops , 2008 .
[22] Andrea Luke,et al. Boiling phenomena with surfactants and polymeric additives: A state-of-the-art review , 2007 .
[23] R. J. Wilkens,et al. Multiphase drag reduction: Effect of eliminating slugs , 2007 .
[24] Lixin Cheng,et al. Study of vapor liquid two-phase frictional pressure drop in a vertical heated spirally internally ribbed tube , 2007 .
[25] John R. Thome,et al. New flow boiling heat transfer model and flow pattern map for carbon dioxide evaporating inside horizontal tubes , 2006 .
[26] Lixin Cheng,et al. Enhanced Heat Transfer Characteristics of Upward Flow Boiling of Kerosene in a Vertical Spirally Internally Ribbed Tube , 2006 .
[27] Lixin Cheng,et al. Study of Single Phase Flow Heat Transfer and Friction Pressure Drop in a Spiral Internally Ribbed Tube , 2006 .
[28] D. Mowla,et al. Experimental study of drag reduction by a polymeric additive in slug two-phase flow of crude oil and air in horizontal pipes , 2006 .
[29] Dieter Mewes,et al. Review of two-phase flow and flow boiling of mixtures in small and mini channels , 2006 .
[30] R. J. Wilkens,et al. Surfactant Use for Slug Flow Pattern Suppression and New Flow Pattern Types in a Horizontal Pipe , 2006 .
[31] Lixin Cheng,et al. Experimental Study of Heat Transfer and Pressure Drop Characteristics of Air/Water and Air-Steam/Water Heat Exchange in a Polymer Compact Heat Exchanger , 2005 .
[32] Raj M. Manglik,et al. Nucleate pool boiling of aqueous polymer solutions on a cylindrical heater , 2005 .
[33] Abdelsalam Al-Sarkhi,et al. Effect of Drag Reducing Polymers on Two-Phase Gas–Liquid Flows in a Horizontal Pipe , 2004 .
[34] Arash Soleimani,et al. Effect of drag-reducing polymers on pseudo-slugs––interfacial drag and transition to slug flow , 2002 .
[35] Lixin Cheng,et al. Experimental study of CHF in a vertical spirally internally ribbed tube under the condition of high pressures , 2002 .
[36] Lixin Cheng,et al. Flow boiling heat transfer in a vertical spirally internally ribbed tube , 2001 .
[37] L. Chen,et al. STUDY OF FLOW BOILING HEAT TRANSFER IN A TUBE WITH AXIAL MICROGROOVES , 2001 .
[38] L. Chen,et al. Comparison of Six Typical Correlations for Upward Flow Boiling Heat Transfer with Kerosene in a Vertical Smooth Tube , 2000 .
[39] W. P. Jepson,et al. Effect of Drag-Reducing Agents in Multiphase Flow Pipelines , 1998 .
[40] J. L. Zakin,et al. Low-speed streaks in drag-reduced turbulent flow , 1997 .
[41] H. Ochs. Effects of relative humidity on the coalescence of small precipitation drops in free fall , 1996 .
[42] M. Kostic. On turbulent drag and heat transfer reduction phenomena and laminar heat transfer enhancement in non-circular duct flow of certain non-Newtonian fluids , 1994 .
[43] Jiri Myska,et al. Turbulence measurements of drag reducing surfactant systems , 1993 .
[44] A. Tsinober,et al. An investigation of possible mechanisms of heterogeneous drag reduction in pipe and channel flows , 1993 .
[45] R. Sellin,et al. Polymer “threads” and drag reduction , 1991 .
[46] W. G. Tiederman,et al. The mechanism of polymer thread drag reduction , 1991 .
[47] A. Ghajar,et al. A HEAT TRANSFER CORRELATION FOR VISCOELASTIC TURBULENT PIPE FLOWS , 1989 .
[48] H. Yoon,et al. Heat eddy diffusivity for viscoelastic turbulent pipe flows , 1987 .
[49] W. Rohsenow,et al. Handbook of Heat Transfer Fundamentals , 1985 .
[50] J. P. Brill,et al. Drag reduction in cocurrent horizontal natural gas‐hexane pipe flow , 1980 .
[51] J. P. Brill,et al. Drag reduction in two‐phase annular‐mist flow of air and water , 1976 .
[52] P. S. Virk. Drag reduction fundamentals , 1975 .
[53] K. Aziz,et al. A flow pattern map for gas—liquid flow in horizontal pipes , 1974 .
[54] R. G. Rosehart,et al. Gas-liqud slug flow with drag-reducing polymer solutions , 1972 .
[55] E. Greskovich,et al. Drag Reduction in Two-Phase Flows , 1971 .
[56] J. L. Zakin,et al. Effects of molecular characteristics of polymers on drag reduction , 1971 .
[57] S. J. Kline,et al. Describing Uncertainties in Single-Sample Experiments , 1953 .
[58] B. A. Toms,et al. Some Observations on the Flow of Linear Polymer Solutions Through Straight Tubes at Large Reynolds Numbers , 1948 .