Review of prognostic problem in condition-based maintenance

Prognostic is nowadays recognized as a key feature in maintenance strategies as it should allow avoiding inopportune maintenance spending. Real prognostic systems are however scarce in industry. That can be explained from different aspects, on of them being the difficulty of choosing an efficient technology: many approaches to support the prognostic process exist, whose applicability is highly dependent on industrial constraints. Thus, the general purpose of the paper is to explore the way of performing failure prognostics so that manager can act consequently. Different aspects of prognostic are discussed. The prognostic process is (re)defined and an overview of prognostic metrics is given. Following that, the “prognostic approaches” are described. The whole aims at giving an overview of the prognostic area, both from the academic and industrial points of views.

[1]  Noureddine Zerhouni,et al.  Framework for a distributed and hybrid prognostic system , 2007 .

[2]  Hoon Sohn,et al.  A Coupled Approach to Developing Damage Prognosis Solutions , 2003 .

[3]  Philip A. Scarf,et al.  On the application of a model of condition-based maintenance , 2000, J. Oper. Res. Soc..

[4]  Krishna R. Pattipati,et al.  An interacting multiple model approach to model-based prognostics , 2003, SMC'03 Conference Proceedings. 2003 IEEE International Conference on Systems, Man and Cybernetics. Conference Theme - System Security and Assurance (Cat. No.03CH37483).

[5]  Thiagalingam Kirubarajan,et al.  Statistical approach to prognostics , 2001, SPIE Defense + Commercial Sensing.

[6]  Jonathan S. Maltz,et al.  NEURAL NETWORKS FOR PNEUMATIC ACTUATOR FAULT DETECTION , 1999 .

[7]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[8]  Chiman Kwan,et al.  A novel approach to fault diagnostics and prognostics , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[9]  Frank L. Lewis,et al.  Intelligent Fault Diagnosis and Prognosis for Engineering Systems , 2006 .

[10]  Noureddine Zerhouni,et al.  Recurrent radial basis function network for time-series prediction , 2003 .

[11]  D. C. Swanson,et al.  A general prognostic tracking algorithm for predictive maintenance , 2001, 2001 IEEE Aerospace Conference Proceedings (Cat. No.01TH8542).

[12]  R. Ganesan,et al.  Multivariable Trend Analysis Using Neural Networks for Intelligent Diagnostics of Rotating Machinery , 1997 .

[13]  Joseph Mathew,et al.  Rotating machinery prognostics. State of the art, challenges and opportunities , 2009 .

[14]  Kenneth A. Loparo,et al.  Physically based diagnosis and prognosis of cracked rotor shafts , 2002, SPIE Defense + Commercial Sensing.

[15]  David Chelidze,et al.  Multimode damage tracking and failure prognosis in electromechanical systems , 2002, SPIE Defense + Commercial Sensing.

[16]  Ratna Babu Chinnam,et al.  A neuro-fuzzy approach for estimating mean residual life in condition-based maintenance systems , 2004 .

[17]  P. J. Vlok,et al.  Utilising statistical residual life estimates of bearings to quantify the influence of preventive maintenance actions , 2004 .

[18]  M.J. Roemer,et al.  Prognostic enhancements to diagnostic systems for improved condition-based maintenance [military aircraft] , 2002, Proceedings, IEEE Aerospace Conference.

[19]  Jay Lee,et al.  A prognostic algorithm for machine performance assessment and its application , 2004 .

[20]  George Vachtsevanos,et al.  Fault prognosis using dynamic wavelet neural networks , 2001, 2001 IEEE Autotestcon Proceedings. IEEE Systems Readiness Technology Conference. (Cat. No.01CH37237).

[21]  K. Pattipati,et al.  Model-based Prognostic Techniques , 2003 .

[22]  Steven Y. Liang,et al.  Adaptive Prognostics for Rolling Element Bearing Condition , 1999 .

[23]  M. Farid Golnaraghi,et al.  Prognosis of machine health condition using neuro-fuzzy systems , 2004 .

[24]  Kun Yang,et al.  A combining condition prediction model and its application in power plant , 2004, Proceedings of 2004 International Conference on Machine Learning and Cybernetics (IEEE Cat. No.04EX826).

[25]  Asok Ray,et al.  Stochastic modeling of fatigue crack dynamics for on-line failure prognostics , 1996, IEEE Trans. Control. Syst. Technol..

[26]  Wenyi Wang.  Toward dynamic model-based prognostics for transmission gears , 2002, SPIE Defense + Commercial Sensing.

[27]  Wenbin Wang,et al.  A model to predict the residual life of rolling element bearings given monitored condition information to date , 2002 .

[28]  Joseph P. Cusumano,et al.  A Dynamical Systems Approach to Failure Prognosis , 2004 .

[29]  K. Goebel,et al.  Prognostic information fusion for constant load systems , 2005, 2005 7th International Conference on Information Fusion.

[30]  Douglas E. Adams,et al.  Nonlinear damage models for diagnosis and prognosis in structural dynamic systems , 2002, SPIE Defense + Commercial Sensing.

[31]  Wenyi Wang,et al.  Autoregressive Model-Based Gear Fault Diagnosis , 2002 .

[32]  Noureddine Zerhouni,et al.  Adaptive Neuro-Fuzzy Inference System for mid term prognostic error stabilization. , 2008 .

[33]  Filippo Emanuele Ciarapica,et al.  Managing the condition-based maintenance of a combined-cycle power plant : An approach using soft computing techniques , 2006 .

[34]  V. Makis,et al.  Recursive filters for a partially observable system subject to random failure , 2003, Advances in Applied Probability.

[35]  H. G. Natke,et al.  A PASSIVE DIAGNOSTIC EXPERIMENT WITH ERGODIC PROPERTIES , 1997 .

[36]  Stephen J. Engel,et al.  Prognostics, the real issues involved with predicting life remaining , 2000, 2000 IEEE Aerospace Conference. Proceedings (Cat. No.00TH8484).

[37]  B. J. Roylance,et al.  Plant machinery working life prediction method utilizing reliability and condition-monitoring data , 2000 .

[38]  Richard C.M. Yam,et al.  Intelligent Predictive Decision Support System for Condition-Based Maintenance , 2001 .

[39]  M. S. Lebold,et al.  Hybrid reasoning for prognostic learning in CBM systems , 2001, 2001 IEEE Aerospace Conference Proceedings (Cat. No.01TH8542).

[40]  Michael J. Roemer,et al.  Predicting remaining life by fusing the physics of failure modeling with diagnostics , 2004 .

[41]  Viliam Makis,et al.  Filters and parameter estimation for a partially observable system subject to random failure with continuous-range observations , 2004, Advances in Applied Probability.

[42]  Rune Brincker,et al.  Vibration Based Inspection of Civil Engineering Structures , 1993 .

[43]  Steven Y. Liang,et al.  Damage mechanics approach for bearing lifetime prognostics , 2002 .

[44]  Steven Y. Liang,et al.  STOCHASTIC PROGNOSTICS FOR ROLLING ELEMENT BEARINGS , 2000 .

[45]  Ratna Babu Chinnam,et al.  Autonomous diagnostics and prognostics through competitive learning driven HMM-based clustering , 2003, Proceedings of the International Joint Conference on Neural Networks, 2003..

[46]  Radoslaw Zimroz,et al.  Vibration condition monitoring of planetary gearbox under varying external load , 2009 .

[47]  Peng Wang,et al.  Fault prognostics using dynamic wavelet neural networks , 2001, Artificial Intelligence for Engineering Design, Analysis and Manufacturing.

[48]  Czesław Cempel,et al.  Simple condition forecasting techniques in vibroacoustical diagnostics , 1987 .