Investigations Into the Influence of Weld Zone on Formability of Fiber Laser-Welded Advanced High Strength Steel

In this study, two different dual phase steel grades DP980 and DP600, and IFHS steel sheets were laser welded by a 2-kW fiber laser. The weld quality of these three different LWBs was assessed with the help of microstructure, micro-hardness and transverse tensile tests. Tensile testing of longitudinal and miniature samples was performed to evaluate the mechanical properties of the weld zone. Formability of parent materials and LWBs were assessed in bi-axial stretch forming condition by Erichsen cupping test. To validate the weld zone properties, 3-D finite element models of Erichsen cupping test of LWBs was developed, and the failures in the deformed cups were predicted using two theoretical forming limit diagrams. It was observed that hardness of the fusion zone and HAZ in laser welded DP600 and IFHS steels was more compared to the respective parent metal. However, 29% reduction in hardness was observed at the outer HAZ of DP980 steel weldments due to tempering of martensite. Reduction of formability was observed for all the LWBs with two distinct failure patterns, and the maximum reduction in formability was observed in the case of DP980 LWBs. The presence of the soft zone is detrimental in forming of welded DP steels.

[1]  D. R. Kumar,et al.  Experimental and numerical studies on the forming behavior of tailor welded steel sheets in biaxial stretch forming , 2010 .

[2]  S. Bhole,et al.  Formability and Fatigue Behavior of Tailor (Laser) Welded Blanks for Automotive Applications , 2006 .

[3]  Robert John Lark,et al.  The use of tailored blanks in the manufacture of construction components , 2001 .

[4]  H. Shakeri,et al.  Study of damage initiation and fracture in aluminum tailor welded blanks made via different welding techniques , 2002 .

[5]  R. Hill.  The mathematical theory of plasticity , 1950 .

[6]  Z. Sheng.  Formability of tailor-welded strips and progressive forming test , 2008 .

[7]  Formability analysis of extra-deep drawing steel , 2002 .

[8]  Xin Sun,et al.  Quasi-static and dynamic responses of advanced high strength steels: Experiments and modeling , 2012 .

[9]  Taylan Altan,et al.  Deep drawing of round cups from tailor-welded blanks , 1995 .

[10]  S. Panda,et al.  Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets , 2009 .

[11]  C. L. Chow,et al.  Forming Limit Analysis of Sheet Metals Based on a Generalized Deformation Theory , 2003 .

[12]  Jian Cao,et al.  A novel forming technology for tailor-welded blanks , 2000 .

[13]  W. Hosford,et al.  Metal Forming: Mechanics and Metallurgy , 1993 .

[14]  Mats Ericsson,et al.  Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG , 2003 .

[15]  D. Bhattacharya,et al.  Metallurgical Perspectives on Advanced Sheet Steels for Automotive Applications , 2011 .

[16]  J. Huetink,et al.  Deep drawing simulations of Tailored Blanks and experimental verification , 1998 .

[17]  E. Bayraktar,et al.  Effect of welding conditions on the formability characteristics of thin sheet steels: Mechanical and metallurgical effects , 2006 .

[18]  Deng Ju,et al.  Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet , 2000 .

[19]  Tai-chiu Lee,et al.  Tailor-welded blanks of different thickness ratios effects on forming limit diagrams ☆ , 2003 .

[20]  Robert M. Caddell,et al.  Metal Forming: Contents , 2007 .

[21]  E. Bayraktar,et al.  Grain growth mechanism during the welding of interstitial free (IF) steels , 2007 .

[22]  D. R. Kumar,et al.  Characterization of tensile properties of tailor welded IF steel sheets and their formability in stretch forming , 2007 .

[23]  M. Xia,et al.  Effect of Laser Welding on Formability of DP980 steel , 2008 .

[24]  Luen Chow Chan,et al.  Formability and Weld Zone Analysis of Tailor-Welded Blanks for Various Thickness Ratios , 2005 .

[25]  Youngmoo Heo,et al.  Characteristics of weld line movements for the deep drawing with drawbeads of tailor-welded blanks , 2001 .

[26]  Y. Zhou,et al.  Effects of Heat Input and Martensite on HAZ Softening in Laser Welding of Dual Phase Steels , 2008 .

[27]  Amit Gupta,et al.  Formability of galvanized interstitial-free steel sheets , 2006 .

[28]  Eurico Assunção,et al.  Comparative study of laser welding in tailor blanks for the automotive industry , 2010 .

[29]  U. Reisgen,et al.  Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets , 2010 .

[30]  N. Yurioka,et al.  A chart method to determine necessary preheat in steel welding , 1995 .

[31]  P. Wild,et al.  On modeling of the weld line in finite element analyses of tailor-welded blank forming operations , 2004 .

[32]  Y. Zhou,et al.  A Comparative Study of Formability of Diode Laser Welds in DP980 and HSLA Steels , 2007 .

[33]  Pal Molian,et al.  Yb:YAG laser welding of TRIP780 steel with dual phase and mild steels for use in tailor welded blanks , 2009 .

[34]  J. Jeswiet,et al.  Tensile testing for weld deformation properties in similar gage tailor welded blanks using the rule of mixtures , 2001 .

[35]  M. Abbasi,et al.  New attempt to wrinkling behavior analysis of tailor welded blanks during the deep drawing process , 2012 .

[36]  B. Kaftanoglu,et al.  Determination of coefficient of friction under conditions of deep-drawing and stretch forming , 1973 .

[37]  Kalyan Kumar Ray,et al.  Strength assessment of spot-welded sheets of interstitial free steels , 2009 .

[38]  F. Schmidt-Kaler,et al.  Concept of deterministic single ion doping with sub-nm spatial resolution , 2005, cond-mat/0508756.

[39]  C. Horvath.  Advanced steels for lightweight automotive structures , 2021, Materials, Design and Manufacturing for Lightweight Vehicles.

[40]  Luen Chow Chan,et al.  True stress-strain analysis on weldment of heterogeneous tailor-welded blanks - a novel approach for forming simulation , 2007 .