Nonlinear Response of a Weakly Damaged Metal Sample: A Dissipative Modulation Mechanism of Vibro-Acoustic Interaction

The nonlinear vibro-acoustic response of solid samples containing quite a small amount of defects can be anomalously high in magnitude compared to the case of undamaged intact solids. Functional de pendencies of the nonlinear effects exhibit rather interesting behavior. In this paper, experimental results on nonlinearity-induced cross-modulation of a high-frequency (HF) f = 15 — 30 kHz signal by a low-frequency (LF) F = 20 - 60 Hz vibration in an aluminum plate with a small single crack are reported. Comparison with a reference sample (the identical plate without a crack) has proven that the presence of such a small defect can be easily detected due to its nonlinear manifestations. It is demonstrated that under proper choice of the sounding signal parameters, the effect level can be so pronounced that the amplitude of the modulation side-lobes originated due to the nonlinearity exceeds the amplitude of the fundamental harmonic of the HF signal. Main functional features of the observed phenomena are analyzed, and a new physical explana tion is suggested based on a dissipative mechanism of vibro-acoustic interaction. Results of the numerical simulation of the effect are also presented.