Effect of recycled brick powder with various particle features on early-age hydration, water state, and rheological properties of blended cement paste in the context of 3D Printing

[1]  N. Banthia,et al.  Clarifying and quantifying the driving force for the evolution of static yield stress of cement pastes , 2023, Cement and Concrete Research.

[2]  Yamei Zhang,et al.  Pore structure, internal relative humidity, and fiber orientation of 3D printed concrete with polypropylene fiber and their relation with shrinkage , 2022, Journal of Building Engineering.

[3]  Zhicong Deng,et al.  Printability and pore structure of 3D printing low carbon concrete using recycled clay brick powder with various particle features , 2022, Journal of Sustainable Cement-Based Materials.

[4]  A. Boukhari,et al.  Rheology, calorimetry and electrical conductivity related-properties for monitoring the dissolution and precipitation process of cement-fly ash mixtures , 2022, Powder Technology.

[5]  V. Mechtcherine,et al.  The realities of additively manufactured concrete structures in practice , 2022, Cement and Concrete Research.

[6]  N. Banthia,et al.  Relaxation characteristics and state evolution of water during the early-age reaction of alkali-activated slag as monitored by low field nuclear magnetic resonance , 2022, Composites Part B: Engineering.

[7]  N. Banthia,et al.  Influence of HPMC and SF on buildability of 3D printing foam concrete: From water state and flocculation point of view , 2022, Composites Part B: Engineering.

[8]  Ashish Soni,et al.  Challenges and opportunities of utilizing municipal solid waste as alternative building materials for sustainable development goals: A review , 2022, Sustainable Chemistry and Pharmacy.

[9]  V. Mechtcherine,et al.  Comparison between methods for indirect assessment of buildability in fresh 3D printed mortar and concrete , 2022, Cement and Concrete Research.

[10]  Jianzhuang Xiao,et al.  Effect of spiral blade geometry on 3D-printed concrete rheological properties and extrudability using discrete event modeling , 2022, Automation in Construction.

[11]  A. Zidanšek,et al.  Challenges and opportunities of terahertz technology in construction and demolition waste management. , 2022, Journal of environmental management.

[12]  T. Ding,et al.  Buildability Prediction of 3D–Printed Concrete at Early-ages: A Numerical Study with Drucker–Prager Model , 2022, Additive Manufacturing.

[13]  Tao Meng,et al.  Effect of brick aggregate on failure process of mixed recycled aggregate concrete via X-CT , 2022, Construction and Building Materials.

[14]  R. He,et al.  Water distribution and transport-kinetics model in fresh cement-based mixtures containing superabsorbent polymers based on 1H low-field NMR , 2022, Cement and Concrete Composites.

[15]  V. Mechtcherine,et al.  Systematical investigation of rheological performance regarding 3D printing process for alkali-activated materials: Effect of precursor nature , 2022, Cement and Concrete Composites.

[16]  N. Neithalath,et al.  A comprehensive analysis of buildability of 3D-printed concrete and the use of bi-linear stress-strain criterion-based failure curves towards their prediction , 2022, Cement and Concrete Composites.

[17]  Jian Hui Lim,et al.  Extrudable region parametrical study of 3D printable concrete using recycled glass concrete , 2022, Journal of Building Engineering.

[18]  N. Roussel,et al.  Filament geometry control in extrusion-based additive manufacturing of concrete: The good, the bad and the ugly , 2021, Cement and Concrete Research.

[19]  My Ngoc-Tra Lam,et al.  Potential use of clay brick waste powder and ceramic waste aggregate in mortar , 2021, Construction and Building Materials.

[20]  Baoju Liu,et al.  Autogenous shrinkage and nano-mechanical properties of UHPC containing waste brick powder derived from construction and demolition waste , 2021, Construction and Building Materials.

[21]  A. Kashani,et al.  Shrinkage behavior of cementitious 3D printing materials: Effect of temperature and relative humidity , 2021, Cement and Concrete Composites.

[22]  W. Yao,et al.  Investigation of hydration and setting process in nanosilica-cement blended pastes: In situ characterization using low field nuclear magnetic resonance , 2021 .

[23]  G. de Schutter,et al.  3D printable concrete with natural and recycled coarse aggregates: Rheological, mechanical and shrinkage behaviour , 2021, Cement and Concrete Composites.

[24]  Jiyang Fu,et al.  Surface properties of clay brick powder and its influence on hydration and strength development of cement paste , 2021 .

[25]  N. Banthia,et al.  Influence of hydroxypropyl methylcellulose and silica fume on stability, rheological properties, and printability of 3D printing foam concrete , 2021 .

[26]  V. Mechtcherine,et al.  Mix design concepts for 3D printable concrete: A review , 2021 .

[27]  T. Ding,et al.  Large-scale 3D printing concrete technology: Current status and future opportunities , 2021 .

[28]  Chen Guo,et al.  The calculations of pore structure parameters from gas adsorption experiments of shales: Which models are better? , 2021 .

[29]  Liping Guo,et al.  Preparation and characterization of ultra-high-strength and ultra-high-ductility cementitious composites incorporating waste clay brick powder , 2021, Journal of Cleaner Production.

[30]  J. Van Der Putten,et al.  Early age shrinkage phenomena of 3D printed cementitious materials with superabsorbent polymers , 2021 .

[31]  Xiaoyan Hu,et al.  Study on the structural build-up of cement-ground limestone pastes and its micro-mechanism , 2020 .

[32]  Jacques Kruger,et al.  Plastic shrinkage cracking in 3D printed concrete , 2020 .

[33]  Marcelo Tramontin Souza,et al.  3D printed concrete for large-scale buildings: An overview of rheology, printing parameters, chemical admixtures, reinforcements, and economic and environmental prospects , 2020 .

[34]  Bo Yang,et al.  An efficient model for predicting setting time of cement based on broad learning system , 2020, Appl. Soft Comput..

[35]  Zhiming Ma,et al.  The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: A critical review , 2020 .

[36]  Zhiming Ma,et al.  Mechanical properties and water absorption of cement composites with various fineness and contents of waste brick powder from C&D waste , 2020 .

[37]  Kun Zhang,et al.  Nanoscale pore structure heterogeneity and its quantitative characterization in Chang7 lacustrine shale of the southeastern Ordos Basin, China , 2020 .

[38]  B. Portnov,et al.  Estimating the effectiveness of different environmental law enforcement policies on illegal C&D waste dumping in Israel. , 2019, Waste management.

[39]  K. Scrivener,et al.  Advances in understanding cement hydration mechanisms , 2019, Cement and Concrete Research.

[40]  Ming Jen Tan,et al.  Printability region for 3D concrete printing using slump and slump flow test , 2019, Composites Part B: Engineering.

[41]  Xuemei Chen,et al.  Study on the pozzolanic reaction of clay brick powder in blended cement pastes , 2019, Construction and Building Materials.

[42]  M. Stefanidou,et al.  Application of an alternative way for silica fume dispersion in cement pastes without ultrasonication , 2019, Cement and Concrete Research.

[43]  P. Rovnaník,et al.  Rheological properties and microstructure of binary waste red brick powder/metakaolin geopolymer , 2018, Construction and Building Materials.

[44]  M. Climent,et al.  Long-term effects of waste brick powder addition in the microstructure and service properties of mortars , 2018, Construction and Building Materials.

[45]  Ye Qian,et al.  Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE) , 2018, Cement and Concrete Research.

[46]  Bryan T. Adey,et al.  Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall , 2018, Automation in Construction.

[47]  Yiqun Guo,et al.  Effects of SCMs particles on the compressive strength of micro-structurally designed cement paste: Inherent characteristic effect, particle size refinement effect, and hydration effect , 2018 .

[48]  D. Lowke.  Thixotropy of SCC—A model describing the effect of particle packing and superplasticizer adsorption on thixotropic structural build-up of the mortar phase based on interparticle interactions , 2018 .

[49]  Q. Yuan,et al.  Effect of mineral admixtures on the structural build-up of cement paste , 2018 .

[50]  Caijun Shi,et al.  Effect of constituents on rheological properties of fresh concrete-A review , 2017 .

[51]  A. Yahia,et al.  Physico-chemical kinetics of structural build-up of neat cement-based suspensions , 2017 .

[52]  R. Ferron,et al.  The role of particle size on the performance of pumice as a supplementary cementitious material , 2017 .

[53]  Zheng-wu Jiang,et al.  Study on utilization of red brick waste powder in the production of cement-based red decorative plaster for walls , 2016 .

[54]  T. Ding,et al.  Reclamation chain of waste concrete: A case study of Shanghai. , 2016, Waste management.

[55]  Rami Khatib,et al.  How do concrete rheology, tribology, flow rate and pipe radius influence pumping pressure? , 2016 .

[56]  G. Wang,et al.  Effects of micro-mesopore structure characteristics on methane adsorption capacity of medium rank coal , 2023, Fuel.

[57]  Xuemei Chen,et al.  The particle-size effect of waste clay brick powder on its pozzolanic activity and properties of blended cement , 2020 .

[58]  J. Ramesh,et al.  EXPERIMENTAL ANALYSIS ON PARTIAL REPLACEMENT OF CEMENT WITH BRICK POWDER IN CONCRETE , 2017 .

[59]  Philippe Coussot,et al.  Steady state flow of cement suspensions: A micromechanical state of the art , 2010 .