An integrated design for hybrid combined cooling, heating and power system with compressed air energy storage

The inherent characteristics of renewable energy, such as highly random fluctuation and anti-peak, are essential issues that impede optimal design of a combined cooling, heating and power (CCHP) system. This study presents a novel hybrid CCHP system integrated with compressed air energy storage (CAES). The operation mode of the new system is enriched by the trigeneration characteristic of CAES when compared with a traditional CCHP system. Additionally, an integrated design method based on a tri-level collaborative optimization strategy is proposed for the new scheme. An active storing strategy is introduced to maximize the utility of the superiority of CAES for peak sheaving and efficiency increase. Thus, a novel algorithm based on a hybrid algorithm of Non-Dominated Sorting Genetic Algorithm-II and Multi-Objective Particle Swarm Optimization is employed to solve the multi-objective optimization model with the aim of minimizing the total cost and emissions. A case study shows the effectiveness of the above methods. The implementation of the study fundamentally improves the overall energy utilization degree and the ability for renewable consumption to thereby provide a guiding principle for CCHP system design.

[1]  François Maréchal,et al.  Thermo-economic optimization of a combined cooling, heating and power system based on small-scale compressed air energy storage , 2016 .

[2]  Guo Li,et al.  A two-stage optimal planning and design method for combined cooling, heat and power microgrid system , 2013 .

[3]  Yiping Dai,et al.  Energy efficiency analysis and off-design analysis of two different discharge modes for compressed air energy storage system using axial turbines , 2016 .

[4]  Chenghui Zhang,et al.  Multi-objective optimal operation and energy coupling analysis of combined cooling and heating system , 2016 .

[5]  Ziyad M. Salameh,et al.  Methodology for optimally sizing the combination of a battery bank and PV array in a wind/PV hybrid system , 1996 .

[6]  Pedro J. Mago,et al.  Analysis and optimization of CCHP systems based on energy, economical, and environmental considerations , 2009 .

[7]  Fernando Sebastián,et al.  Assessment of CCHP systems based on biomass combustion for small-scale applications through a review of the technology and analysis of energy efficiency parameters , 2013 .

[8]  Majid Gandomkar,et al.  Environmental/economic scheduling of a micro-grid with renewable energy resources , 2015 .

[9]  Yanjun Dai,et al.  Energy matching and optimization analysis of waste to energy CCHP (combined cooling, heating and power) system with exergy and energy level , 2015 .

[10]  Hongguang Jin,et al.  Full chain energy performance for a combined cooling, heating and power system running with methanol and solar energy , 2013 .

[11]  Mohammad Reza Alizadeh Pahlavani,et al.  Cascaded multilevel converter based superconducting magnetic energy storage system for frequency control , 2014 .

[12]  Nan Li,et al.  Optimal design and operation strategy for integrated evaluation of CCHP (combined cooling heating and power) system , 2016 .

[13]  Wei-Jen Lee,et al.  A bi-level program for the planning of an islanded microgrid including CAES , 2016, 2015 IEEE Industry Applications Society Annual Meeting.

[14]  Anastasios G. Bakirtzis,et al.  Design of a stand alone system with renewable energy sources using trade off methods , 1992 .

[15]  Sau Man Lai,et al.  Integration of trigeneration system and thermal storage under demand uncertainties , 2010 .

[16]  Dacheng Li,et al.  A trigeneration system based on compressed air and thermal energy storage , 2012 .

[17]  Yiping Dai,et al.  Capacity allocation of a hybrid energy storage system for power system peak shaving at high wind power penetration level , 2015 .

[18]  Jianzhong Xu,et al.  The thermodynamic effect of thermal energy storage on compressed air energy storage system , 2013 .

[19]  Ali Keshavarz,et al.  Designing an optimal solar collector (orientation, type and size) for a hybrid-CCHP system in different climates , 2015 .

[20]  Yuan Zhou,et al.  Design and engineering implementation of non-supplementary fired compressed air energy storage system: TICC-500 , 2015 .

[21]  Zhiqiang Zhai,et al.  Particle swarm optimization for redundant building cooling heating and power system , 2010 .

[22]  Hailong Li,et al.  Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES) , 2014 .

[23]  Ke Yang,et al.  The thermodynamic effect of air storage chamber model on Advanced Adiabatic Compressed Air Energy Storage System , 2013 .

[24]  Zhao Yang Dong,et al.  Optimal operation of DES/CCHP based regional multi-energy prosumer with demand response , 2016 .

[25]  François Maréchal,et al.  Multi-objective optimization and exergoeconomic analysis of a combined cooling, heating and power based compressed air energy storage system , 2017 .

[26]  Mohammad Norouzi,et al.  Mixed integer programming of multi-objective security-constrained hydro/thermal unit commitment , 2014 .

[27]  Jinyue Yan,et al.  Annual performance analysis and comparison of pellet production integrated with an existing combined heat and power plant. , 2011, Bioresource technology.

[28]  Nelson Fumo,et al.  Analysis of combined cooling, heating, and power systems based on source primary energy consumption , 2010 .

[29]  Chiang Hsiaodong,et al.  Impact of Energy Storage System on the Unit Commitment Problem with Volatile Wind Power , 2011 .

[30]  Luisa F. Cabeza,et al.  Advances in energy storage research and development : The 12th International Conference on Energy Storage Innostock 2012 , 2013 .

[31]  Michael C. Georgiadis,et al.  A two-stage stochastic programming model for the optimal design of distributed energy systems , 2013 .

[32]  Andrea De Pascale,et al.  Guidelines for residential micro-CHP systems design , 2012 .

[33]  Vladimir Strezov,et al.  Assessment of utility energy storage options for increased renewable energy penetration , 2012 .

[34]  C. Y. Zheng,et al.  Impacts of feed-in tariff policies on design and performance of CCHP system in different climate zones , 2016 .

[35]  Jin-Long Liu,et al.  A comparative research of two adiabatic compressed air energy storage systems , 2016 .

[36]  Teuku Meurah Indra Mahlia,et al.  A review of available methods and development on energy storage; technology update , 2014 .

[37]  Yang Shi,et al.  Combined cooling, heating and power systems: A survey , 2014 .

[38]  Ke Yang,et al.  Theoretical evaluation on the impact of heat exchanger in Advanced Adiabatic Compressed Air Energy Storage system , 2014 .