Concrete Structures Strengthened with near Surface Mounted Reinforcement of CFRP

The need of maintenance, repair and upgrading of concrete structures has increased considerably over the last decade and will most likely continue to do so. There can be several reasons for this, but it can often be attributed to normal change of use, increased demands on the structure, errors in the design and/or construction phase or in the worst case, accidents. Different methods have been developed over the years for solving different rehabilitation problems. Recently, advanced composites used for external bonding in the form of fabrics or laminates have become an accepted method. Several thousands of objects around the world have been upgraded with advanced composites bonded to its surface. In most cases, this method is very competitive regarding both structural behaviour and economy, but there are also some drawbacks. The surface bonded composite material is relatively sensitive to fire, accidents or vandalism. In addition, the pre-treatment is relatively intensive and time consuming. However, if the composite material is placed in slots in the concrete cover some of these drawbacks can be overcome. This paper presents work carried out on near surface mounted reinforcement (NSMR) at Luleå University of Technology in Sweden.