Coupled experimental-numerical framework for the assessment of strain capacity of flawed girth welds in pipelines

[1]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[2]  Rudi Denys,et al.  Strain capacity prediction for strain-based pipeline designs , 2013 .

[3]  Rudi Denys,et al.  Constraint analysis of curved wide plate specimens , 2012 .

[4]  Rudi Denys,et al.  Pressure Correction Factor for Strain Capacity Predictions Based on Curved Wide Plate Testing , 2012 .

[5]  Stijn Hertelé,et al.  Curved Wide Plate Testing With Advanced Instrumentation and Interpretation , 2012 .

[6]  Rudi Denys,et al.  Comparison of Pipeline Girth Weld Defect Acceptance at the Onset of Yielding According to CSA Z662 and EPRG Guidelines , 2012 .

[7]  Stijn Hertelé,et al.  Resonant Bending Fatigue Test Setup for Pipes With Optical Displacement Measuring System , 2012 .

[8]  Rudi Denys,et al.  Parametric finite element model for large scale tension tests on flawed pipeline girth welds , 2012, Adv. Eng. Softw..

[9]  Rudi Denys,et al.  Full-range stress–strain behaviour of contemporary pipeline steels: Part I. Model description , 2012 .

[10]  Rudi Denys,et al.  Full-range stress-strain behaviour of contemporary pipeline steels: part II: estimation of model parameters , 2012 .

[11]  Minh-Quy Le,et al.  Material characterization by instrumented spherical indentation , 2012 .

[12]  Rudi Denys,et al.  Measurement of ductile crack extension in single edge notch tensile specimens , 2012 .

[13]  Andrew H. Sherry,et al.  An engineering assessment methodology for non-sharp defects in steel structures – Part I: Procedure development , 2012 .

[14]  Stijn Hertelé.  Proceedings of the 4th Conference on Sustainable Construction and Design , 2012 .

[15]  Stijn Hertelé,et al.  Validation of a finite element model for fracture mechanics specimens , 2012 .

[16]  Stijn Hertelé,et al.  Characterization of mechanical properties in weld metal using inverse modelling , 2012 .

[17]  Rudi Denys,et al.  Justification of the mapping approach for finite element modelling of ductile tearing , 2012 .

[18]  Rudi Denys,et al.  Influence and evaluation of constraint on fracture toughness in pipeline research , 2012 .

[19]  S. Hertelé,et al.  Sensitivity of Plastic Response of Defective Pipeline Girth Welds to the Stress-Strain Behavior of Base and Weld Metal , 2013 .

[20]  Julian de Freitas Hallai,et al.  On the effect of Lüders bands on the bending of steel tubes , 2011 .

[21]  Fumiyoshi Minami,et al.  Constraint-Based Assessment of CTOD Toughness Requirement For High-Strain Line Pipe , 2011 .

[22]  Rudi Denys,et al.  Development of an analytical reference stress equation for inner-diameter defected curved plates in tension , 2011 .

[23]  Rudi Denys,et al.  A generic stress–strain model for metallic materials with two-stage strain hardening behaviour , 2011 .

[24]  Reinhilde Jacobs,et al.  Are panoramic images reliable in planning sinus augmentation procedures? , 2011, Clinical oral implants research.

[25]  Ning Ma,et al.  Strain Aging of C-Mn Line Pipe Steels: An Analytical Approach to Compare Strain Aging Heat Treatments , 2011 .

[26]  Wim De Waele,et al.  Gekoppeld experimenteel-numeriek onderzoek naar de vervormingscapaciteit van pijpsecties met omtrekslasfout , 2011 .

[27]  Mario L. Macia,et al.  A Multi-Tiered Procedure For Engineering Critical Assessment of Strain-Based Pipelines , 2011 .

[28]  Rudi Denys,et al.  Evaluation of strength mismatch by FE Analysis and DIC measurements on cross weld tensile specimens , 2011 .

[29]  Rudi Denys,et al.  Analytical validation of crack driving force calculations for defects in plates and pipes under tension , 2011 .

[30]  Rudi Denys,et al.  Design of a (mini) wide plate specimen for strain-based weld integrity assessment , 2011 .

[31]  Stijn Hertelé,et al.  DEVELOPMENT AND VALIDATION OF A HIGH CONSTRAINT MODIFIED BOUNDARY LAYER FINITE ELEMENT MODEL , 2011 .

[32]  Rudi Denys,et al.  IMPLEMENTATION OF AN UNLOADING COMPLIANCE PROCEDURE FOR MEASUREMENT OF CRACK GROWTH IN PIPELINE STEEL , 2011 .

[33]  Stijn Hertelé,et al.  VALIDATION OF A WIDE PLATE FINITE ELEMENT MODEL USING DIGITAL IMAGE CORRELATION , 2011 .

[34]  Jacques Besson,et al.  A combined phenomenological model for the representation of anisotropic hardening behavior in high strength steel line pipes , 2010 .

[35]  Nikzad Nourpanah,et al.  Development of a reference strain approach for assessment of fracture response of reeled pipelines , 2010 .

[36]  Henning Schütte,et al.  On curved crack paths in finite strain fracture mechanics , 2010 .

[37]  Mahmud Ashraf,et al.  Elevated temperature material properties of stainless steel alloys , 2010 .

[38]  Bård Nyhus,et al.  Effect of residual stresses on ductile crack growth resistance , 2010 .

[39]  Yang Li,et al.  Study on Tensile Property and Strain Ageing Behavior of X100 Linepipe , 2010 .

[40]  Rudi Denys,et al.  Longitudinal strain capacity of GMAW welded high niobium (HTP) grade X80 steel pipes , 2010 .

[41]  Jeffrey W. Sowards,et al.  SE(T) Testing of Pipeline Welds , 2010 .

[42]  Rudi Denys,et al.  Strain capacity of weak and strong girth welds in axially loaded pipelines , 2010 .

[43]  Do-Jun Shim,et al.  Why Conduct SEN(T) Tests and Considerations in Conducting/Analyzing SEN(T) Testing , 2010 .

[44]  Rudi Denys,et al.  Determination of full range stress-strain behavior of pipeline steels using tensile characteristics , 2010 .

[45]  Rudi Denys,et al.  Investigation of Pipe Strain Measurements in a Curved Wide Plate Specimen , 2010 .

[46]  Rudi Denys,et al.  Limit Load and Reference Stress for Curved Wide Plates , 2010 .

[47]  Rudi Denys,et al.  EVALUATION OF PIPE BENDING REFERENCE STRESS EQUATIONS , 2010 .

[48]  Stijn Hertelé,et al.  INTERPRETATION OF STRESS-STRAIN CURVE IN PIPELINE RESEARCH , 2010 .

[49]  Mustafa,et al.  Structural Integrity of Welded Structures: Process - Property - Performance (3P) Relationship , 2010 .

[50]  Stijn Hertelé.  Development of a strain-based flaw assessment method for defective pipeline girth welds , 2010 .

[51]  Bård Nyhus,et al.  Effects of crack depth and specimen size on ductile crack growth of SENT and SENB specimens for fracture mechanics evaluation of pipeline steels , 2009 .

[52]  Xin Wang,et al.  Two-parameter characterization of elastic–plastic crack front fields: Surface cracked plates under tensile loading , 2009 .

[53]  Eiji Tsuru,et al.  Anisotropic strain aging behavior of high strength UOE linepipes , 2009 .

[54]  Takuya Hara,et al.  Metallurgical Design And Development of High Deformable High Strength Line Pipe Suitable For Strain-Based Design , 2009 .

[55]  W. Cheng,et al.  Development of a Physics-based Approach For the Prediction of Strain Capacity of Welded Pipelines , 2009 .

[56]  Rudi Denys,et al.  Numerical evaluation of the CMOD of defects in pipeline girth welds under remote plastic deformation , 2009 .

[57]  James A. Gianetto,et al.  Measurement of J-R Curves Using Single-Specimen Technique On Clamped SE(T) Specimens , 2009 .

[58]  Rudi Denys,et al.  Failure characterisation of a girth weld with a surface-breaking flaw under tensile load , 2009 .

[59]  C. Donne,et al.  Fracture and damage mechanics modelling of thin-walled structures – An overview , 2009 .

[60]  Mark Stephens,et al.  An Experimental Basis For Improved Strain-based Design Models , 2009 .

[61]  Stijn Hertelé,et al.  Parametric model for evaluating the performance of threaded pipe connections , 2009 .

[62]  Rudi Denys,et al.  Estimate of Y/T ratio and uniform elongation capacity of pipeline steels from yield strength , 2009 .

[63]  Rudi Denys,et al.  A new stress-strain model for linepipe steels in strain-based design , 2009 .

[64]  Rudi Denys,et al.  Full range stress-strain relation modeling of pipeline steels , 2009 .

[65]  Rudi Denys,et al.  UGENT GUIDELINES FOR CURVED WIDE PLATE TESTING , 2009 .

[66]  Nenad Gubeljak,et al.  Yield load solutions of heterogeneous welded joints , 2008 .

[67]  Jin-Guang Teng,et al.  Three-Stage Full-Range Stress-Strain Model for Stainless Steels , 2008 .

[68]  Karel Minnaar,et al.  Recent Advances In Curved Wide Plate Testing And Implications For Strain-Based Design , 2008 .

[69]  Stelios Kyriakides,et al.  Localization and propagation of curvature under pure bending in steel tubes with Lüders bands , 2008 .

[70]  Jacques Besson,et al.  Plastic and damage behaviour of a high strength X100 pipeline steel: Experiments and modelling , 2008 .

[71]  Akio Yamamoto,et al.  Specification and Manufacturing of Pipes for the X100 Operational Trial , 2008 .

[72]  Volker Schwinn,et al.  Concepts of Grade X100 For High Toughness And Strain Based Design Application , 2008 .

[73]  Woo-Hyun Song,et al.  Development of X100 Linepipe Steel With High Deformation Capacity , 2008 .

[74]  Shigeru Endo,et al.  Mass Production and Installation of X100 Linepipe for Strain-Based Design Application , 2008 .

[75]  Nobuyuki Ishikawa,et al.  Effect of Crack Geometry And Tensile Properties On Tensile Strain Limit of X80 Linepipe , 2008 .

[76]  Gianluca Mannucci,et al.  Advanced Tensile Behaviour Evaluation of Girth Welds , 2008 .

[77]  Eiji Tsuru,et al.  Numerical Simulation of Buckling Resistance For UOE Line Pipes With Orthogonal Anisotropic Hardening Behavior , 2008 .

[78]  Takuya Hara,et al.  Metallurgical Design and Development of High Deformable X100 Line Pipe Steels Suitable for Strain-Based Design , 2008 .

[79]  G. Sastry,et al.  Work-Hardening Behavior of the Ni-Fe Based Superalloy IN718 , 2008 .

[80]  Michael S. Weir,et al.  Strain-Based Pipelines: Design Consideration Overview , 2008 .

[81]  Chuanjing Zhuang,et al.  Key Issues in the Specification of High Strain Line Pipe Used in Strain-Based Designed Districts of the 2nd West to East Pipeline , 2008 .

[82]  Akio Yamamoto,et al.  Property of X80 Grade SAW Pipes for Resistance to Ground Movement , 2008 .

[83]  J. Hutchinson,et al.  Modification of the Gurson Model for shear failure , 2008 .

[84]  Y. Lei,et al.  Use of local and global limit load solutions for plates with surface cracks under tension , 2007 .

[85]  Debashish Bhattacharjee,et al.  Effect of Martensite on the Mechanical Behavior of Ferrite–Bainite Dual Phase Steels , 2007 .

[86]  Bård Nyhus,et al.  A new approach to ductile tearing assessment of pipelines under large-scale yielding , 2007 .

[87]  Takuya Hara,et al.  Thermal Aging During Coating of X80 High Strength Steel For Line Pipe , 2007 .

[88]  Wan C. Kan,et al.  Predictive FEA Modeling of Pressurized Full-Scale Tests , 2007 .

[89]  Erling Østby.  Fracture Control – Offshore Pipelines JIP Proposal For Strain-based Fracture Assessment Procedure , 2007 .

[90]  Xiao Li,et al.  Key Issues Should Be Considered For Application of Strain-based Designed Pipeline In China , 2007 .

[91]  Eiji Tsuru,et al.  Development of A High Strength Steel Line Pipe For Strain-based Design Applications , 2007 .

[92]  Nobuhisa Suzuki,et al.  Tensile Strain Limits of X80 High-strain Pipelines , 2007 .

[93]  Eiji Tsuru,et al.  Methodology For Measurement of Mechanical Properties to Predict Collapse Pressure of UOE Pipes , 2007 .

[94]  Andreas Liessem,et al.  Strain Based Design—What the Contribution of a Pipe Manufacturer Can Be , 2007 .

[95]  J. Chattopadhyay,et al.  Improved J and COD estimation by GE/EPRI method in elastic to fully plastic transition zone , 2006 .

[96]  D.V.V. Satyanarayana,et al.  Correlation of structure and flow behaviour of Cu–Ti–Cd alloys , 2006 .

[97]  Xin Wang,et al.  Fully plastic J-integral solutions for surface cracked plates under biaxial loading , 2006 .

[98]  Mahmud Ashraf,et al.  Structural design for non-linear metallic materials , 2006 .

[99]  Kenzu Abdella.  Inversion of a full-range stress–strain relation for stainless steel alloys , 2006 .

[100]  Arthur Veldman,et al.  Proceedings of the 25th International Conference on Offshore Mechanics and Arctic Engineering, Vol 4 , 2006 .

[101]  Volker Schwinn,et al.  Manufacturing of X100 Pipes for the TAP Project , 2006 .

[102]  Ben Young,et al.  Stress–strain curves for stainless steel at elevated temperatures , 2006 .

[103]  K. G. Samuel,et al.  Limitations of Hollomon and Ludwigson stress–strain relations in assessing the strain hardening parameters , 2006 .

[104]  A. Liessem,et al.  Influence of thermal treatment on mechanical properties of UOE linepipe , 2005 .

[105]  David A. Nethercot,et al.  Experiments on stainless steel hollow sections—Part 1: Material and cross-sectional behaviour , 2004 .

[106]  Stelios Kyriakides,et al.  Bending of steel tubes with Lüders bands , 2004 .

[107]  Y. Lei.  J-integral and limit load analysis of semi-elliptical surface cracks in plates under tension , 2004 .

[108]  Y. Ling,et al.  Uniaxial True Stress-Strain after Necking , 2004 .

[109]  Claudio Ruggieri,et al.  A two-parameter framework to describe effects of constraint loss on cleavage fracture and implications for failure assessments of cracked components , 2003 .

[110]  I. Scheider,et al.  On the practical application of the cohesive model , 2003 .

[111]  W. Brocks,et al.  Simulation of cup cone fracture using the cohesive model , 2003 .

[112]  Gerold Hohl,et al.  The effect of specimen type on tensile test results and its implications for linepipe testing , 2003 .

[113]  Kim Rasmussen,et al.  Full-range stress–strain curves for stainless steelalloys , 2003 .

[114]  Christian Thaulow,et al.  A notched cross weld tensile testing method for determining true stress–strain curves for weldments , 2002 .

[115]  Rudi Denys,et al.  Material tensile properties in relation to the failure behaviour of girth welds subject to plastic longitudinal strains , 2002 .

[116]  Uwe Zerbst,et al.  Basic principles of analytical flaw assessment methods , 2000 .

[117]  Björn Brickstad,et al.  Crack shape developments for LBB applications , 2000 .

[118]  Federico Gutiérrez-Solana,et al.  Implications of the yield stress/tensile stress ratio to the SINTAP failure assessment diagrams for homogeneous materials , 2000 .

[119]  Stelios Kyriakides,et al.  On the Propagation of Lüders Bands in Steel Strips , 2000 .

[120]  Minoru Umemoto,et al.  Tensile stress-strain analysis of single-structure steels , 2000 .

[121]  E. Mirambell,et al.  On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation , 2000 .

[122]  Martin Macdonald,et al.  Mechanical Properties of Stainless Steel Lipped Channels , 2000 .

[123]  Thomas Siegmund,et al.  The Role of Cohesive Strength and Separation Energy for Modeling of Ductile Fracture , 2000 .

[124]  N. Gubeljak,et al.  Fracture behaviour of specimens with surface notch tip in the heat affected zone (HAZ) of strength mis-matched welded joints , 1999 .

[125]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[126]  M. M. K. Lee,et al.  J-estimation for semi-elliptical surface cracks in wide plates under direct tension , 1998 .

[127]  T. A. Netto,et al.  Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE , 1998 .

[128]  A. Cornec,et al.  Plastic stress-strain fields and limit loads of a plane strain cracked tensile panel with a mismatched welded joint , 1997 .

[129]  Ted Belytschko,et al.  On patterns of deformation in phase transformations and Lüders bands , 1996 .

[130]  M. Bergman,et al.  STRESS INTENSITY FACTORS FOR CIRCUMFERENTIAL SURFACE CRACKS IN PIPES , 1995 .

[131]  J. Simmons,et al.  Influence of nitride (Cr2N) precipitation on the plastic flow behavior of high-nitrogen austenitic stainless steel , 1995 .

[132]  Genki Yagawa,et al.  Three-dimensional fully plastic solutions for semi-elliptical surface cracks , 1993 .

[133]  Ram Avtar,et al.  Applicability of modified Crussard-Jaoul analysis on the deformation behaviour of dual-phase steels , 1987 .

[134]  A. Zahoor.  Closed Form Expressions for Fracture Mechanics Analysis of Cracked Pipes , 1985 .

[135]  Yoshiyuki Tomita,et al.  Tensile stress-strain analysis of cold worked metals and steels and dual-phase steels , 1985 .

[136]  Temperature. , 1985, Nursing times.

[137]  M. Atkinson,et al.  Strain hardening behavior of polycrystalline iron and low-carbon steels—A statistical analysis , 1984 .

[138]  Viggo Tvergaard,et al.  An analysis of ductile rupture in notched bars , 1984 .

[139]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .

[140]  V. Tvergaard.  Influence of voids on shear band instabilities under plane strain conditions , 1981 .

[141]  Pc Paris,et al.  Estimations on J-integral and tearing modulus T from a single specimen test record , 1981 .

[142]  R. McMeeking,et al.  On criteria for J-dominance of crack-tip fields in large-scale yielding , 1979 .

[143]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[144]  U. F. Kocks.  Laws for Work-Hardening and Low-Temperature Creep , 1976 .

[145]  H. J. Kleemola,et al.  On the strain-hardening parameters of metals , 1974 .

[146]  W. R. Cribb,et al.  Concerning the analysis of tensile stress-strain data using log dσ/dεp versus log σ diagrams , 1973 .

[147]  S. Monteiro,et al.  An empirical analysis of titanium stress-strain curves , 1973 .

[148]  K. Ono.  Strain-Hardening equations and uniform strain , 1972 .

[149]  D. C. Ludwigson,et al.  Modified stress-strain relation for FCC metals and alloys , 1971 .

[150]  Percy Williams Bridgman,et al.  Studies in large plastic flow and fracture , 1964 .

[151]  R. Stephenson.  A and V , 1962, The British journal of ophthalmology.

[152]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[153]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[154]  J. Meigs,et al.  WHO Technical Report , 1954, The Yale Journal of Biology and Medicine.

[155]  H. W. Swift.  Plastic instability under plane stress , 1952 .

[156]  Ch. Crussard,et al.  Contribution à l'étude de la forme des courbes de traction des métaux et à son interprétation physique , 1950 .

[157]  Kenneth Levenberg.  A METHOD FOR THE SOLUTION OF CERTAIN NON – LINEAR PROBLEMS IN LEAST SQUARES , 1944 .