Numerical simulation of induction vacuum deposition of titanium on steel plates

In this work, a numerical simulation of induction vacuum deposition of titanium on hardened steel samples was performed. The rational geometry of the tubular target and the induction heating modes, which ensure the minimum heating of the steel plate, were determined. The main results of simulation experimentally confirmed the possibility of creating conditions for the formation of titanium layers on the surfaces of steel plates.

[1]  A. Aman,et al.  Microwave emission from lead zirconate titanate induced by impulsive mechanical load , 2015 .

[2]  J. Legoux,et al.  Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings , 2013, Journal of thermal spray technology (Print).

[3]  A. Chayahara,et al.  TiN coating to three-dimensional materials by PBII using vacuum titanium arc plasma , 1999, IEEE Conference Record - Abstracts. 1999 IEEE International Conference on Plasma Science. 26th IEEE International Conference (Cat. No.99CH36297).

[4]  A. Fomin,et al.  The Effect of Microarc Oxidation on the Structure and Hardness of Aluminum-Oxide Coatings Formed by Plasma Spraying on Titanium , 2018, Protection of Metals and Physical Chemistry of Surfaces.

[5]  X. Deng,et al.  Preparation of graded porous titanium coatings on titanium implant materials by plasma spraying. , 2000, Journal of biomedical materials research.

[6]  Iain D. Boyd,et al.  Monte Carlo simulation of vapor transport in physical vapor deposition of titanium , 2000 .

[7]  A. F. Rezchikov,et al.  Iterative Method of Adjusting the Radius of the Spherical Probe of Mobile Coordinate-Measuring Machines When Monitoring a Rotation Surface , 2018, Measurement Techniques.

[8]  T. Clyne,et al.  Surface preparation of titanium for vacuum plasma spraying and its effect on substrate/coating interfacial fracture toughness , 1993 .

[9]  A. A. Lozovan,et al.  Formation of fractal structures during the pulsed laser deposition of titanium in vacuum , 2016 .

[10]  J. Guilemany,et al.  Study of Ti deposition onto Al alloy by cold gas spraying , 2010 .

[11]  A. I. Kovalenko,et al.  Detonation spraying of titanium and formation of coatings with spraying atmosphere-dependent phase composition , 2015 .

[12]  S. Kumar,et al.  Bonding features and associated mechanisms in kinetic sprayed titanium coatings , 2009 .

[13]  O. V. Zakharov,et al.  Experimental studies of ultrasonic stabilization of rings of rolling bearings , 2016 .

[14]  B. Jodoin,et al.  Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing , 2017, Journal of Thermal Spray Technology.

[15]  P. Shipway,et al.  Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy , 2006 .

[16]  Y. L. Jeyachandran,et al.  Properties of titanium thin films deposited by dc magnetron sputtering , 2006 .

[17]  A. M. Vilardell,et al.  Osteoblastic cell response on high-rough titanium coatings by cold spray , 2018, Journal of Materials Science: Materials in Medicine.

[18]  Hua Li,et al.  Nanostructural Characteristics of Vacuum Cold-Sprayed Hydroxyapatite/Graphene-Nanosheet Coatings for Biomedical Applications , 2014, Journal of Thermal Spray Technology.

[19]  M. Kaneta,et al.  Friction and wear properties of titanium films formed on aluminium by laser thermal spraying , 1992 .

[20]  S. Telegin,et al.  Development of the Combined Technology of Modification of the Surface of Titanium Implants by Laser Radiation with Subsequent Plasma Spraying of Biocompatible Coatings , 2019, Metallurgist.

[21]  Shao-li Chen,et al.  Densification of plasma-sprayed titanium and tantalum coatings , 1996 .

[22]  M. Gardon,et al.  Cold gas spray titanium coatings onto a biocompatible polymer , 2013 .

[23]  S. Telegin,et al.  Laser Modification of the Surface of Titanium: Technology, Properties, and Prospects of Application , 2019, Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques.

[24]  P. H. Shipway,et al.  Corrosion Performance of Laser Posttreated Cold Sprayed Titanium Coatings , 2011 .

[25]  N. Huang,et al.  Titanium Film Deposition by High-Power Impulse Magnetron Sputtering : Influence of Pulse Duration , 2011, PST 2011.

[26]  J. Legoux,et al.  Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings , 2010, International Thermal Spray Conference.

[27]  S. Kumekov,et al.  Studying the composition and structure of films obtained by thermal oxidation of copper , 2017, Glass Physics and Chemistry.

[28]  Marc Schmidt,et al.  Microwave Sensor for Mechanical Stress Measurement Based on Ferroelectric Graphene Nanosheet Composites , 2014 .

[29]  Stefan Palis,et al.  Narrow Band Solid-Liquid Composite Arrangements: Alternative Solutions for Phononic Crystal-Based Liquid Sensors , 2019, Sensors.

[30]  P. Shipway,et al.  Corrosion Behavior of Cold Sprayed Titanium Coatings and Free Standing Deposits , 2011 .

[31]  M. Boulos.  RF induction plasma spraying: State-of-the-art review , 1992 .

[32]  A. Fomin,et al.  Composition, structure and mechanical properties of metal oxide coatings produced on titanium using plasma spraying and modified by micro-arc oxidation , 2018 .

[33]  Alexey Iakovlev,et al.  Laser surface modification of ZnO for solar converters , 2017, LASE.