论文信息 - Improvement of Dynamic Characteristics of Digitally Controlled Switching Power Converter

Improvement of Dynamic Characteristics of Digitally Controlled Switching Power Converter

This paper presents the dynamic characteristics of the switching dc-dc power converter using the digital PID control method, FIR filter method and IIR filter method, and then the design criterion to improve the dynamic characteristics is discussed. As a result, it is seen in the simulation and experimental results that 11 R filter method has superior transient response and suppressed oscillation deriving from limit cycle. The undershoot is less than 200 mV and the transient time is less than 0.4 ms. This result suggests the design criterion of digitally controlled switching dc-dc power converter.

F. Kurokawa | W. Okamoto

[1] H. Matsuo,et al. 1 MHz high-speed digitally controlled dc-dc converter , 2003, The 25th International Telecommunications Energy Conference, 2003. INTELEC '03..

[2] Fujio Kurokawa,et al. Output characteristics of DC-DC converter with DSP control , 2002, 24th Annual International Telecommunications Energy Conference.

[3] John Y. Hung,et al. PID controller modifications to improve steady-state performance of digital controllers for buck and boost converters , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).

[4] Fujio Kurokawa,et al. 1MHz High-Speed Digitally Controlled DC-DC Converter( the 25th International Telecommunications Energy Conference(INTELEC'03)) , 2004 .

[5] Fujio Kurokawa,et al. Novel Digital Controller with Static Model Reference for Switching DC-DC Power Converters , 2005, IEICE Trans. Commun..

[6] Hirofumi Matsuo,et al. A comparison of steady‐state characteristics of buck‐type DC‐DC converter using DSP , 2007 .

[7] John Thompson,et al. Digital Signal Processing: Concepts and Applications , 1999 .