Electrode for proton exchange membrane fuel cells: A review

[1]  M. A. Zulkifley,et al.  A review of high-temperature proton exchange membrane fuel cell (HT-PEMFC) system , 2017 .

[2]  M. A. Haque,et al.  Acid doped polybenzimidazoles based membrane electrode assembly for high temperature proton exchange membrane fuel cell: A review , 2017 .

[3]  Mashallah Rezakazemi,et al.  Hybrid systems: Combining membrane and absorption technologies leads to more efficient acid gases (CO2 and H2S) removal from natural gas , 2017 .

[4]  Rui Lin,et al.  Experimental study of variable operating parameters effects on overall PEMFC performance and spatial performance distribution , 2016 .

[5]  Zhien Zhang,et al.  Comparisons of various absorbent effects on carbon dioxide capture in membrane gas absorption (MGA) process , 2016 .

[6]  Jintae Kim,et al.  Durability of high temperature polymer electrolyte membrane fuel cells in daily based start/stop operation mode using reformed gas , 2015 .

[7]  Søren Knudsen Kær,et al.  Analysis of accelerated degradation of a HT-PEM fuel cell caused by cell reversal in fuel starvation condition , 2015 .

[8]  J. Garche,et al.  Applications of Fuel Cell Technology: Status and Perspectives , 2015 .

[9]  G. Colditz.  The Sage encyclopedia of cancer and society , 2015 .

[10]  Tony Thampan,et al.  Development and evaluation of portable and wearable fuel cells for soldier use , 2014 .

[11]  D. Rohendi,et al.  Effect of PTFE Content and Sintering Temperature on the Properties of a Fuel Cell Electrode Backing Layer , 2014 .

[12]  Huicui Chen,et al.  Main factors affecting the lifetime of Proton Exchange Membrane fuel cells in vehicle applications: A review , 2014 .

[13]  Stylianos G. Neophytides,et al.  The role of phosphoric acid in the anodic electrocatalytic layer in high temperature PEM fuel cells , 2013, Journal of Applied Electrochemistry.

[14]  B. Pollet,et al.  Optimization of gas diffusion electrode for polybenzimidazole-based high temperature proton exchange membrane fuel cell: Evaluation of polymer binders in catalyst layer , 2013 .

[15]  D. Rohendi,et al.  Characterization of electrodes and performance tests on MEAs with varying platinum content and under various operational conditions , 2013 .

[16]  S. Lee,et al.  A review on experimental evaluation of water management in a polymer electrolyte fuel cell using X-ray imaging technique , 2013 .

[17]  Xianguo Li,et al.  Effective transport properties for polymer electrolyte membrane fuel cells – With a focus on the gas diffusion layer , 2013 .

[18]  A. Aricò,et al.  An electro-kinetic study of oxygen reduction in polymer electrolyte fuel cells at intermediate temperatures , 2013 .

[19]  I. Kruusenberg,et al.  Electrocatalysis of oxygen reduction on nitrogen-containing multi-walled carbon nanotube modified glassy carbon electrodes , 2013 .

[20]  R. Parthiban,et al.  Investigation of Flow Mal-distribution in Proton Exchange Membrane Fuel Cell Stack , 2012 .

[21]  B. Pollet,et al.  Catalyst loading for Pt-nanowire thin film electrodes in PEFCs , 2012 .

[22]  M. Ellis,et al.  Experimental characterization of the water transport properties of PEM fuel cells diffusion media , 2012 .

[23]  D. Wilkinson,et al.  Anode water removal and cathode gas diffusion layer flooding in a proton exchange membrane fuel cell , 2012 .

[24]  Hui Li,et al.  Current mapping of a proton exchange membrane fuel cell with a segmented current collector during the gas starvation and shutdown processes , 2012 .

[25]  Arunachala Mada Kannan,et al.  Characterization techniques for gas diffusion layers for proton exchange membrane fuel cells: A review , 2012 .

[26]  B. Pollet,et al.  Support materials for PEMFC and DMFC electrocatalysts—A review , 2012 .

[27]  Yi Yu,et al.  A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: Causes, consequences, and mitigation strategies , 2012 .

[28]  Carmen M. Rangel,et al.  Characterization of MEA degradation for an open air cathode PEM fuel cell , 2012 .

[29]  Jong-Won Lee,et al.  A review of gas diffusion layer in PEM fuel cells: Materials and designs , 2012 .

[30]  Suk Woo Nam,et al.  Development of a galvanostatic analysis technique as an in-situ diagnostic tool for PEMFC single cells and stacks , 2012 .

[31]  M. Ger,et al.  Analysis of the characterization of water produced from proton exchange membrane fuel cell (PEMFC) under different operating thermal conditions , 2012 .

[32]  B. Vinayan,et al.  Catalytic activity of platinum–cobalt alloy nanoparticles decorated functionalized multiwalled carbon nanotubes for oxygen reduction reaction in PEMFC , 2012 .

[33]  Liejin Guo,et al.  Dynamic characteristics of local current densities and temperatures in proton exchange membrane fuel cells during reactant starvations , 2012 .

[34]  Supaporn Therdthianwong,et al.  Cathode catalyst layer design for proton exchange membrane fuel cells , 2012 .

[35]  Changpeng Liu,et al.  The function of hydrophobic cathodic backing layers for high energy passive direct methanol fuel cel , 2011 .

[36]  Xiao-Zi Yuan,et al.  A review of accelerated conditioning for a polymer electrolyte membrane fuel cell , 2011 .

[37]  Hui Li,et al.  A review of polymer electrolyte membrane fuel cell durability test protocols , 2011 .

[38]  Chien-Kung Lin,et al.  Effect of PTFE content in gas diffusion layer based on Nafion®/PTFE membrane for low humidity proton exchange membrane fuel cell , 2011 .

[39]  Giovanni Dotelli,et al.  Investigation of gas diffusion layer compression by electrochemical impedance spectroscopy on runnin , 2011 .

[40]  R. Rocheleau,et al.  Systematic study of back pressure and anode stoichiometry effects on spatial PEMFC performance distribution , 2011 .

[41]  A. Asnafi,et al.  Analytic parameter identification of proton exchange membrane fuel cell catalyst layer using electro , 2011 .

[42]  J. H. Zhang,et al.  Effect and siting of Nafion in a Pt/C proton exchange membrane fuel cell catalyst , 2011 .

[43]  Vesna Colbow,et al.  Effects of crossover hydrogen on platinum dissolution and agglomeration , 2011 .

[44]  Natarajan Rajalakshmi,et al.  Electrochemical impedance diagnosis of micro porous layer in polymer electrolyte membrane fuel cell electrodes , 2011 .

[45]  Hui Li.  PEM Fuel Cell Diagnostic Tools , 2011 .

[46]  Sung-Chul Yi,et al.  Optimal catalyst layer structure of polymer electrolyte membrane fuel cell , 2011 .

[47]  Søren Knudsen Kær,et al.  High temperature PEM fuel cell performance characterisation with CO and CO2 using electrochemical impedance spectroscopy , 2011 .

[48]  Eunsook Lee,et al.  Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas di , 2011 .

[49]  K. Scott,et al.  Analysis of high temperature polymer electrolyte membrane fuel cell electrodes using electrochemical impedance spectroscopy , 2011 .

[50]  Xianguo Li,et al.  Water transport in polymer electrolyte membrane fuel cells , 2011 .

[51]  Rafael Nogueira Bonifácio,et al.  Catalyst layer optimization by surface tension control during ink formulation of membrane electrode , 2011 .

[52]  P. Zhou,et al.  Effect of nonuniformity of the contact pressure distribution on the electrical contact resistance in , 2011 .

[53]  Mehrdad Saif,et al.  PEM fuel cell low flow FDI , 2011 .

[54]  Jae Kwang Lee,et al.  Preparation of cost―effective Pt―Co electrodes by pulse electrodeposition for PEMFC electrocatalysts , 2011 .

[55]  P. Haridoss,et al.  Differences in structure and property of carbon paper and carbon cloth diffusion media and their impact on proton exchange membrane fuel cell flow field design , 2011 .

[56]  S. Çelebi,et al.  Carbon nanofiber growth on carbon paper for proton exchange membrane fuel cells , 2011 .

[57]  Branko N. Popov,et al.  Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance , 2011 .

[58]  Hongtan Liu,et al.  Effects of the difference in electrical resistance under the land and channel in a PEM fuel cell , 2011 .

[59]  A. Tamayol,et al.  Water permeation through gas diffusion layers of proton exchange membrane fuel cells , 2011 .

[60]  Chin-Hsiang Cheng,et al.  Effects of porosity gradient in gas diffusion layers on performance of proton exchange membrane fuel cells , 2010 .

[61]  D. Ingham,et al.  Effect of polytetrafluoroethylene-treatment and microporous layer-coating on the in-plane permeability of gas diffusion layers used in proton exchange membrane fuel cells , 2010 .

[62]  S. Liao,et al.  High performance membrane electrode assembly with ultra-low platinum loading prepared by a novel multi catalyst layer technique , 2010 .

[63]  P. Garcia-Ybarra,et al.  High platinum utilization in ultra-low Pt loaded PEM fuel cell cathodes prepared by electrospraying , 2010 .

[64]  S. Kocha,et al.  Examination of the activity and durability of PEMFC catalysts in liquid electrolytes , 2010 .

[65]  S. Asghari,et al.  Study of PEM fuel cell performance by electrochemical impedance spectroscopy , 2010 .

[66]  Xianguo Li,et al.  Experimental investigations on liquid water removal from the gas diffusion layer by reactant flow in a PEM fuel cell , 2010 .

[67]  W. Yan,et al.  Single-step fabrication of ABPBI-based GDE and study of its MEA characteristics for high-temperature PEM fuel cells , 2010 .

[68]  S. Grigoriev,et al.  The performance and degradation of Pt electrocatalysts on novel carbon carriers for PEMFC applications , 2010 .

[69]  Yun Wang,et al.  Multi-layer configuration for the cathode electrode of polymer electrolyte fuel cell , 2010 .

[70]  C. V. Rao,et al.  High temperature polymer electrolyte membrane fuel cell performance of PtxCoy/C cathodes , 2010 .

[71]  Dai-jun Yang,et al.  Effect of metal particle size and Nafion content on performance of MEA using Ir-V/C as anode catalyst , 2010 .

[72]  Raghunathan Rengaswamy,et al.  Performance analysis of a PEM fuel cell cathode with multiple catalyst layers , 2010 .

[73]  Toshiaki Konomi,et al.  Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells , 2010 .

[74]  Y. S. Yun,et al.  Porous carbon nanotube electrodes supported by natural polymeric membranes for PEMFC , 2010 .

[75]  Chung-Jen Tseng,et al.  Effects of microstructure characteristics of gas diffusion layer and microporous layer on the performance of PEMFC , 2010 .

[76]  Hsiharng Yang,et al.  Carbon cloth based on PAN carbon fiber practicability for PEMFC applications , 2010 .

[77]  Horng-Wen Wu,et al.  Effect of the prominent catalyst layer surface on reactant gas transport and cell performance at the cathodic side of a PEMFC , 2010 .

[78]  B. Yi,et al.  A new hydrophobic thin film catalyst layer for PEMFC , 2010 .

[79]  F. Dorado,et al.  Real-time implementation of a sliding mode controller for air supply on a PEM fuel cell , 2010 .

[80]  T. Lim,et al.  The effects of Nafion® ionomer content in PEMFC MEAs prepared by a catalyst-coated membrane (CCM) spraying method , 2010 .

[81]  M. Thommes,et al.  Effect of carbon paper substrate of the gas diffusion layer on the performance of proton exchange membrane fuel cell , 2010 .

[82]  N. Nguyen,et al.  Effects of hydrophobicity of the cathode catalyst layer on the performance of a PEM fuel cell , 2010 .

[83]  S. Liao,et al.  Performance of an ultra-low platinum loading membrane electrode assembly prepared by a novel catalyst-sprayed membrane technique , 2010 .

[84]  Pablo Cañizares,et al.  Study of the influence of the amount of PBI–H3PO4 in the catalytic layer of a high temperature PEMFC , 2010 .

[85]  Zidong Wei,et al.  Durability study of Pt–Pd/C as PEMFC cathode catalyst , 2010 .

[86]  Mathias Schulze,et al.  A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells , 2009 .

[87]  Dai-jun Yang,et al.  A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells , 2009 .

[88]  Marco Badami,et al.  Performance analysis of an innovative small-scale trigeneration plant with liquid desiccant cooling system , 2009 .

[89]  Djordje P. Saponjic,et al.  Non-noble metal catalyst for a future Pt free PEMFC , 2009 .

[90]  E. Chinarro,et al.  Pt–Ru–Co catalysts for PEMFC synthesized by combustion , 2009 .

[91]  Yuh-Shan Ho,et al.  Gas diffusion layer for proton exchange membrane fuel cells—A review , 2009 .

[92]  D. Candusso,et al.  A review on polymer electrolyte membrane fuel cell catalyst degradation and starvation issues: Causes, consequences and diagnostic for mitigation , 2009 .

[93]  Narissara Bussayajarn,et al.  Planar air breathing PEMFC with self-humidifying MEA and open cathode geometry design for portable applications , 2009 .

[94]  Alexey Serov,et al.  Review of non-platinum anode catalysts for DMFC and PEMFC application , 2009 .

[95]  U. Stimming,et al.  Analysis of the diffusive mass transport in the anode side porous backing layer of a direct methanol fuel cell , 2009 .

[96]  Tse-Hao Ko,et al.  Effect of hydrophobic gas diffusion layers on the performance of the polymer exchange membrane fuel cell , 2009 .

[97]  C. Roth,et al.  A novel electrocatalyst support with proton conductive properties for polymer electrolyte membrane fuel cell applications , 2009 .

[98]  Junsheng Zheng,et al.  Carbon-supported Ir–V nanoparticle as novel platinum-free anodic catalysts in proton exchange membrane fuel cell , 2009 .

[99]  Abu Bakar Mohamad,et al.  Fabrication of gas diffusion layer based on x–y robotic spraying technique for proton exchange membrane fuel cell application , 2009 .

[100]  Antonio J. Martín,et al.  PEMFC electrode preparation by electrospray: Optimization of catalyst load and ionomer content , 2009 .

[101]  P. Achard,et al.  Highly porous PEM fuel cell cathodes based on low density carbon aerogels as Pt-support: Experimental study of the mass-transport losses , 2009 .

[102]  W. Lehnert,et al.  Characterization of water transport in gas diffusion media , 2009 .

[103]  Aimy Bazylak,et al.  Liquid water visualization in PEM fuel cells: A review , 2009 .

[104]  Geping Yin,et al.  Durability studies on performance degradation of Pt/C catalysts of proton exchange membrane fuel cell , 2009 .

[105]  I. Eroglu,et al.  Effects of sulfonated polyether-etherketone (SPEEK) and composite membranes on the proton exchange membrane fuel cell (PEMFC) performance , 2009 .

[106]  Jin Hyun Nam,et al.  Microporous layer for water morphology control in PEMFC , 2009 .

[107]  S. Kandlikar,et al.  Thermal management issues in a PEMFC stack – A brief review of current status , 2009 .

[108]  E. Antolini.  Carbon supports for low-temperature fuel cell catalysts , 2009 .

[109]  N. Nguyen,et al.  Anti-flooding cathode catalyst layer for high performance PEM fuel cell , 2009 .

[110]  F. Shieu,et al.  Characterization of Teflon-like carbon cloth prepared by plasma surface modification for use as gas diffusion backing in membrane electrode assembly , 2009 .

[111]  C. Du,et al.  Hierarchy carbon paper for the gas diffusion layer of proton exchange membrane fuel cells , 2009 .

[112]  Jiujun Zhang,et al.  A review of accelerated stress tests of MEA durability in PEM fuel cells , 2009 .

[113]  K. S. Dhathathreyan,et al.  Nanostructured platinum catalyst layer prepared by pulsed electrodeposition for use in PEM fuel cells , 2008 .

[114]  Jun Shen,et al.  A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies , 2008 .

[115]  Zongping Shao,et al.  Fabrication and performance test of a catalyst-coated membrane from direct spray deposition , 2008 .

[116]  Geping Yin,et al.  Studies of performance decay of Pt/C catalysts with working time of proton exchange membrane fuel cell , 2008 .

[117]  Wei-Hung Chen,et al.  Carbon film coating on gas diffusion layer for proton exchange membrane fuel cells , 2008 .

[118]  Y. Lai,et al.  Channel intrusion of gas diffusion media and the effect on fuel cell performance , 2008 .

[119]  V. Sinigersky,et al.  Proton conductivity measurements of PEM performed in EasyTest Cell , 2008 .

[120]  P. Atanassov,et al.  Non-platinum cathode catalyst layer composition for single Membrane Electrode Assembly Proton Exchange Membrane Fuel Cell , 2008 .

[121]  B. Yi,et al.  Facilitating mass transport in gas diffusion layer of PEMFC by fabricating micro-porous layer with dry layer preparation , 2008 .

[122]  S. D. Fraser,et al.  Polarization study of a PEMFC with four reference electrodes at hydrogen starvation conditions , 2008 .

[123]  Chien-Ming Lai,et al.  Contribution of Nafion loading to the activity of catalysts and the performance of PEMFC , 2008 .

[124]  T. Tanuma,et al.  Improving MEA durability by using surface-treated catalysts , 2008 .

[125]  Hyung Jin Sung,et al.  Effect of GDL permeability on water and thermal management in PEMFCs - I. Isotropic and anisotropic permeability , 2008 .

[126]  M. Han,et al.  Characterization of gas diffusion layers for PEMFC , 2008 .

[127]  Dokyol Lee,et al.  Effect of loading and distributions of Nafion ionomer in the catalyst layer for PEMFCs , 2008 .

[128]  A. Vahidi,et al.  A review of the main parameters influencing long-term performance and durability of PEM fuel cells , 2008 .

[129]  Tomoki Akita,et al.  Analysis of degradation in PEMFC caused by cell reversal during air starvation , 2008 .

[130]  C. Du,et al.  Treatment and characterization of gas diffusion layers by sucrose carbonization for PEMFC applications , 2008 .

[131]  Tse-Hao Ko,et al.  Effect of carbon black concentration in carbon fiber paper on the performance of low-temperature proton exchange membrane fuel cells , 2008 .

[132]  D. Parker,et al.  Wire rod coating process of gas diffusion layers fabrication for proton exchange membrane fuel cells , 2008 .

[133]  Jong-Won Lee,et al.  Effect of PTFE content in microporous layer on water management in PEM fuel cells , 2008 .

[134]  Jiujun Zhang,et al.  PEM fuel cell electrocatalysts and catalyst layers : fundamentals and applications , 2008 .

[135]  K. W. Wang,et al.  Hydrophobic coatings on carbon electrodes for proton exchange membrane fuel cells , 2007 .

[136]  Jian Colin Sun,et al.  AC impedance technique in PEM fuel cell diagnosis—A review , 2007 .

[137]  S. Grigoriev,et al.  On the possibility of replacement of Pt by Pd in a hydrogen electrode of PEM fuel cells , 2007 .

[138]  S. Kjelstrup,et al.  Three steps in the anode reaction of the polymer electrolyte membrane fuel cell. Effect of CO , 2007 .

[139]  E. Chinarro,et al.  Combustion synthesis and electrochemical characterisation of Pt-Ru-Ni anode electrocatalyst for PEMFC , 2007 .

[140]  Hee-Young Park,et al.  Effect of platinum amount in carbon supported platinum catalyst on performance of polymer electrolyte membrane fuel cell , 2007 .

[141]  Ronghuan He,et al.  Preparation and operation of gas diffusion electrodes for high-temperature proton exchange membrane fuel cells , 2007 .

[142]  Siyu Ye,et al.  Recent advances in activity and durability enhancement of Pt/C catalytic cathode in PEMFC: Part II: Degradation mechanism and durability enhancement of carbon supported platinum catalyst , 2007 .

[143]  Siyu Ye,et al.  Recent advances in activity and durability enhancement of Pt/C catalytic cathode in PEMFC: Part I. Physico-chemical and electronic interaction between Pt and carbon support, and activity enhancement of Pt/C catalyst , 2007 .

[144]  Peter C. Rieke,et al.  Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology , 2007 .

[145]  André D. Taylor,et al.  Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cells , 2007 .

[146]  M. Nogami,et al.  Fabrication and performance of Pt/C electrodes for low temperature H2/O2 fuel cells , 2007 .

[147]  G. Lindbergh,et al.  On the influence of Pt particle size on the PEMFC cathode performance , 2007 .

[148]  J. K. Kim,et al.  Comparison of electrical conductivity data obtained by four-electrode and four-point probe methods for graphite-based polymer composites , 2007 .

[149]  K. S. Dhathathreyan,et al.  Catalyst layer in PEMFC electrodes—Fabrication, characterisation and analysis , 2007 .

[150]  Sung Hyun Kim,et al.  Fabrication methods for low-Pt-loading electrocatalysts in proton exchange membrane fuel cell systems , 2007 .

[151]  Chaoyang Wang,et al.  Elucidating differences between carbon paper and carbon cloth in polymer electrolyte fuel cells , 2007 .

[152]  Hasuck Kim,et al.  Preparation of low Pt loading electrodes on Nafion (Na+)-bonded carbon layer with galvanostatic pulses for PEMFC application , 2006 .

[153]  B. Popov,et al.  Effect of carbon loading in microporous layer on PEM fuel cell performance , 2006 .

[154]  Hasuck Kim,et al.  Performance and stability of Pt-based ternary alloy catalysts for PEMFC , 2006 .

[155]  M. Fowler,et al.  In-plane and through-plane gas permeability of carbon fiber electrode backing layers , 2006 .

[156]  Hongtan Liu,et al.  Effects of the electrical resistances of the GDL in a PEM fuel cell , 2006 .

[157]  David A. Harrington,et al.  Characterisation of proton exchange membrane fuel cell (PEMFC) failures via electrochemical impedance spectroscopy , 2006 .

[158]  David P. Wilkinson,et al.  High temperature PEM fuel cells , 2006 .

[159]  J. Adin Mann,et al.  Characterization of transport properties in gas diffusion layers for proton exchange membrane fuel cells: 1. Wettability (internal contact angle to water and surface energy of GDL fibers) , 2006 .

[160]  M. Han,et al.  Development of carbon-filled gas diffusion layer for polymer electrolyte fuel cells , 2006 .

[161]  M. Durstock,et al.  Proton conductivity and properties of sulfonated polyarylenethioether sulfones as proton exchange membranes in fuel cells , 2006 .

[162]  Tomoki Akita,et al.  Analytical TEM study of Pt particle deposition in the proton-exchange membrane of a membrane-electrode-assembly , 2006 .

[163]  Peng-fei Shi,et al.  Dual-bonded catalyst layer structure cathode for PEMFC , 2006 .

[164]  T. Zhao,et al.  Effect of anode backing layer on the cell performance of a direct methanol fuel cell , 2006 .

[165]  E. Ticianelli,et al.  Studies of the performance of PEM fuel cell cathodes with the catalyst layer directly applied on Nafion membranes , 2006 .

[166]  M. Rodrigo,et al.  Effect of the catalytic ink preparation method on the performance of high temperature polymer electrolyte membrane fuel cells , 2006 .

[167]  O. Solorza-Feria,et al.  RuxCrySez electrocatalyst for oxygen reduction in a polymer electrolyte membrane fuel cell , 2006 .

[168]  H. Daiguji,et al.  Effect of glycerol on micro/nano structures of catalyst layers in polymer electrolyte membrane fuel cells , 2006 .

[169]  Sanjeev Mukerjee,et al.  High performance polymer electrolyte fuel cells with ultra-low Pt loading electrodes prepared by dual ion-beam assisted deposition , 2006 .

[170]  Mark Pritzker,et al.  Capillary pressure and hydrophilic porosity in gas diffusion layers for polymer electrolyte fuel cells , 2006 .

[171]  Andrew Dicks,et al.  The role of carbon in fuel cells , 2006 .

[172]  S. Chan,et al.  Numerical analysis of Pt utilization in PEMFC catalyst layer using random cluster model , 2006 .

[173]  Min-Suk Kim,et al.  The preparation of Pt/C catalysts using various carbon materials for the cathode of PEMFC , 2006 .

[174]  C. Hebling,et al.  Hydrophilicity and hydrophobicity study of catalyst layers in proton exchange membrane fuel cells , 2006 .

[175]  J. Soler,et al.  Novel method for preparation of PEMFC electrodes by the electrospray technique , 2005 .

[176]  L. Daza,et al.  PEMFC electrode preparation: Influence of the solvent composition and evaporation rate on the catalytic layer microstructure , 2005 .

[177]  Trung Van Nguyen,et al.  Effect of Thickness and Hydrophobic Polymer Content of the Gas Diffusion Layer on Electrode Flooding Level in a PEMFC , 2005 .

[178]  Arumugam Manthiram,et al.  High performance membrane-electrode assemblies with ultra-low Pt loading for proton exchange membrane fuel cells , 2005 .

[179]  M.H. Nehrir,et al.  Dynamic models and model validation for PEM fuel cells using electrical circuits , 2005, IEEE Transactions on Energy Conversion.

[180]  P. Pickup,et al.  An electrochemical impedance spectroscopy study of fuel cell electrodes , 2005 .

[181]  K. V. Lovell,et al.  A hybrid technique for fabricating PEMFC's low platinum loading electrodes , 2005 .

[182]  Abu Bakar Mohamad,et al.  Performance optimisation of PEM fuel cell during MEA fabrication , 2004 .

[183]  Jung-Hoon Kim,et al.  A novel direct deposition of Pt catalysts on Nafion impregnated with polypyrrole for PEMFC , 2004 .

[184]  In-Hwan Oh,et al.  Effect of the ionomers in the electrode on the performance of PEMFC under non-humidifying conditions , 2004 .

[185]  Branko N. Popov,et al.  Preparation of PEM fuel cell electrodes using pulse electrodeposition , 2004 .

[186]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[187]  Ho-jin Kweon,et al.  Polybenzimidazoles for High Temperature Fuel Cell Applications , 2004 .

[188]  G Sasikumar,et al.  Dependence of optimum Nafion content in catalyst layer on platinum loading , 2004 .

[189]  EunAe Cho,et al.  Influence of cathode gas diffusion media on the performance of the PEMFCs , 2004 .

[190]  Tae-Hee Lee,et al.  A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC , 2004 .

[191]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[192]  S. Litster,et al.  PEM fuel cell electrodes , 2004 .

[193]  Won-Yong Lee,et al.  Fabrication of a thin catalyst layer using organic solvents , 2004 .

[194]  Won-Yong Lee,et al.  Effect of pore structure of catalyst layer in a PEMFC on its performance , 2003 .

[195]  Chang-Soo Kim,et al.  A multi-layer structured cathode for the PEMFC , 2003 .

[196]  Abu Bakar Mohamad,et al.  Improved membrane and electrode assemblies for proton exchange membrane fuel cells , 2003 .

[197]  Zeng-min Shen,et al.  Carbon fiber paper for fuel cell electrode , 2002 .

[198]  Arunachala Mada Kannan,et al.  Pt-M (M = Fe, Co, Ni and Cu) electrocatalysts synthesized by an aqueous route for proton exchange membrane fuel cells , 2002 .

[199]  F. A. de Bruijn,et al.  The influence of carbon dioxide on PEM fuel cell anodes , 2002 .

[200]  M. De Francesco,et al.  Comparison of high surface Pt/C catalysts by cyclic voltammetry , 2002 .

[201]  P. Pickup,et al.  Characterization of polymer supported catalysts by cyclic voltammetry and rotating disk voltammetry , 2000 .

[202]  A. Shukla,et al.  Diffusion layer parameters influencing optimal fuel cell performance , 2000 .

[203]  Patrick Bertrand,et al.  Oxygen reduction catalysts for polymer electrolyte fuel cells from the pyrolysis of FeII acetate adsorbed on 3,4,9,10-perylenetetracarboxylic dianhydride , 1999 .

[204]  D. Bevers,et al.  Examination of the influence of PTFE coating on the properties of carbon paper in polymer electrolyte fuel cells , 1996 .

[205]  Charles R. Martin,et al.  Electrode kinetics of oxygen reduction at carbon-supported and unsupported platinum microcrystallite/Nafion® interfaces , 1992 .