Analysis of low-molar-mass materials in commercial rubber samples by Soxhlet and headspace extractions followed by GC-MS analysis.

[1]  Sung‐Seen Choi.  Characteristics of the pyrolysis patterns of styrene-butadiene rubbers with differing microstructures , 2002 .

[2]  M. Forrest.  Chemical analysis of rubber samples that had been naturally aged for 40 years , 2001 .

[3]  J. Bart.  Direct solid sampling methods for gas chromatographic analysis of polymer/additive formulations , 2001 .

[4]  Sung‐Seen Choi.  Characterization of bound rubber of filled styrene-butadiene rubber compounds using pyrolysis-gas chromatography , 2000 .

[5]  J. Hiltz.  Pyrolysis gas chromatography/mass spectrometry identification of poly(butadiene-acrylonitrile) rubbers , 2000 .

[6]  R. Lehrle,et al.  Use of pyrolysis-GC-MS to assess the thermal degradation behaviour of polymers containing chlorine II. Thermal stability characteristics of Neoprene/chlorobutyl rubber composites, before and after artificial ageing , 2000 .

[7]  B. Marcato,et al.  Microwave-assisted extraction by fast sample preparation for the systematic analysis of additives in polyolefins by high-performance liquid chromatography. , 2000, Journal of chromatography. A.

[8]  W. Kaminsky,et al.  Pyrolysis of polychloroprene rubber in a fluidised-bed reactor: product composition with focus on chlorinated aromatic compounds , 2000 .

[9]  R. Lehrle,et al.  Pyrolysis–GC–MS used to study the thermal degradation of polymers containing chlorine III. Kinetics and mechanisms of polychloroprene pyrolysis. Selected ion current plots used to evaluate rate constants for the evolution of HCl and other degradation products ☆ , 2000 .

[10]  L. T. Taylor,et al.  Comparison of methods for quantitative analysis of additives in low-density polyethylene using supercritical fluid and enhanced solvent extraction. , 1999, Journal of chromatography. A.

[11]  L. Bailey,et al.  Evaluation of current compendial physiochemical test procedures for pharmaceutical elastomeric closures and development of an improved HPLC procedure. , 1999, PDA journal of pharmaceutical science and technology.

[12]  M. Fuh,et al.  Quantitative analysis of nitrile rubber/chloroprene by pyrolysis/gas chromatography/mass spectrometry , 1998 .

[13]  L. T. Taylor,et al.  Evolution of a method for quantitative supercritical fluid extraction of Ethanox 330 antioxidant from high-density polyethylene , 1998 .

[14]  K. Bartle,et al.  Factors affecting high-pressure solvent extraction (accelerated solvent extraction) of additives from polymers. , 1998, Analytical chemistry.

[15]  C. Cramers,et al.  Parameters affecting the accelerated solvent extraction of polymeric samples , 1997 .

[16]  R. Zenobi,et al.  Selective in Situ Detection of Polymer Additives Using Laser Mass Spectrometry , 1996 .

[17]  T. Setnescu,et al.  Thermo-oxidative behaviour of halobutyl and butyl elastomers , 1996 .

[18]  H. Fales,et al.  Rubber stoppers as sources of contaminants in electrospray analysis of peptides and proteins. , 1996, Analytical chemistry.

[19]  C. Cramers,et al.  Effects of Modifier Addition and Temperature Variation in SFE of Polymeric Materials , 1996 .

[20]  M. Senō,et al.  Thermal degradation of polymers in the melt, 1. Characterization of volatile oligomers formed by thermal degradation of polyisobutylene , 1995 .

[21]  C. Juo,et al.  Mass spectrometric analysis of additives in polymer extracts by desorption chemical ionization and collisional induced dissociation with B/E linked scanning , 1995 .

[22]  K. Bartle,et al.  Supercritical fluid extraction and chromatography of aromatic amines , 1994 .

[23]  A. Baillet,et al.  Determination of phenolic antioxidants in pharmaceutical formulations by liquid chromatography and migration study on HDPE packagings , 1993 .

[24]  A. Hulst,et al.  Determination of mustard gas and related vesicants in rubber and paint by gas chromatography-mass spectrometry , 1992 .

[25]  J. M. Levy,et al.  Optimization of Experimental Parameters for the Determination of Polymer Additives using On-Line SFE—SFC , 1991 .

[26]  H. Daimon,et al.  Directly coupled supercritical-fluid extraction/capillary supercritical-fluid chromatography of polymer additives , 1991 .

[27]  A. Bruchet,et al.  Investigation of low mass oligomers and polymer additives from plastics. Part II: Application to polyolefin soxhlet extracts , 1991 .

[28]  J. M. Levy,et al.  Quantitative analysis of polymer additives in low density polyethylene using supercritical fluid extraction/supercritical fluid chromatography , 1990 .

[29]  R. Moulder,et al.  Analysis of chemical additives in polypropylene films using capillary supercritical fluid chromatography , 1989 .

[30]  J. Chalmers,et al.  Polymer additive characterization by capillary supercritical fluid chromatography/Fourier transform infrared microspectrometry , 1988 .

[31]  D. Munteanu,et al.  High-performance liquid chromatographic separation of polyolefin antioxidants and light-stabilisers , 1987 .

[32]  Robert E. Harris,et al.  Identification of organic additives in rubber vulcanizates using mass spectrometry , 1986 .

[33]  J. Vargo,et al.  Characterization of additives in plastics by liquid chromatography-mass spectrometry , 1986 .

[34]  J. Vargo,et al.  Identification of Antioxidant and Ultraviolet Light Stabilizing Additives in Plastics by Liquid Chromatography/Mass Spectrometry , 1985 .

[35]  B. Marcato,et al.  Chromatographic determination of some hindered amine light stabilizers in polyolefins , 1983 .

[36]  J. Pausch,et al.  Application of Headspace Gas Chromatography to Analysis of Residual Volatiles in Synthetic Rubbers , 1977 .

[37]  E. Sugita,et al.  Interference by butyl rubber stoppers in GLC analysis for theophylline. , 1976, Journal of pharmaceutical sciences.