The Entropy of an Armco Iron under Irreversible Deformation

This work is devoted to the development of a theoretical approach for the calculation of entropy in metals under plastic deformation. The thermodynamic analysis of the plastic deformation process allowed us to obtain the expression for determination of the entropy production. The value of the entropy production in an Armco iron specimen under plastic deformation as calculated the basis of the proposed technique and infrared thermography data. This method also lets us define the inelastic strain caused by the initiation and growth of the defects which was used as the internal variable in the considered thermomechanical model from the experimental data. In order to verify the obtained results a theoretical analysis of the modeled situation was carried out.

[1]  W. Oliferuk,et al.  Experimental analysis of energy storage rate components during tensile deformation of polycrystals , 2004 .

[2]  André Chrysochoos,et al.  Thermal and dissipative effects accompanying Lüders band propagation , 2001 .

[3]  Michael M. Khonsari,et al.  On the thermodynamics of degradation , 2008, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[4]  A. Rosakis,et al.  A thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals , 2000 .

[5]  En-Jui Lee.  Elastic-Plastic Deformation at Finite Strains , 1969 .

[6]  Antonino Risitano,et al.  Cumulative damage evaluation of steel using infrared thermography , 2010 .

[7]  Mehdi Amiri,et al.  On the Role of Entropy Generation in Processes Involving Fatigue , 2011, Entropy.

[8]  O. B. Naimark,et al.  Theoretical and experimental study of energy dissipation in the course of strain localization in iron , 2009 .

[9]  Oleg Plekhov,et al.  Energy dissipation and storage in iron under plastic deformation (experimental study and numerical simulation) , 2013 .

[10]  Thierry Palin-Luc,et al.  Theoretical analysis, infrared and structural investigations of energy dissipation in metals under cyclic loading , 2007 .

[11]  D. E. Carlson,et al.  An introduction to thermomechanics , 1983 .

[12]  D. L. Holt,et al.  The stored energy of cold work , 1958 .

[13]  M. P. Luong,et al.  Infrared thermographic scanning of fatigue in metals , 1995 .

[14]  N. L. Johnson,et al.  Continuous Univariate Distributions. , 1995 .

[15]  Lallit Anand,et al.  The stored energy of cold work, thermal annealing, and other thermodynamic issues in single crystal plasticity at small length scales , 2014 .

[16]  Nicolas Saintier,et al.  Experimental study of energy accumulation and dissipation in iron in an elastic-plastic transition , 2007 .

[17]  Barney E. Klamecki,et al.  An entropy-based model of plastic deformation energy dissipation in sliding , 1984 .

[18]  B. A. Greenberg,et al.  Some features of the formation and destruction of dislocation barriers in intermetallic compounds: I. Theory , 2006 .

[19]  Sia Nemat-Nasser,et al.  Determination of temperature rise during high strain rate deformation , 1998 .

[20]  M. Beghi,et al.  Measurement of the entropy production due to irreversible deformation of metals , 1982 .

[21]  Dmitry V. Lychagin,et al.  Spatial organization of deformation in aluminum [1ī2] single crystals in compression , 2009 .

[22]  G. Taylor,et al.  The Heat Developed during Plastic Extension of Metals , 1925 .

[23]  A. Zmitrowicz.  A thermodynamical model of contact, friction and wear: I governing equations , 1987 .

[24]  J. Lubliner.  On the thermodynamic foundations of non-linear solid mechanics , 1972 .

[25]  Zhendong Dai,et al.  Entropy generation related to plastic deformation in fretting friction , 2014 .

[26]  Natalya Popova,et al.  Grain structure, geometrically necessary dislocations and second-phase particles in polycrystals of micro- and mesolevels , 2009 .

[27]  D. Wallace,et al.  Irreversible thermodynamics of flow in solids , 1980 .

[28]  Zenon Mróz,et al.  On the uniqueness problem in coupled thermoplasticity , 1976 .

[29]  J. C. Simo,et al.  Associated coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation , 1992 .