A process model for the distortion induced by the electron-beam welding of a nickel-based superalloy

A process model suitable for the prediction of the distortion induced during the electron-beam welding of nickel-based superalloys is described. For the purposes of model validation, processing trials on WASPALOY have been carried out using an industrial-scale welding apparatus. Particular emphasis has been placed on the effect of altering the focal position of the beam. The heat transfer occurring during welding has been characterized, and values of the thermal efficiency are reported. The thermal cycles experienced by material in the heat-affected zone (HAZ) are reproduced accurately. The resulting modes of distortion, both angular and camber, have been analyzed. For one of the welds, the residual-stress state has been determined using the neutron diffraction technique, and it is shown that the predictions are in reasonable agreement with the observations. While there are some discrepancies, the model is capable of rationalizing the modes and extent of distortion and the manner in which these depend upon the focal position of the beam.

[1]  J. Goldak,et al.  Coupling Heat Transfer, Microstructure Evolution and Thermal Stress Analysis in Weld Mechanics , 1992 .

[2]  J. Devaux,et al.  A theoretical and numerical approach to the plastic behaviour of steels during phase transformations—I. Derivation of general relations , 1986 .

[3]  J. Goldak,et al.  Computer modeling of heat flow in welds , 1986 .

[4]  Phiroze Kapadia,et al.  Upwelling in the liquid region surrounding the keyhole in penetration welding with a laser , 1987 .

[5]  John Goldak,et al.  Consistent strain fields in 3D finite element analysis of welds , 1990 .

[6]  Mark R. Daymond,et al.  Use of Rietveld refinement for elastic macrostrain determination and for evaluation of plastic strain history from diffraction spectra , 1997 .

[7]  John Lancaster,et al.  The Physics of Welding , 1984 .

[8]  IańM Richardson,et al.  The physics of welding, 2nd ed.: Edited by J. F. Lancaster. Pp. 340. Pergamon Press, Oxford. 1986. Hardcover £32.00 ($55.00), Flexicover £16.25 ($28.00) , 1988 .

[9]  J. Z. Zhu,et al.  The finite element method , 1977 .

[10]  Kaspar Willam,et al.  Computational aspects of welding stress analysis , 1982 .

[11]  N. O Okerblom,et al.  The calculations of deformations of welded metal structures , 1958 .

[12]  J. Goldak,et al.  A new finite element model for welding heat sources , 1984 .

[13]  O. C. Zienkiewicz,et al.  The finite element method, fourth edition; volume 2: solid and fluid mechanics, dynamics and non-linearity , 1991 .

[14]  John Lancaster,et al.  Handbook of structural welding , 1993 .

[15]  Lennart Karlsson,et al.  Finite element simulation and measurement of welding residual stresses , 1994 .

[16]  R. Reed,et al.  Determination of the plane specific elastic constants of Waspaloy using neutron diffraction , 1999 .

[17]  Lars-Erik Lindgren,et al.  Deformations and stresses in welding of shell structures , 1988 .

[18]  H. Schultz.  Electron Beam Welding , 1994 .

[19]  J. Devaux,et al.  Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases , 1989 .

[20]  R. Reed,et al.  On the generation of microstrains during the plastic deformation of Waspaloy , 1999 .

[21]  S. J. Maddox,et al.  Fatigue strength of welded structures , 1991 .

[22]  Stan A David,et al.  Trends in Welding Research , 1986 .

[23]  Yoshiaki Arata,et al.  Plasma Electron and Laser Beam Technology: Development and Use in Materials Processing , 1986 .

[24]  P. Withers,et al.  Comparison of three different techniques for measuring the residual stresses in an electron beam-welded plate of WASPALOY , 1999 .

[25]  Stan A David,et al.  Physical processes in fusion welding , 1995 .