论文信息 - Lateral compression of empty and filled single tubes by short width indenters

Lateral compression of empty and filled single tubes by short width indenters

Abstract Experiments were performed wherein thin-walled square aluminium tubes were subjected to lateral compression by short width indenters in two different modes, under both quasi-static and impact loading. Tubes employed were empty as well as filled with polyurethane foam and kail wood. The deformation histories of the collapsing tubes were studied and their collapse loads as well as post collapse load-compression curves are presented. Based on the mechanism of deformation observed experimentally and considering the material to be rigid-plastic, collapse load values and post collapse load-compression curves were computed. The results thus obtained compared with experimental values very well.

N K Gupta | P Ray

[1] Atul Khullar,et al. Lateral collapse of orthogonal and non-orthogonal cross-layered arrays of square and rectangular tubes , 1994 .

[2] N. Gupta,et al. Transverse collapse of thin-walled square tubes in opposed loadings , 1990 .

[3] N. W. Murray,et al. The large-deflection pure bending properties of a square thin-walled tube , 1993 .

[4] N. R. Chitkara,et al. Plastic collapse of square rings , 1982 .

[5] Nk Gupta,et al. Collapse of thin-walled empty and filled square tubes under lateral loading between rigid plates , 1998 .

[6] Stephen R Reid,et al. LATERALLY COMPRESSED METAL TUBES AS IMPACT ENERGY ABSORBERS. , 1983 .

[7] P. H. Thornton. ENERGY ABSORPTION BY FOAM FILLED STRUCTURES , 1980 .

[8] W. Johnson,et al. The compression of crossed layers of thin tubes , 1977 .

[9] Stephen R Reid,et al. Phenomena associated with the crushing of metal tubes between rigid plates , 1980 .

[10] Dušan Kecman,et al. Bending collapse of rectangular and square section tubes , 1983 .

[11] P. H. Thornton. The collapse of square section tubes in bending , 1979 .