Application and performance of 3D printing in nanobiomaterials

3D printing (3DP) is becoming a research and development focus in nanobiomaterials as it can quickly and accurately fabricate any desired 3D tissuemodel only if its size is appropriate. The different material powders (with different dimensional scales) and the printing strategies are the most direct factors influencing 3DP quality. With the development of nanotechnologies, 3DP is adopted more frequently for its rapidness in fabrication and precision in geometry. The fabrication in micro/nanoscale may change the performance of biomaterials and devices because it can retainmore anisotropy of biomaterials comparedwith the traditionally rapid prototyping techniques. Thus, the biosafety issue is especially concerned by many researchers and is investigated in performance and safety of biomaterials and devices. This paper investigates the performance of 3DP in fabrication of nanobiomaterials and devices so as to partially explain how 3DP influences the performance and safety of nanobiomaterials.

[1]  J. R. Castrejón-Pita,et al.  A simple large-scale droplet generator for studies of inkjet printing. , 2008, The Review of scientific instruments.

[2]  Sawyer B. Fuller,et al.  A fast flexible ink-jet printing method for patterning dissociated neurons in culture , 2004, Journal of Neuroscience Methods.

[3]  Jeroen Rouwkema,et al.  Tissue assembly and organization: developmental mechanisms in microfabricated tissues. , 2009, Biomaterials.

[4]  Anja Boisen,et al.  Inkjet printing as a technique for filling of micro-wells with biocompatible polymers , 2013 .

[5]  D. Yoo.  New paradigms in hierarchical porous scaffold design for tissue engineering. , 2013, Materials science & engineering. C, Materials for biological applications.

[6]  Tsukasa Akasaka,et al.  Maturation of osteoblast-like SaoS2 induced by carbon nanotubes , 2009, Biomedical materials.

[7]  Mark A. Ganter,et al.  A review of process development steps for new material systems in three dimensional printing (3DP) , 2008 .

[8]  D. Hutmacher,et al.  Scaffold development using 3D printing with a starch-based polymer , 2002 .

[9]  M Bohner,et al.  Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing. , 2011, Acta biomaterialia.

[10]  Sarit B. Bhaduri,et al.  Drop-on-demand printing of cells and materials for designer tissue constructs , 2007 .

[11]  G. Hays,et al.  Identification of genetically and oceanographically distinct blooms of jellyfish , 2013, Journal of The Royal Society Interface.

[12]  Tsukasa Akasaka,et al.  In vitro evaluation of porous poly(L-lactic acid) scaffold reinforced by chitin fibers. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[13]  Yan Huang,et al.  Effect of substrate stiffness on the functions of rat bone marrow and adipose tissue derived mesenchymal stem cells in vitro. , 2014, Journal of biomedical materials research. Part A.

[14]  Mark A. Randolph,et al.  Design of composite scaffolds and three-dimensional shape analysis for tissue-engineered ear , 2013, Journal of The Royal Society Interface.

[15]  Nicholas A Peppas,et al.  Micro- and nanotechnologies for intelligent and responsive biomaterial-based medical systems. , 2009, Advanced drug delivery reviews.

[16]  Tao Xu,et al.  Viability and electrophysiology of neural cell structures generated by the inkjet printing method. , 2006, Biomaterials.

[17]  Margam Chandrasekaran,et al.  Comparison of drying methods in the fabrication of collagen scaffold via indirect rapid prototyping. , 2007, Journal of biomedical materials research. Part B, Applied biomaterials.

[18]  Lu Wang,et al.  Nanostructured scaffolds for bone tissue engineering. , 2013, Journal of biomedical materials research. Part A.

[19]  M. Hara,et al.  Subtractive offset printing for fabrication of sub micrometer scale electrodes with gold nanoparticles , 2012 .

[20]  T. Boland,et al.  Inkjet printing of viable mammalian cells. , 2005, Biomaterials.

[21]  Rashid Bashir,et al.  3-D biofabrication using stereolithography for biology and medicine , 2012, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[22]  Min Wang,et al.  Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres , 2008, Journal of materials science. Materials in medicine.

[23]  E. Bernardo,et al.  Multifunctional advanced ceramics from preceramic polymers and nano-sized active fillers , 2013 .

[24]  Wim E Hennink,et al.  In vivo biocompatibility and biodegradation of 3D-printed porous scaffolds based on a hydroxyl-functionalized poly(ε-caprolactone). , 2012, Biomaterials.

[25]  Thomas Pertsch,et al.  3D materials made of gold using Nanoimprint Lithography , 2010 .

[26]  A. Blayo,et al.  Inkjet printing of silver nano-suspensions on ceramic substrates - Sintering temperature effect on electrical properties , 2013 .

[27]  Michael J. Cima,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .

[28]  Giovanni Vozzi,et al.  Substrate stiffness influences high resolution printing of living cells with an ink-jet system. , 2011, Journal of bioscience and bioengineering.

[29]  Tsukasa Akasaka,et al.  Effect of carbon nanotubes on cellular functions in vitro. , 2009, Journal of biomedical materials research. Part A.

[30]  Wei Dong,et al.  Collagen-based implants reinforced by chitin fibres in a goat shank bone defect model. , 2006, Biomaterials.

[31]  Francesca De Crescenzio,et al.  CAD/CAM and rapid prototyped scaffold construction for bone regenerative medicine and surgical transfer of virtual planning: A pilot study , 2009, Comput. Medical Imaging Graph..

[32]  Bradley R Ringeisen,et al.  Jet‐based methods to print living cells , 2006, Biotechnology journal.

[33]  J. Ciurana,et al.  Biomedical production of implants by additive electro-chemical and physical processes , 2012 .

[34]  Mangirdas Malinauskas,et al.  Laser 3D micro/nanofabrication of polymers for tissue engineering applications , 2013 .

[35]  I. Noh,et al.  Modification of the bulk properties of the porous poly(lactide-co-glycolide) scaffold by irradiation with a cyclotron ion beam with high energy for its application in tissue engineering , 2009, Biomedical materials.

[36]  M. Cima,et al.  Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1990 .

[37]  B. Ratner,et al.  Quantitative characterization of sphere‐templated porous biomaterials , 2005 .

[38]  Sotirios Koutsopoulos,et al.  Molecular fabrications of smart nanobiomaterials and applications in personalized medicine. , 2012, Advanced drug delivery reviews.

[39]  E. Bertagnolli,et al.  Optimization of 3D patterning by Ga implantation and reactive ion etching (RIE) for nanoimprint lithography (NIL) stamp fabrication , 2012 .

[40]  Rui L Reis,et al.  Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency. , 2011, Acta biomaterialia.

[41]  Min Sung Kim,et al.  Nanotopography-guided tissue engineering and regenerative medicine. , 2013, Advanced drug delivery reviews.

[42]  Fumio Watari,et al.  Osteogenic differentiation of human adipose-derived stem cells induced by osteoinductive calcium phosphate ceramics. , 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

[43]  Heungsoo Shin,et al.  Fabrication methods of an engineered microenvironment for analysis of cell-biomaterial interactions. , 2007, Biomaterials.

[44]  Amit Bandyopadhyay,et al.  Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds. , 2012, Dental materials : official publication of the Academy of Dental Materials.

[45]  Lyndon F Cooper,et al.  The effects of implant surface nanoscale features on osteoblast-specific gene expression. , 2009, Biomaterials.

[46]  F. Guillemot,et al.  High-throughput laser printing of cells and biomaterials for tissue engineering. , 2010, Acta biomaterialia.

[47]  Dongmei Li,et al.  Repairing goat tibia segmental bone defect using scaffold cultured with mesenchymal stem cells. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

[48]  Matthieu Piel,et al.  Microfabricated devices for cell biology: all for one and one for all. , 2013, Current opinion in cell biology.

[49]  Ali Khademhosseini,et al.  Microfabrication technologies for oral drug delivery. , 2012, Advanced drug delivery reviews.

[50]  T. Boland,et al.  Human microvasculature fabrication using thermal inkjet printing technology. , 2009, Biomaterials.

[51]  Qin Lian,et al.  Computer modeling approach for a novel internal architecture of artificial bone , 2006, Comput. Aided Des..

[52]  Eric C. Carnes,et al.  Cell-directed-assembly: directing the formation of nano/bio interfaces and architectures with living cells. , 2011, Biochimica et biophysica acta.

[53]  F. Pu,et al.  Evaluation on cartilage morphology after intra-articular injection of titanium dioxide nanoparticles in rats , 2012 .

[54]  David H Gracias,et al.  3D lithographically fabricated nanoliter containers for drug delivery. , 2007, Advanced drug delivery reviews.

[55]  Yubo Fan,et al.  Biomedical investigation of CNT based coatings , 2011 .

[56]  Fumio Watari,et al.  Current investigations into carbon nanotubes for biomedical application , 2010, Biomedical materials.

[57]  Peter Dubruel,et al.  A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. , 2012, Biomaterials.

[58]  Christian Bergmann,et al.  3D printing of bone substitute implants using calcium phosphate and bioactive glasses , 2010 .

[59]  Lei Jiang,et al.  Bio-inspired superoleophobic and smart materials: Design, fabrication, and application , 2013 .

[60]  Joseph Jagur-Grodzinski,et al.  Polymers for tissue engineering, medical devices, and regenerative medicine. Concise general review of recent studies , 2006 .

[61]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[62]  Rolf Mülhaupt,et al.  Desktop manufacturing of complex objects, prototypes and biomedical scaffolds by means of computer‐assisted design combined with computer‐guided 3D plotting of polymers and reactive oligomers , 2000 .

[63]  Dongjin Yoo,et al.  New paradigms in internal architecture design and freeform fabrication of tissue engineering porous scaffolds. , 2012, Medical engineering & physics.

[64]  Nicholas A Peppas,et al.  Temperature-responsive polymer-gold nanocomposites as intelligent therapeutic systems. , 2007, Journal of biomedical materials research. Part A.

[65]  Thomas A. Campbell,et al.  3D printing of multifunctional nanocomposites , 2013 .

[66]  Enrico Drioli,et al.  Bio-hybrid organs and tissues for patient therapy: A future vision for 2030 , 2012 .

[67]  GeunHyung Kim,et al.  Hybrid Process for Fabricating 3D Hierarchical Scaffolds Combining Rapid Prototyping and Electrospinning , 2008 .

[68]  Charles Tator,et al.  Complete spinal cord transection treated by implantation of a reinforced synthetic hydrogel channel results in syringomyelia and caudal migration of the rostral stump. , 2006, Neurosurgery.

[69]  Yubo Fan,et al.  Biocompatibility and toxicity of nanoparticles and nanotubes , 2012 .

[70]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[71]  Gianaurelio Cuniberti,et al.  Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. , 2011, Acta biomaterialia.

[72]  A. Boisen,et al.  Fabrication of biopolymer cantilevers using nanoimprint lithography , 2011 .

[73]  U. Demirci,et al.  Bioprinting for stem cell research. , 2013, Trends in biotechnology.

[74]  Youn-Sik Lee,et al.  Preparation and characterization of nano-scale ZnO as a buffer layer for inkjet printing of silver cathode in polymer solar cells , 2008 .

[75]  Jiang Wang,et al.  TiO2 nanoparticles translocation and potential toxicological effect in rats after intraarticular injection. , 2009, Biomaterials.

[76]  Vladimir Mironov,et al.  Organ printing: tissue spheroids as building blocks. , 2009, Biomaterials.

[77]  Holger Reinecke,et al.  High aspect ratio- and 3D- printing of freestanding sophisticated structures , 2009 .

[78]  Yit‐Tsong Chen,et al.  Silicon nanowire field-effect transistor-based biosensors for biomedical diagnosis and cellular recording investigation , 2011 .

[79]  Jennifer L West,et al.  Temperature-sensitive hydrogels with SiO2-Au nanoshells for controlled drug delivery. , 2007, Journal of controlled release : official journal of the Controlled Release Society.

[80]  N. Elvassore,et al.  Gas anti-solvent precipitation assisted salt leaching for generation of micro- and nano-porous wall in bio-polymeric 3D scaffolds. , 2012, Materials science & engineering. C, Materials for biological applications.

[81]  Fumio Watari,et al.  Biocomposites reinforced by fibers or tubes as scaffolds for tissue engineering or regenerative medicine. , 2014, Journal of biomedical materials research. Part A.

[82]  Clemens A van Blitterswijk,et al.  The effect of calcium phosphate microstructure on bone-related cells in vitro. , 2008, Biomaterials.

[83]  F. Beckmann,et al.  The morphology of anisotropic 3D-printed hydroxyapatite scaffolds. , 2008, Biomaterials.

[84]  Wei Sun,et al.  Effects of Process Parameters on Cell Damage in a 3D Cell Printing Process , 2009 .

[85]  Fumio Watari,et al.  The use of carbon nanotubes to induce osteogenic differentiation of human adipose-derived MSCs in vitro and ectopic bone formation in vivo. , 2012, Biomaterials.

[86]  Chaozong Liu,et al.  Design and Development of Three-Dimensional Scaffolds for Tissue Engineering , 2007 .

[87]  Vladimir Mironov,et al.  Nanotechnology in vascular tissue engineering: from nanoscaffolding towards rapid vessel biofabrication. , 2008, Trends in biotechnology.