The Calcium-Looping technology for CO2 capture: On the important roles of energy integration and sorbent behavior

The Calcium Looping (CaL) technology, based on the multicyclic carbonation/calcination of CaO in gas–solid fluidized bed reactors at high temperature, has emerged in the last years as a potentially low cost technology for CO2 capture. In this manuscript a critical review is made on the important roles of energy integration and sorbent behavior in the process efficiency. Firstly, the strategies proposed to reduce the energy demand by internal integration are discussed as well as process modifications aimed at optimizing the overall efficiency by means of external integration. The most important benefit of the high temperature CaL cycles is the possibility of using high temperature streams that could reduce significantly the energy penalty associated to CO2 capture. The application of the CaL technology in precombustion capture systems and energy integration, and the coupling of the CaL technology with other industrial processes are also described. In particular, the CaL technology has a significant potential to be a feasible CO2 capture system for cement plants. A precise knowledge of the multicyclic CO2 capture behavior of the sorbent at the CaL conditions to be expected in practice is of great relevance in order to predict a realistic capture efficiency and energy penalty from process simulations. The second part of this manuscript will be devoted to this issue. Particular emphasis is put on the behavior of natural limestone and dolomite, which would be the only practical choices for the technology to meet its main goal of reducing CO2 capture costs. Under CaL calcination conditions for CO2 capture (necessarily implying high CO2 concentration in the calciner), dolomite seems to be a better alternative to limestone as CaO precursor. The proposed techniques of recarbonation and thermal/mechanical pretreatments to reactivate the sorbent and accelerate calcination will be the final subjects of this review.

[1]  Shawn Litster,et al.  Exergy and economic analysis of a CaO-looping gasifier for IGFC–CCS and IGCC–CCS , 2014 .

[2]  Vasilije Manovic,et al.  Thermal activation of CaO-based sorbent and self-reactivation during CO2 capture looping cycles. , 2008, Environmental science & technology.

[3]  J. Valverde,et al.  Enhancement of fast CO2 capture by a nano-SiO2/CaO composite at Ca-looping conditions. , 2012, Environmental science & technology.

[4]  John R. Grace,et al.  Sulfation and reactivation characteristics of nine limestones , 2000 .

[5]  Loïc Favergeon,et al.  Atomic-scale study of calcite nucleation in calcium oxide , 2013 .

[6]  Jose Manuel Valverde,et al.  Ca-based synthetic materials with enhanced CO2 capture efficiency , 2013 .

[7]  Luis M. Romeo,et al.  Hydrodynamical model and experimental results of a calcium looping cycle for CO2 capture , 2013 .

[8]  Matteo C. Romano,et al.  Coal-fired power plant with calcium oxide carbonation for postcombustion CO2 capture , 2009 .

[9]  Yann Le Moullec,et al.  Process Modifications for Solvent-Based Post Combustion CO2 Capture , 2014 .

[10]  Nicholas H. Florin,et al.  Integrating calcium looping CO2 capture with the manufacture of cement , 2013 .

[11]  Juan Adánez,et al.  Calcination of calcium-based sorbents at pressure in a broad range of CO2 concentrations , 2002 .

[12]  Gemma Grasa,et al.  Modelling the continuous calcination of CaCO3 in a Ca-looping system , 2013 .

[13]  A. Sánchez-Biezma,et al.  Demonstration of steady state CO2 capture in a 1.7 MWth Calcium looping pilot , 2013 .

[14]  Douglas P. Harrison,et al.  Hydrogen Production Using Sorption-Enhanced Reaction , 2001 .

[15]  Jose Manuel Valverde,et al.  Constant rate thermal analysis for enhancing the long-term CO2 capture of CaO at Ca-looping conditions , 2013 .

[16]  J. Valverde,et al.  Role of Looping-Calcination Conditions on Self-Reactivation of Thermally Pretreated CO2 Sorbents Based on CaO , 2013 .

[17]  Thumrongrut Mungcharoen,et al.  Development of synthetic CaO sorbents via CTAB-assisted sol–gel method for CO2 capture at high temperature , 2014 .

[18]  Roberta Pacciani,et al.  CaO-based CO2 sorbents: from fundamentals to the development of new, highly effective materials. , 2013, ChemSusChem.

[19]  A. Sánchez-Biezma,et al.  Postcombustion CO2 capture with CaO. Status of the technology and next steps towards large scale demonstration , 2011 .

[20]  Bo Feng,et al.  High-Temperature Pressure Swing Adsorption Process for CO2 Separation , 2012 .

[21]  F. Boey,et al.  Progress in synthesis of ferroelectric ceramic materials via high-energy mechanochemical technique , 2008 .

[22]  Panagiotis Grammelis,et al.  Integration of calcium looping technology in existing cement plant for CO2 capture: Process modeling and technical considerations , 2015 .

[23]  Lei Ge,et al.  Calcium looping for CO2 capture at a constant high temperature , 2014 .

[24]  J. C. Abanades,et al.  Heat requirements in a calciner of CaCO3 integrated in a CO2 capture system using CaO , 2008 .

[25]  L. Romeo,et al.  Integration of Carbonate CO2 Capture Cycle and Coal-Fired Power Plants. A Comparative Study for Different Sorbents , 2010 .

[26]  Jose Manuel Valverde,et al.  Calcium-looping for post-combustion CO2 capture. On the adverse effect of sorbent regeneration under CO2 , 2014 .

[27]  De Chen,et al.  Process design simulation of H2 production by sorption enhanced steam methane reforming: evaluation of potential CO2 acceptors , 2007 .

[28]  L. Barelli,et al.  Hydrogen production through sorption-enhanced steam methane reforming and membrane technology : A review , 2008 .

[29]  Susan E.B. Edwards,et al.  Calcium looping in solar power generation plants , 2012 .

[30]  N. Cai,et al.  Rate Equation Theory for the Carbonation Reaction of CaO with CO2 , 2012 .

[31]  Robin W. Hughes,et al.  Sintering and Reactivity of CaCO3-Based Sorbents for In Situ CO2 Capture in Fluidized Beds under Realistic Calcination Conditions , 2009 .

[32]  Jose Manuel Valverde,et al.  Role of crystal structure on CO2 capture by limestone derived CaO subjected to carbonation/recarbonation/calcination cycles at Ca-looping conditions , 2014 .

[33]  Borja Arias,et al.  Post-combustion calcium looping process with a highly stable sorbent activity by recarbonation , 2012 .

[34]  Fabio Montagnaro,et al.  Fluidized bed calcium looping cycles for CO2 capture under oxy-firing calcination conditions: Part 2. Assessment of dolomite vs. limestone , 2013 .

[35]  Juan Carlos Abanades,et al.  Enhancement of CaO for CO2 capture in an FBC environment , 2003 .

[36]  Paolo Chiesa,et al.  Application of the Sorption Enhanced-Steam Reforming process in combined cycle-based power plants , 2011 .

[37]  P. Baláž.  Mechanochemistry in Nanoscience and Minerals Engineering , 2008 .

[38]  Juan Carlos Abanades,et al.  Integration of a Ca looping system for CO2 capture in existing power plants , 2011 .

[39]  Richard S. Middleton,et al.  The complex future of CO2 capture and storage: Variable electricity generation and fossil fuel power , 2013 .

[40]  Calin-Cristian Cormos,et al.  Economic evaluations of coal-based combustion and gasification power plants with post-combustion CO2 capture using calcium looping cycle , 2014 .

[41]  Nicholas H. Florin,et al.  Enhanced hydrogen production from biomass with in situ carbon dioxide capture using calcium oxide sorbents , 2008 .

[42]  Hartmut Spliethoff,et al.  Assessment of oxy-fuel, pre- and post-combustion-based carbon capture for future IGCC plants , 2012 .

[43]  Nils Henrik Eldrup,et al.  Techno-economical study of the Zero Emission Gas power concept , 2011 .

[44]  Jose Manuel Valverde,et al.  Role of precalcination and regeneration conditions on postcombustion CO2 capture in the Ca-looping technology , 2014 .

[45]  D. Beruto,et al.  Effect of mixtures of H2O (g) and CO2 (g) on the thermal half decomposition of dolomite natural stone in high CO2 pressure regime , 2003 .

[46]  Chin-Ming Huang,et al.  Design and Experimental Investigation of Calcium Looping Process for 3‐kWth and 1.9‐MWth Facilities , 2013 .

[47]  Wim G. Haije,et al.  Calcium oxide for CO2 capture: Operational window and efficiency penalty in sorption-enhanced steam methane reforming , 2009 .

[48]  Fabio Montagnaro,et al.  Spent limestone sorbent from calcium looping cycle as a raw material for the cement industry , 2014 .

[49]  Jaakko Ylätalo,et al.  Modeling of the oxy-combustion calciner in the post-combustion calcium looping process , 2013 .

[50]  Karl O. Albrecht,et al.  Development of a CaO-based CO2 sorbent with improved cyclic stability , 2008 .

[51]  Pilar Lisbona,et al.  Operation of a cyclonic preheater in the Ca-looping for CO2 capture. , 2013, Environmental science & technology.

[52]  Liang-Shih Fan,et al.  Process simulation and economic analysis of the Calcium Looping Process (CLP) for hydrogen and electricity production from coal and natural gas , 2013 .

[53]  R. Blom,et al.  The use of in situ powder X-ray diffraction in the investigation of dolomite as a potential reversible high-temperature CO2 sorbent. , 2005, Physical chemistry chemical physics : PCCP.

[54]  Rahul Anantharaman,et al.  Post-combustion CO2 capture from a natural gas combined cycle by CaO/CaCO3 looping , 2012 .

[55]  D. Harrison.  Sorption-Enhanced Hydrogen Production: A Review , 2008 .

[56]  Borja Arias,et al.  Design of a Novel Fluidized Bed Reactor To Enhance Sorbent Performance in CO2 Capture Systems Using CaO , 2014 .

[57]  E. Attiogbe,et al.  Thermal decomposition of dolomite and the extraction of its constituents , 1997 .

[58]  Luis M. Romeo,et al.  Operation of a Mixing Seal Valve in Calcium Looping for CO2 Capture , 2014 .

[59]  Luis M. Romeo,et al.  A systematic approach for high temperature looping cycles integration , 2014 .

[60]  Craig Hawthorne,et al.  Simulation of the carbonate looping power cycle , 2009 .

[61]  J. Valverde,et al.  Limestone Calcination Nearby Equilibrium: Kinetics, CaO Crystal Structure, Sintering and Reactivity , 2015 .

[62]  Yingjie Li,et al.  CO2 capture performance of calcium-based sorbent doped with manganese salts during calcium looping cycle , 2012 .

[63]  Lifeng Zhao,et al.  Investigation of natural CaO–MgO sorbent for CO2 capture , 2013 .

[64]  M. Romano.  Modeling the carbonator of a Ca-looping process for CO2 capture from power plant flue gas , 2012 .

[65]  E. J. Anthony,et al.  Investigating the Use of CaO/CuO Sorbents for in Situ CO2 Capture in a Biomass Gasifier , 2015 .

[66]  E. Tzimas,et al.  Assessment of CO2 Capture Technologies in Cement Manufacturing Process , 2012 .

[67]  Dawid P. Hanak,et al.  A review of developments in pilot-plant testing and modelling of calcium looping process for CO2 capture from power generation systems , 2015 .

[68]  D. Beruto,et al.  Microstructure, kinetic, structure, thermodynamic analysis for calcite decomposition: free-surface and powder bed experiments , 2004 .

[69]  C. Cormos.  Economic implications of pre- and post-combustion calcium looping configurations applied to gasification power plants , 2014 .

[70]  Borja Arias,et al.  Experimental Validation of the Calcium Looping CO2 Capture Process with Two Circulating Fluidized Bed Carbonator Reactors , 2011 .

[71]  Robin W. Hughes,et al.  Combined calcium looping and chemical looping combustion cycles with CaO–CuO pellets in a fixed bed reactor , 2015 .

[72]  J. C. Abanades,et al.  Capturing CO2 from combustion flue gases with a carbonation calcination loop. Experimental results and process development , 2009 .

[73]  L. Pérez-Maqueda,et al.  Kinetics of the Initial Stage of Sintering from Shrinkage Data: Simultaneous Determination of Activation Energy and Kinetic Model from a Single Nonisothermal Experiment , 2004 .

[74]  Liang-Shih Fan,et al.  Ionic diffusion through Calcite (CaCO3) layer during the reaction of CaO and CO2 , 2012 .

[75]  P. Fennell,et al.  Investigation into potential synergy between power generation, cement manufacture and CO2 abatement using the calcium looping cycle , 2011 .

[76]  J. Carlos Abanades,et al.  The impact of calcium sulfate and inert solids accumulation in post-combustion calcium looping systems , 2013 .

[77]  G Grasa,et al.  New CO2 capture process for hydrogen production combining Ca and Cu chemical loops. , 2010, Environmental science & technology.

[78]  P. Salatino,et al.  A comparative characterization study of Ca-looping natural sorbents , 2013 .

[79]  D. P. Harrison,et al.  CHARACTERISTICS OF THE REVERSIBLE REACTION BETWEEN CO2(g) AND CALCINED DOLOMITE , 1996 .

[80]  Ningsheng Cai,et al.  Effect of Temperature on the Carbonation Reaction of CaO with CO2 , 2012 .

[81]  Luis M. Romeo,et al.  Economical assessment of competitive enhanced limestones for CO2 capture cycles in power plants , 2009 .

[82]  Jochen Ströhle,et al.  Feasibility study on the carbonate looping process for post-combustion CO2 capture from coal-fired power plants , 2009 .

[83]  Luis M. Romeo,et al.  Design and analysis of heat exchanger networks for integrated Ca-looping systems , 2013 .

[84]  Stefano Brandani,et al.  Process integration of a Ca-looping carbon capture process in a cement plant , 2013 .

[85]  Yongping Yang,et al.  Integration and evaluation of a power plant with a CaO-based CO2 capture system , 2010 .

[86]  Robert H. Borgwardt,et al.  Sintering of nascent calcium oxide , 1989 .

[87]  J. Carlos Abanades,et al.  Pore-Size and Shape Effects on the Recarbonation Performance of Calcium Oxide Submitted to Repeated Calcination/Recarbonation Cycles , 2005 .

[88]  Panagiotis Grammelis,et al.  Calcium looping for CO2 capture from a lignite fired power plant , 2013 .

[89]  V. Manović,et al.  CO2 looping cycles with CaO-based sorbent pretreated in CO2 at high temperature , 2009 .

[90]  Robert H. Borgwardt,et al.  Calcium oxide sintering in atmospheres containing water and carbon dioxide , 1989 .

[91]  Rowena Ball,et al.  Entropy generation analyses of Endex and conventional calcium looping processes for CO2 capture , 2014 .

[92]  J Carlos Abanades,et al.  CO₂ capture from cement plants using oxyfired precalcination and/or calcium looping. , 2012, Environmental science & technology.

[93]  B. R. Stanmore,et al.  Review—calcination and carbonation of limestone during thermal cycling for CO2 sequestration , 2005 .

[94]  C. Müller,et al.  Performance of a Novel Synthetic Ca-Based Solid Sorbent Suitable for Desulfurizing Flue Gases in a Fluidized Bed , 2009, Industrial & Engineering Chemistry Research.

[95]  Yingjie Li,et al.  Utilization of lime mud from paper mill as CO2 sorbent in calcium looping process , 2013 .

[96]  Paul S. Fennell,et al.  The calcium looping cycle for large-scale CO2 capture , 2010 .

[97]  Brent H. Shanks,et al.  Improving the Stability of a CaO-Based Sorbent for CO 2 by Thermal Pretreatment , 2011 .

[98]  A. Kronenberg,et al.  Carbon and oxygen diffusion in calcite: Effects of Mn content and PH2O , 1984 .

[99]  L. Fan,et al.  Calcium Looping Process (CLP) for Enhanced Noncatalytic Hydrogen Production with Integrated Carbon Dioxide Capture , 2010 .

[100]  Konstantinos M. Paraskevopoulos,et al.  The effects of procedural variables on the maximum capture efficiency of CO2 using a carbonation/calcination cycle of carbonate rocks , 2005 .

[101]  C. Rodriguez-Navarro,et al.  The mechanism of thermal decomposition of dolomite: New insights from 2D-XRD and TEM analyses , 2012 .

[102]  M. Lorenzo,et al.  Precalcination of CaCO3 as a Method to Stabilize CaO Performance for CO2 Capture from Combustion Gases , 2011 .

[103]  J. Carlos Abanades,et al.  Determination of the Critical Product Layer Thickness in the Reaction of CaO with CO2 , 2005 .

[104]  J. Valverde,et al.  Effect of Heat Pretreatment/Recarbonation in the Ca-Looping Process at Realistic Calcination Conditions , 2014 .

[105]  Luis M. Romeo,et al.  Reduction of greenhouse gas emissions by integration of cement plants, power plants, and CO2 capture systems , 2011 .

[106]  Yong-Ki Park,et al.  A solid sorbent-based multi-stage fluidized bed process with inter-stage heat integration as an energy efficient carbon capture process , 2014 .

[107]  A. West,et al.  Single phase, electrically insulating, multiferroic La-substituted BiFeO3 prepared by mechanosynthesis , 2014 .

[108]  P. Heitjans,et al.  Fast diffusion in nanocrystalline ceramics prepared by ball milling , 2004 .

[109]  Xuelei Zhang,et al.  Performance assessment of CO2 capture with calcination carbonation reaction process driven by coal and concentrated solar power , 2014 .

[110]  M. E. Diego,et al.  Biomass combustion with in situ CO2 capture by CaO in a 300 kWth circulating fluidized bed facility , 2014 .

[111]  Borja Arias,et al.  An analysis of the effect of carbonation conditions on CaO deactivation curves , 2011 .

[112]  C. Suryanarayana,et al.  Mechanical alloying and milling , 2004 .

[113]  M. Pijolat,et al.  Mechanism of growth of MgO and CaCO3 during a dolomite partial decomposition , 2007 .

[114]  Rudolph Blum,et al.  High-efficiency coal-fired power plants development and perspectives , 2006 .

[115]  Chunzhen Qiao,et al.  System Design and Analysis of a Direct Hydrogen from Coal System with CO2 Capture , 2007 .

[116]  Juan Carlos Abanades,et al.  Determination of CaO carbonation kinetics under recarbonation conditions , 2014 .

[117]  Jochen Ströhle,et al.  Carbonate looping experiments in a 1 MWth pilot plant and model validation , 2014 .

[118]  D. Beruto,et al.  CO2‐Catalyzed Surface Area and Porosity Changes in High‐Surface‐Area CaO Aggregates , 2006 .

[119]  Johannes Khinast,et al.  Decomposition of limestone: The influence of CO2 and particle size on the reaction rate , 1996 .

[120]  Stefano Consonni,et al.  The Calcium Looping Process for Low CO2 Emission Cement Plants , 2014 .

[121]  E. J. Anthony,et al.  Fluidized bed combustion systems integrating CO2 capture with CaO. , 2005, Environmental science & technology.

[122]  Mónica Alonso,et al.  Application of the random pore model to the carbonation cyclic reaction , 2009 .

[123]  A. Sánchez-Biezma,et al.  Oxyfuel carbonation/calcination cycle for low cost CO2 capture in existing power plants , 2008 .

[124]  Vasilije Manovic,et al.  Integration of calcium and chemical looping combustion using composite CaO/CuO-based materials. , 2011, Environmental science & technology.

[125]  L. Romeo,et al.  Optimizing make-up flow in a CO2 capture system using CaO , 2009 .

[126]  J. Valverde,et al.  CO2 multicyclic capture of pretreated/doped CaO in the Ca-looping process. Theory and experiments. , 2013, Physical chemistry chemical physics : PCCP.

[127]  Jose Manuel Valverde,et al.  Ca-looping for postcombustion CO2 capture: A comparative analysis on the performances of dolomite and limestone , 2015 .

[128]  B. Moghtaderi.  Review of the Recent Chemical Looping Process Developments for Novel Energy and Fuel Applications , 2012 .

[129]  T. Anderson.  Self-diffusion of carbon and oxygen in calcite by isotope exchange with carbon dioxide , 1969 .

[130]  M. Sceats,et al.  Separation of carbon dioxide from flue emissions using Endex principles , 2009, 0911.5441.

[131]  J. Valverde,et al.  Relevant influence of limestone crystallinity on CO₂ capture in the Ca-looping technology at realistic calcination conditions. , 2014, Environmental science & technology.

[132]  Rahul Anantharaman,et al.  NGCC post-combustion CO2 capture with Ca/carbonate looping: Efficiency dependency on sorbent properties, capture unit performance and process configuration , 2014 .

[133]  Loïc Favergeon,et al.  CO2 adsorption on calcium oxide: An atomic-scale simulation study , 2012 .

[134]  Paolo Chiesa,et al.  Hydrogen production through sorption enhanced steam reforming of natural gas: Thermodynamic plant assessment , 2013 .

[135]  Juan Carlos Abanades,et al.  Comparison of experimental results from three dual fluidized bed test facilities capturing CO2 with CaO , 2011 .

[136]  Alissa Cotton,et al.  Novel Optimized Process for Utilization of CaO-Based Sorbent for Capturing CO2 and SO2 Sequentially , 2012 .

[137]  Antonio Valero,et al.  Exergy analysis as a tool for the integration of very complex energy systems: The case of carbonation/calcination CO2 systems in existing coal power plants , 2010 .

[138]  Jose Manuel Valverde,et al.  Multicyclic conversion of limestone at Ca-looping conditions: The role of solid-sate diffusion controlled carbonation , 2014 .

[139]  N. Murafa,et al.  Direct mechanosynthesis of pure BiFeO3 perovskite nanoparticles: reaction mechanism , 2013 .

[140]  D. Dollimore,et al.  Thermal analysis of ground dolomite, confirmation of results using an X-ray powder diffraction methodology , 2001 .

[141]  Luis M. Romeo,et al.  Enhanced coal gasification heated by unmixed combustion integrated with an hybrid system of SOFC/GT , 2008 .

[142]  Stephen C. Parker,et al.  Atomistic Simulation of Surface Selectivity on Carbonate Formation at Calcium and Magnesium Oxide Surfaces , 2012 .

[143]  Liang-Shih Fan,et al.  Energy penalty of CO2 capture for the Carbonation–Calcination Reaction (CCR) Process: Parametric effects and comparisons with alternative processes , 2013 .

[144]  Juan Carlos Abanades,et al.  Economics of CO2 Capture Using the Calcium Cycle with a Pressurized Fluidized Bed Combustor , 2007 .

[145]  E. J. Anthony,et al.  Capture of CO2 from combustion gases in a fluidized bed of CaO , 2004 .

[146]  C. Müller,et al.  Capture of CO2 Using Sorbents of Calcium Magnesium Acetate (CMA) , 2010 .

[147]  E. J. Anthony,et al.  A study on the activity of CaO-based sorbents for capturing CO2 in clean energy processes , 2010 .

[148]  Paul S. Fennell,et al.  The calcium looping cycle for CO2 capture from power generation, cement manufacture and hydrogen production , 2011 .

[149]  Yong Wang,et al.  The effects of steam and carbon dioxide on calcite decomposition using dynamic X-ray diffraction , 1995 .

[150]  J. Carlos Abanades,et al.  CO2 Capture Capacity of CaO in Long Series of Carbonation/Calcination Cycles , 2006 .

[151]  Andrea Ramírez,et al.  Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes , 2012 .

[152]  Milton E. Wadsworth,et al.  Calcium Carbonate Decomposition in Carbon Dioxide Atmosphere , 1958 .

[153]  A. W. Haul,et al.  Differential thermal analysis of the dolomite decomposition , 1952 .

[154]  Changsui Zhao,et al.  CO2 capture and attrition performance of CaO pellets with aluminate cement under pressurized carbonation , 2012 .

[155]  Luis M. Romeo,et al.  Energy penalty reduction in the calcium looping cycle , 2012 .

[156]  Ana-Maria Cormos,et al.  Assessment of CO2 capture by calcium looping (CaL) process in a flexible power plant operation scenario , 2015 .

[157]  Vasilije Manovic,et al.  Influence of calcination conditions on carrying capacity of CaO-based sorbent in CO2 looping cycles , 2009 .

[158]  J. Ritvanen,et al.  Model based scale-up study of the calcium looping process , 2014 .

[159]  Dermot J. Roddy,et al.  Development of a CO2 network for industrial emissions , 2012 .

[160]  R. Ball.  Using the second law first: Improving the thermodynamic efficiency of carbon dioxide separation from gas streams in an Endex calcium looping system , 2015 .

[161]  D. D. Perlmutter,et al.  Effect of the product layer on the kinetics of the CO2‐lime reaction , 1983 .