Effect of combined aluminum-silicon synergistic impregnation and heat treatment on the thermal stability, chemical components, and morphology of wood

Wood is flammable and consumes a lot of energy during processing. To improve this material, wood was pretreated via aluminum sulfate–sodium silicate synergistic impregnation combined with heat treatment. The wood before and after pretreatment was analyzed through the solids weight changes, thermogravimetric and differential thermogravimetric analyses, somke density, scanning electron microscopy, and Fourier-transform infrared spectroscopy. The experimental results showed that the combined treatment could reduce the energy consumption of the heat treatment by catalyzed thermal degradation with aluminum-silicon synergistic impregnation. This procedure improved the thermal stability of the wood. Meanwhile, the combined treatment resolved the problem of increased smoke release caused by the impregnation of aluminum sulfate–sodium silicate modification reagents.

[1]  Qingfeng Sun,et al.  Author Correction: The properties of fibreboard based on nanolignocelluloses/CaCO3/PMMA composite synthesized through mechano-chemical method , 2018, Scientific Reports.

[2]  F. Favier,et al.  Molecular recognition of wood polyphenols by phase II detoxification enzymes of the white rot Trametes versicolor , 2018, Scientific Reports.

[3]  Takashi Watanabe,et al.  Direct evidence for α ether linkage between lignin and carbohydrates in wood cell walls , 2018, Scientific Reports.

[4]  Taian Chen,et al.  Characterization of Wood Surface Elemental Compositions after Thermo-vacuum Treatment and Superheated-steam Heat Treatment , 2018 .

[5]  Qi Wang,et al.  Acid-base synergistic flame retardant wood pulp paper with high thermal stability. , 2017, Carbohydrate polymers.

[6]  Jinzhen Cao,et al.  Characteristics of wood-silica composites influenced by the pH value of silica sols , 2017 .

[7]  E. Uetimane,et al.  Comparative Study of Two Softwood Species Industrially Modified by Thermowood® and Thermo-Vacuum Process , 2017 .

[8]  Min Chul Lee,et al.  Fire Properties of Pinus densiflora Utilizing Fire-retardant Chemicals Based on Borate and Phosphorus (II) – Thermal and Gas Emission Characteristics , 2017 .

[9]  Reza Hosseinpourpia,et al.  Effects of Acid Pre-Treatments on the Swelling and Vapor Sorption of Thermally Modified Scots Pine (Pinus sylvestris L.) Wood , 2017 .

[10]  N. Zhang,et al.  Combined effects of ZnO particle deposition and heat treatment on dimensional stability and mechanical properties of poplar wood , 2017, Scientific Reports.

[11]  Nam-Hun Kim,et al.  Effect of mechanical restraint on drying defects reduction in heat-treated okan wood , 2017, BioResources.

[12]  Yandan Chen,et al.  Effect of silicone oil heat treatment on the chemical composition, cellulose crystalline structure and contact angle of Chinese parasol wood. , 2017, Carbohydrate polymers.

[13]  N. Imtiaz,et al.  The removal of COD, TSS and colour of black liquor by coagulation–flocculation process at optimized pH, settling and dosing rate , 2017 .

[14]  M. Dubois,et al.  The effect of lignin on the reactivity of natural fibres towards molecular fluorine , 2017 .

[15]  J. M. Chimenos,et al.  Epsomite as flame retardant treatment for wood: Preliminary study , 2016 .

[16]  G. Daniel,et al.  Decay resistance of softwoods and hardwoods thermally modified by the Thermovouto type thermo-vacuum process to brown rot and white rot fungi , 2016 .

[17]  Jinzhen Cao,et al.  Incorporation of microencapsulated dodecanol into wood flour/high-density polyethylene composite as a phase change material for thermal energy storage , 2016 .

[18]  M. Humar,et al.  Thermal modification of wax-impregnated wood to enhance its physical, mechanical, and biological properties , 2016 .

[19]  Dayong Ding,et al.  Microstructural and Topochemical Characterization of Thermally Modified Poplar (Populus cathayaha) Cell Wall , 2015 .

[20]  M. Wålinder,et al.  Wettability of oil heat-treated bamboo and bonding strength of laminated bamboo board , 2015 .

[21]  C. Gallis,et al.  Properties of ultrasound extracted bicomponent lignocellulose thin films. , 2015, Ultrasonics sonochemistry.

[22]  H. Park,et al.  Fire Retardant Performance and Thermal Degradation of Korean Pine Treated with Fire Retardant Chemical , 2015 .

[23]  Robert H. White,et al.  Reinforced hybrid wood-aluminum composites with excellent fire performance , 2015 .

[24]  T. R. Hull,et al.  Flammability behaviour of wood and a review of the methods for its reduction , 2013 .

[25]  Z. Candan,et al.  Effect of thermal modification by hot pressing on performance properties of paulownia wood boards , 2013 .

[26]  Liang Yong-shen Preparation and Properties of Flame-retardant Bitumen with Aluminium Trihydroxide/Montmorillonite , 2013 .

[27]  Carlos A. Giudice,et al.  Nano lithium silicates as flame-retardant impregnants for Pinus radiata , 2011 .

[28]  Jasna S. Stevanic,et al.  FT-IR imaging microscopy to localise and characterise simultaneous and selective white-rot decay within spruce wood cells , 2011 .

[29]  Jixing Xie,et al.  Investigation on the thermal decomposition and flame retardancy of wood treated with a series of molybdates by TG–MS , 2011 .

[30]  D. Yadav,et al.  Treatment of paper and pulp mill effluent by coagulation , 2010, Environmental technology.

[31]  A. M. Pereyra,et al.  Flame-retardant impregnants for woods based on alkaline silicates , 2009 .

[32]  Sun Yongming Kinetics of Pyrolysis and Metal-salt Catalized Pyrolysis of Wood , 2008 .

[33]  A. Temiz,et al.  Weathering, water absorption, and durability of silicon, acetylated, and heat‐treated wood , 2006 .

[34]  Deng Gui-lin The application of flame retardant in paper industry , 2006 .

[35]  M. Sain,et al.  Bioprocess preparation of wheat straw fibers and their characterization , 2006 .

[36]  D. Himmelsbach,et al.  The use of FT-IR microspectroscopic mapping to study the effects of enzymatic retting of flax (Linum usitatissimum L) stems† , 2002 .

[37]  Zhou Ping,et al.  Combination of Populus tomentosa wood and inorganic substances. , 2000 .