Theoretical and experimental investigation of core-separated buckling-restrained braces

Abstract Buckling behavior and hysteretic performance of a new type of buckling-restrained brace (BRB), namely core-separated buckling-restrained brace (CSBRB), are theoretically and experimentally investigated. The material utilization efficiency of the CSBRB is significantly improved compared with common BRB, since its cross-section spreads outwards by spacing two cores, thus improving the flexural rigidity of the restraining system. On the basis of the elastic buckling loads of pin-ended CSBRBs, a design procedure involving two design parameters, namely normalized slenderness and buckling factor, is firstly established. Then, hysteretic behavior of CSBRBs is investigated by FE nonlinear analysis to obtain the critical normalized slenderness. Finally, test results of four specimens with different normalized slenderness values are presented to reveal the hysteretic characteristics and the energy-dissipation abilities, concluding that a CSBRB with adequate restraining rigidity can provide stable hysteretic performance. The test results coincide well with the results obtained from refined FE numerical analyses.

[1]  Chia-Ming Uang,et al.  Reducing residual drift of buckling-restrained braced frames as a dual system , 2006 .

[2]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[3]  Chung-Che Chou,et al.  Subassemblage tests and finite element analyses of sandwiched buckling-restrained braces , 2010 .

[4]  E. Gaylord,et al.  Design of Steel Structures , 1972 .

[5]  J. Chaboche.  Constitutive equations for cyclic plasticity and cyclic viscoplasticity , 1989 .

[6]  Hang Chen,et al.  Critical load and application of core-separated buckling-restrained braces , 2015 .

[7]  Kailai Deng,et al.  Development of crawler steel damper for bridges , 2013 .

[8]  V Kalyanaraman,et al.  Core loaded earthquake resistant bracing system , 1998 .

[9]  Jinkoo Kim,et al.  Component tests of buckling-restrained braces with unconstrained length , 2009 .

[10]  Francesco Genna,et al.  Analysis of the Lateral Thrust in Bolted Steel Buckling-Restrained Braces. II: Engineering Analytical Estimates , 2012 .

[11]  Robert Tremblay,et al.  Seismic testing and performance of buckling- restrained bracing systems , 2006 .

[12]  Dawn E. Lehman,et al.  Experimental evaluation of cyclically loaded, large-scale, planar and 3-d buckling-restrained braced frames , 2014 .

[13]  Francesco Genna,et al.  Analysis of the Lateral Thrust in Bolted Steel Buckling-Restrained Braces. I: Experimental and Numerical Results , 2012 .

[14]  Jinkoo Kim,et al.  BEHAVIOR AND DESIGN OF STRUCTURES WITH BUCKLING-RESTRAINED BRACES , 2004 .

[15]  J. Chaboche.  Time-independent constitutive theories for cyclic plasticity , 1986 .

[16]  Stephen A. Mahin,et al.  Seismic demands on steel braced frame buildings with buckling-restrained braces , 2003 .

[17]  B. Rafezy,et al.  Overall buckling behavior of all-steel buckling restrained braces , 2012 .

[18]  Pennung Warnitchai,et al.  Energy-based seismic strengthening design of non-ductile reinforced concrete frames using buckling-restrained braces , 2014 .