Sensorless control with two types of pulsating high frequency signal injection methods for SPMSM at low speed

Two types of pulsating high frequency signal injection control of surface mounted permanent magnet synchronous motor (SPMSM) — pulsating high frequency voltage injection method and pulsating high frequency current injection method are studied at zero and very low speeds in the paper. The basic principle of pulsating voltage injection is analyzed in detail, and the rotor position and speed estimation system is designed to make improvements. On this basis, a novel sensorless control method based on pulsating current signal injection is proposed in this paper. The two methods are compared by theoretical analysis and simulation. The simulation results indicate that the rotor position and speed can be obtained exactly at low and zero speed by both of the methods, and the method of pulsating current injection is more simple and stable.

[1]  E. Robeischl,et al.  Optimized INFORM measurement sequence for sensorless PM synchronous motor drives with respect to minimum current distortion , 2002, IEEE Transactions on Industry Applications.

[2]  K.Y. Lee,et al.  Electric propulsion with the sensorless permanent magnet synchronous motor: model and approach , 2005, IEEE Transactions on Energy Conversion.

[3]  Robert D. Lorenz,et al.  Carrier Signal Selection for Sensorless Control of PM Synchronous Machines at Zero and Very Low Speeds , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[4]  M.F. Rahman,et al.  Low-Speed and Standstill Operation of a Sensorless Direct Torque and Flux Controlled IPM Synchronous Motor Drive , 2010, IEEE Transactions on Energy Conversion.

[5]  A. Piippo,et al.  Signal Injection in Sensorless PMSM Drives Equipped With Inverter Output Filter , 2008, IEEE Transactions on Industry Applications.

[6]  P. Garcia,et al.  Modeling and Adaptive Decoupling of High-Frequency Resistance and Temperature Effects in Carrier-Based Sensorless Control of PM Synchronous Machines , 2010, IEEE Transactions on Industry Applications.

[7]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[8]  S. Sul,et al.  Sensorless drive of surface-mounted permanent-magnet motor by high-frequency signal injection based on magnetic saliency , 2003 .

[9]  F.M.L. De Belie,et al.  A Sensorless Drive by Applying Test Pulses Without Affecting the Average-Current Samples , 2010, IEEE Transactions on Power Electronics.

[10]  Zheng Zhang,et al.  Sliding-Mode Sensorless Control of Direct-Drive PM Synchronous Motors for Washing Machine Applications , 2009, IEEE Transactions on Industry Applications.

[11]  Seung-Ki Sul,et al.  Initial rotor position estimation of an interior permanent magnet synchronous machine using carrier-frequency injection methods , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[12]  Longya Xu,et al.  Eddy Current Effects on Rotor Position Estimation and Magnetic Pole Identification of PMSM at Zero and Low Speeds , 2008, IEEE Transactions on Power Electronics.

[13]  R. D. Lorenz,et al.  Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speeds , 1998 .

[14]  S. Shinnaka.  New sensorless vector control using minimum-order flux state observer in a stationary reference frame for permanent-magnet synchronous motors , 2006, IEEE Transactions on Industrial Electronics.

[15]  Gilbert Hock Beng Foo,et al.  Direct Torque Control of an IPM-Synchronous Motor Drive at Very Low Speed Using a Sliding-Mode Stator Flux Observer , 2010, IEEE Transactions on Power Electronics.

[16]  Jung-Ik Ha,et al.  Sensorless rotor position estimation of an interior permanent-magnet motor from initial states , 2003 .

[17]  Rosario Miceli,et al.  Back EMF Sensorless-Control Algorithm for High-Dynamic Performance PMSM , 2010, IEEE Transactions on Industrial Electronics.

[18]  Longya Xu,et al.  Sliding-Mode Sensorless Control of Direct-Drive PM Synchronous Motors for Washing Machine Applications , 2009 .

[19]  F. Blaabjerg,et al.  Combined Flux Observer With Signal Injection Enhancement for Wide Speed Range Sensorless Direct Torque Control of IPMSM Drives , 2008, IEEE Transactions on Energy Conversion.

[20]  Johann W. Kolar,et al.  Robust Angle-Sensorless Control of a PMSM Bearingless Pump , 2009, IEEE Transactions on Industrial Electronics.

[21]  J. Luomi,et al.  Sensorless control of surface magnet synchronous motors at low speeds using low-frequency signal injection , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[22]  Muhammed Fazlur Rahman,et al.  Sensorless Direct Torque and Flux-Controlled IPM Synchronous Motor Drive at Very Low Speed Without Signal Injection , 2010, IEEE Transactions on Industrial Electronics.