Virtual material parameter acquisition based on the basic characteristics of the bolt joint interfaces

[1]  K. Komvopoulos,et al.  A Fractal Theory of the Interfacial Temperature Distribution in the Slow Sliding Regime: Part I—Elastic Contact and Heat Transfer Analysis , 1994 .

[2]  Y. Ren,et al.  Identification of ’Effective’ Linear Joints Using Coupling and Joint Identification Techniques , 1998 .

[3]  Bradley Alan Bunyard.  Effects of bolt threads on the stiffness of bolted joints and bolt thread and head fillet stress concentration factors , 1999 .

[4]  Y. M. Huang,et al.  Experimental Investigation of Dynamic Normal Characteristics of Machined Joint Surfaces , 2000 .

[5]  I. Green,et al.  A Finite Element Study of Elasto-Plastic Hemispherical Contact Against a Rigid Flat , 2005 .

[6]  M. Böswald,et al.  Identification of Non-linear Joint Parameters by using Frequency Response Residuals , 2005 .

[7]  Pauli Pedersen,et al.  A Direct analysis of elastic contact using super elements , 2006 .

[8]  Jeong Kim,et al.  Finite element analysis and modeling of structure with bolted joints , 2007 .

[9]  Niels Leergaard Pedersen,et al.  Bolt-plate contact assemblies with prestress and external loads: Solved with super element technique , 2009 .

[10]  Tom Gray,et al.  Analysis of externally loaded bolted joints: Analytical, computational and experimental study , 2009 .

[11]  R. Dwyer-Joyce,et al.  Asperity Creep Measured by the Reflection of Ultrasound at Rough Surface Contact , 2009 .

[12]  Raju Sethuraman,et al.  Finite Element Based Member Stiffness Evaluation of Axisymmetric Bolted Joints , 2009 .

[13]  Shuyun Jiang,et al.  A Contact Stiffness Model of Machined Plane Joint Based on Fractal Theory , 2010 .

[14]  Peihua Gu,et al.  A new dynamic modeling approach to fixed joint interface in machine tools , 2010, 2010 International Conference on Mechanical and Electrical Technology.

[15]  Xiao Ren.  Gas Sealing Performance Study of Rough Surface , 2010 .

[16]  Zhijun Wu,et al.  Nonlinear Deformation Behavior of Clamped Bolted Joints Under a Separating Service Load , 2011 .

[17]  Josu Aguirrebeitia,et al.  A Tetraparametric Metamodel for the Analysis and Design of Bolting Sequences for Wind Generator Flanges , 2011 .

[18]  Xiaolei Huang,et al.  A new method of virtual material hypothesis-based dynamic modeling on fixed joint interface in machine tools , 2011 .

[19]  Yu Luan,et al.  A simplified nonlinear dynamic model for the analysis of pipe structures with bolted flange joints , 2012 .

[20]  Zhijun Wu,et al.  Nonlinear Behavior of Preloaded Bolted Joints Under a Cyclic Separating Load , 2012 .

[21]  Sayed A. Nassar,et al.  A Proposed Model for Predicting Clamp Load Loss Due to Gasket Creep Relaxation in Bolted Joints , 2012 .

[22]  G. Carbone,et al.  The influence of the statistical properties of self-affine surfaces in elastic contacts: A numerical investigation , 2012 .

[23]  Jun Hong,et al.  Three-dimensional finite element analysis of the mechanical properties of helical thread connection , 2013 .

[24]  D. Adams,et al.  Experimental Investigation of the Effects of Bolt Preload on the Dynamic Response of a Bolted Interface , 2013 .

[25]  Wei Chen,et al.  Elasto-plastic indentation of a half-space by a rigid sphere under normal and torque loading , 2013 .

[26]  Zhang Xueliang,et al.  Tangential Damping and its Dissipation Factor Models of Joint Interfaces Based on Fractal Theory With Simulations , 2014 .

[27]  Tai Wei Loy.  Finite element analysis of bolted joints , 2016 .