Prediction and Modeling of Thin Gate Oxide Breakdown Subject to Arbitrary Transient Stresses

A reliable dielectric breakdown model under transient stresses via an extension of the power law is demonstrated. The model, which is based on the percolation model and the assumption of no significant detrapping, is successfully used in ramped voltage stress breakdown analysis. A demonstration of the model's validity consists of applying repetitive time-variant voltage waveforms-pulses, sine waves, ramps, and noise-until breakdown and, consequently, comparing prediction to reality. The breakdown distribution is initially derived from DC measurements, with the model predicting both the center and the shape of the distribution.

[1]  Jordi Suñé,et al.  Trapped charge distributions in thin (10 nm) SiO/sub 2/ films subjected to static and dynamic stresses , 1998 .

[2]  H. Gossner,et al.  Reliability aspects of gate oxide under ESD pulse stress , 2007 .

[3]  Jordi Suñé,et al.  Power-law voltage acceleration: A key element for ultra-thin gate oxide reliability , 2005, Microelectron. Reliab..

[4]  J. Stathis,et al.  Dielectric breakdown mechanisms in gate oxides , 2005 .

[5]  William J. Padgett,et al.  Weibull Distribution , 2011, International Encyclopedia of Statistical Science.

[6]  A. Bravaix,et al.  Ultra-thin gate oxide reliability in the ESD time domain , 2006, 2006 Electrical Overstress/Electrostatic Discharge Symposium.

[7]  J.S. Suehle,et al.  Time-dependent breakdown of ultra-thin SiO2 gate dielectrics under pulsed biased stress , 2001, IEEE Electron Device Letters.

[8]  J. Suehle.  Ultrathin gate oxide reliability: physical models, statistics, and characterization , 2002 .

[9]  Jordi Suñé,et al.  Experimental evidence of T/sub BD/ power-law for voltage dependence of oxide breakdown in ultrathin gate oxides , 2002 .

[10]  Jean-Jacques Hajjar,et al.  Prediction of Gate Dielectric Breakdown in the CDM timescale utilizing very fast transmission line pulsing , 2009, 2009 IEEE International Reliability Physics Symposium.

[11]  Chenming Hu,et al.  Statistical modeling of silicon dioxide reliability , 1988 .

[12]  J. McPherson,et al.  Acceleration Factors for Thin Gate Oxide Stressing , 1985, 23rd International Reliability Physics Symposium.

[13]  Alan Mathewson,et al.  Correlation of SiO2 lifetimes from constant and ramped voltage measurements , 1996 .

[14]  Ernest Y. Wu,et al.  Comprehensive physics-based breakdown model for reliability assessment of oxides with thickness ranging from 1 nm up to 12 nm , 2009, 2009 IEEE International Reliability Physics Symposium.

[15]  J. Suehle,et al.  Low electric field breakdown of thin SiO/sub 2/ films under static and dynamic stress , 1997 .

[16]  S. Malobabic,et al.  Gate oxide evaluation under very fast transmission line pulse (VFTLP) CDM-type stress , 2008, 2008 7th International Caribbean Conference on Devices, Circuits and Systems.

[17]  Jordi Suñé,et al.  Degradation and breakdown of thin silicon dioxide films under dynamic electrical stress , 1996 .

[18]  Anabela Veloso,et al.  Reliability screening of high-k dielectrics based on voltage ramp stress , 2007, Microelectron. Reliab..