An analytical model for a spoke type variable flux permanent magnet motor in no-load condition

This paper presents an analytical model, for a new spoke type variable flux machine, with AlNiCo magnets, in the no-load condition. This method is based on the solution of a simple magnetic equivalent circuit of spoke type machines. The effect of stator slots on the air gap magnetic flux density is studied and uneven air gap length is modeled. Based on the no-load air gap magnetic flux density, the mean value of torque is calculated. The analytical and finite element design procedure of spoke type variable flux motor are reviewed briefly. Both analytical and finite element models are verified using test results of the prototyped motor and the effect of magnet length on the torque mean value is discussed, as well.

[1]  M. R. Mohammad,et al.  Design and Analysis of a Spoke Type Motor With Segmented Pushing Permanent Magnet for Concentrating Air-Gap Flux Density , 2013, IEEE Transactions on Magnetics.

[2]  D. Lin,et al.  Analytical Prediction of Cogging Torque for Spoke Type Permanent Magnet Machines , 2012, IEEE Transactions on Magnetics.

[3]  T.J.E. Miller,et al.  Field-weakening performance of brushless synchronous AC motor drives , 1994 .

[4]  Massimo Barcaro,et al.  Interior PM Machines Using Ferrite to Replace Rare-Earth Surface PM Machines , 2014, IEEE Transactions on Industry Applications.

[5]  Lionel Vido,et al.  Hybrid Excitation Synchronous Machines: Energy-Efficient Solution for Vehicles Propulsion , 2009, IEEE Transactions on Vehicular Technology.

[6]  Chuang Yu,et al.  Design, Analysis, and Control of DC-Excited Memory Motors , 2011, IEEE Transactions on Energy Conversion.

[7]  Duane C. Hanselman,et al.  Brushless Permanent-Magnet Motor Design , 1994 .

[8]  N. Bianchi,et al.  Performance comparison between switching-flux and IPM machine with rare earth and ferrite PMs , 2012, 2012 XXth International Conference on Electrical Machines.

[9]  Gyu-Hong Kang,et al.  Optimal design of spoke type BLDC motor considering irreversible demagnetization of permanent magnet , 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

[10]  T. Lubin,et al.  Analytical Prediction of Magnetic Field in Parallel Double Excitation and Spoke-Type Permanent-Magnet Machines Accounting for Tooth-Tips and Shape of Polar Pieces , 2012, IEEE Transactions on Magnetics.

[11]  Thomas M. Jahns,et al.  Flux-Weakening Regime Operation of an Interior Permanent-Magnet Synchronous Motor Drive , 1987, IEEE Transactions on Industry Applications.

[12]  Yangguang Yan,et al.  Investigation of Hybrid Excitation Synchronous Machines With Axial Auxiliary Air-Gaps and Non-Uniform Air-Gaps , 2014, IEEE Transactions on Industry Applications.

[13]  Thomas A. Lipo,et al.  Field Weakening in Buried Permanent Magnet AC Motor Drives , 1985, IEEE Transactions on Industry Applications.

[14]  Pragasen Pillay,et al.  Design of Variable-Flux Permanent-Magnet Machines Using Alnico Magnets , 2015, IEEE Transactions on Industry Applications.

[15]  V. Ostovic,et al.  Memory motors , 2003 .

[16]  J. De La Ree,et al.  Magnet shaping to reduce induced voltage harmonics in PM machines with surface mounted magnets , 1991 .

[17]  Z. Zhu,et al.  Instantaneous magnetic field distribution in brushless permanent magnet DC motors. I. Open-circuit field , 1993 .

[18]  Nicola Bianchi,et al.  Permanent magnet volume minimization of spoke type fractional slot synchronous motors , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).